File content as of revision 7:8055eb42a0f0:

//https://translate.googleusercontent.com/translate_c?anno=2&depth=1&hl=ja&prev=search&rurl=translate.google.co.jp&sl=en&sp=nmt4&tl=ja&u=https://os.mbed.com/users/4180_1/code/ESP8266-configuration-mbed-LPC1768/&usg=ALkJrhgXBJ5ngwZUdq75QAiih4mRDcyBfg
//wifi接続確認
#include "mbed.h"

Serial pc(USBTX, USBRX);
Serial esp(p13, p14); // tx, rx
DigitalOut reset(p26);
Timer t;

int  ount,ended,timeout;
char buf[1024];
char snd[255];

//char ssid[32] = "iP-202004T0898";
//char pwd [32] = "ew3a9baz9o2vk";
//char ssid[32] = "802ZTa-00311F";     // enter WiFi router ssid inside the quotes
//char pwd [32] = "0126954a"; // enter WiFi router password inside the quotes
//char ssid[32] = "802ZTa-008AD0";
//char pwd [32] = "0355967a";

//char ssid[32] = "802ZTa-003243";
//char pwd [32] = "0129875a";

char ssid[32] = "mbed06";
char pwd [32] = "0123456789a";

void SendCMD(),getreply(),ESPconfig(),ESPsetbaudrate();


int main()
{
    reset=0; //hardware reset for 8266
    pc.baud(115200);  // set what you want here depending on your terminal program speed
    pc.printf("\f\n\r-------------ESP8266 Hardware Reset-------------\n\r");
    wait(0.5);
    reset=1;
    timeout=2;
    getreply();

    esp.baud(115200);   // change this to the new ESP8266 baudrate if it is changed at any time.

    //ESPsetbaudrate();   //******************  include this routine to set a different ESP8266 baudrate  ******************

    ESPconfig();        //******************  include Config to set the ESP8266 configuration  ***********************



    // continuosly get AP list and IP
    while(1) {
//        pc.printf("\n---------- Listing Acces Points ----------\r\n");
//        strcpy(snd, "AT+CWLAP\r\n");
//        SendCMD();
//        timeout=15;
//        getreply();
//        pc.printf(buf);
//        wait(2);
        pc.printf("\n---------- Get IP and MAC ----------\r\n");
        strcpy(snd, "AT+CIFSR\r\n");
        SendCMD();
        timeout=10;
        getreply();
        pc.printf(buf);
        wait(2);
    }

}

// Sets new ESP8266 baurate, change the esp.baud(xxxxx) to match your new setting once this has been executed
void ESPsetbaudrate()
{
    strcpy(snd, "AT+CIOBAUD=115200\r\n");   // change the numeric value to the required baudrate
    SendCMD();
}

//  +++++++++++++++++++++++++++++++++ This is for ESP8266 config only, run this once to set up the ESP8266 +++++++++++++++
void ESPconfig()
{
    wait(5);
    strcpy(snd,"AT\r\n");
    SendCMD();
    wait(1);
    strcpy(snd,"AT\r\n");
    SendCMD();
    wait(1);
    strcpy(snd,"AT\r\n");
    SendCMD();
    timeout=1;
    getreply();
    wait(1);
    pc.printf("\f---------- Starting ESP Config ----------\r\n\n");

    pc.printf("---------- Reset & get Firmware ----------\r\n");
    strcpy(snd,"AT+RST\r\n");
    SendCMD();
    timeout=5;
    getreply();
    pc.printf(buf);

    wait(2);

    pc.printf("\n---------- Get Version ----------\r\n");
    strcpy(snd,"AT+GMR\r\n");
    SendCMD();
    timeout=4;
    getreply();
    pc.printf(buf);

    wait(3);

    // set CWMODE to 1=Station,2=AP,3=BOTH, default mode 1 (Station)
    pc.printf("\n---------- Setting Mode ----------\r\n");
    strcpy(snd, "AT+CWMODE=2\r\n");
    SendCMD();
    timeout=4;
    getreply();
    pc.printf(buf);

    wait(2);

    // set CIPMUX to 0=Single,1=Multi
    pc.printf("\n---------- Setting Connection Mode ----------\r\n");
    strcpy(snd, "AT+CIPMUX=0\r\n");
    SendCMD();
    timeout=4;
    getreply();
    pc.printf(buf);

    wait(2);

//    pc.printf("\n---------- Listing Access Points ----------\r\n");
//    strcpy(snd, "AT+CWLAP\r\n");
//    SendCMD();
//    timeout=15;
//    getreply();
//    pc.printf(buf);
//
//    wait(2);
//---------------------------------------------------------------------------------------------------------------------------------------------
//    pc.printf("\n---------- Connecting to AP ----------\r\n");
//    pc.printf("ssid = %s   pwd = %s\r\n",ssid,pwd);
//    strcpy(snd, "AT+CWJAP=\"");
//    strcat(snd, ssid);
//    strcat(snd, "\",\""); //  "," を入力
//    strcat(snd, pwd);
//    strcat(snd, "\"\r\n"); // "を入力し改行             //「AT+CWJAP="ssid","pwd"」
//    SendCMD();
//    timeout=10;
//    getreply();
//    pc.printf(buf);
//
//    wait(5);


    pc.printf("\n---------- APmode set ----------\r\n");


    
    pc.printf("ssid = %s   pwd = %s\r\n",ssid,pwd);
    strcpy(snd, "AT+CWSAP_DEF=\"");
    strcat(snd, ssid);
    strcat(snd, "\",\""); //  "," を入力
    strcat(snd, pwd);
    strcat(snd, "\",");
    strcat(snd, "5");   //<chl>: channel ID. 
    strcat(snd, ",");
    strcat(snd, "4");   //<ecn>: encryption method; WEP is notsupported.(0:OPEN, 2:WPA_PSK, 3:WPA2_PSK, 4:WPA_WPA2_PSK)
    strcat(snd, ",");
    strcat(snd, "1");   // <max conn>: max connect. 
    strcat(snd, "\r\n"); // "を入力し改行             //「AT+CWJAP="ssid","pwd",5,3」
    SendCMD();
    timeout=10;
    getreply();
    pc.printf(buf);

    wait(5);

//--------------------------------------------------------------------------------------------------------------------------------------
    pc.printf("\n---------- Get IP's ----------\r\n");
    strcpy(snd, "AT+CIFSR\r\n");
    SendCMD();
    timeout=3;
    getreply();
    pc.printf(buf);

    wait(1);

    pc.printf("\n---------- Get Connection Status ----------\r\n");
    strcpy(snd, "AT+CIPSTATUS\r\n");
    SendCMD();
    timeout=5;
    getreply();
    pc.printf(buf);

    pc.printf("\n\n\n  If you get a valid (non zero) IP, ESP8266 has been set up.\r\n");
    pc.printf("  Run this if you want to reconfig the ESP8266 at any time.\r\n");
    pc.printf("  It saves the SSID and password settings internally\r\n");
    wait(10);
}

void SendCMD()
{
    esp.printf("%s", snd);
}

void getreply()
{
    memset(buf, '\0', sizeof(buf));
    t.start();
    ended=0;
    ount=0;
    while(!ended) {
        if(esp.readable()) {
            buf[ount] = esp.getc();
            ount++;
        }
        if(t.read() > timeout) {
            ended = 1;
            t.stop();
            t.reset();
        }
    }
}