SPI Hello World

Fork of SPI_HelloWorld_Mbed by Mbed

Note

You will need to redefine the SPI pins to match the pins on your board to run this example. The pin mapping can be found on the board's Platform page.

API

API reference

Import librarymbed

No documentation found.
Revision:
0:466ad3f38b6b
Child:
2:34bd7b8d30f9
diff -r 000000000000 -r 466ad3f38b6b main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Tue Feb 12 17:25:49 2013 +0000
@@ -0,0 +1,27 @@
+#include "mbed.h"
+ 
+SPI spi(p5, p6, p7); // mosi, miso, sclk
+DigitalOut cs(p8);
+ 
+int main() {
+    // Chip must be deselected
+    cs = 1;
+
+    // Setup the spi for 8 bit data, high steady state clock,
+    // second edge capture, with a 1MHz clock rate
+    spi.format(8,3);
+    spi.frequency(1000000);
+ 
+    // Select the device by seting chip select low
+    cs = 0;
+ 
+    // Send 0x8f, the command to read the WHOAMI register
+    spi.write(0x8F);
+ 
+    // Send a dummy byte to receive the contents of the WHOAMI register
+    int whoami = spi.write(0x00);
+    printf("WHOAMI register = 0x%X\n", whoami);
+ 
+    // Deselect the device
+    cs = 1;
+}
\ No newline at end of file