The HDK is used for creating mbed enabled hardware. Give your hardware project the power of mbed!
Fork of mbed-HDK by
HDK
CMSIS-DAP
HDK and CMSIS-DAP
Diff: NXP/LPC11U24-Lite/LPC11U24-Lite.sch
- Revision:
- 4:f63d27107b43
- Parent:
- 2:9aa761c69da4
- Child:
- 7:7336d99ec4fa
diff -r 6bd3dd3819ff -r f63d27107b43 NXP/LPC11U24-Lite/LPC11U24-Lite.sch --- a/NXP/LPC11U24-Lite/LPC11U24-Lite.sch Sat Sep 14 09:08:13 2013 +0100 +++ b/NXP/LPC11U24-Lite/LPC11U24-Lite.sch Sat Sep 14 09:12:55 2013 +0100 @@ -375,185 +375,6 @@ <text x="-1.778" y="1.778" size="1.27" layer="25">>NAME</text> <text x="-1.778" y="-3.048" size="1.27" layer="27">>VALUE</text> </package> -<package name="MBED-ICS_LQFP64"> -<circle x="-3.818" y="3.818" radius="0.254" width="0.127" layer="21"/> -<wire x1="-5" y1="4" x2="-5" y2="-5" width="0.2032" layer="21"/> -<wire x1="-5" y1="-5" x2="5" y2="-5" width="0.2032" layer="21"/> -<wire x1="5" y1="-5" x2="5" y2="5" width="0.2032" layer="21"/> -<wire x1="5" y1="5" x2="-4" y2="5" width="0.2032" layer="21"/> -<wire x1="-4" y1="5" x2="-5" y2="4" width="0.2032" layer="21"/> -<smd name="1" x="-5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="2" x="-5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="3" x="-5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="4" x="-5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="5" x="-5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="6" x="-5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="7" x="-5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="8" x="-5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="9" x="-5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="10" x="-5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="11" x="-5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="12" x="-5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="13" x="-5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="14" x="-5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="15" x="-5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="16" x="-5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="17" x="-3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="18" x="-3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="19" x="-2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="20" x="-2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="21" x="-1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="22" x="-1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="23" x="-0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="24" x="-0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="25" x="0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="26" x="0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="27" x="1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="28" x="1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="29" x="2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="30" x="2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="31" x="3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="32" x="3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="33" x="5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="34" x="5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="35" x="5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="36" x="5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="37" x="5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="38" x="5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="39" x="5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="40" x="5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="41" x="5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="42" x="5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="43" x="5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="44" x="5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="45" x="5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="46" x="5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="47" x="5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/> -<smd name="48" x="5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/> -<smd name="49" x="3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="50" x="3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="51" x="2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="52" x="2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="53" x="1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="54" x="1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="55" x="0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="56" x="0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="57" x="-0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="58" x="-0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="59" x="-1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="60" x="-1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="61" x="-2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="62" x="-2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="63" x="-3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<smd name="64" x="-3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> -<text x="-3.81" y="6.35" size="1.27" layer="25" ratio="12">>NAME</text> -<text x="-3.81" y="-7.62" size="1.27" layer="27" ratio="12">>VALUE</text> -</package> -<package name="SWD-10-TAGCONNECT"> -<wire x1="-0.254" y1="3.683" x2="-0.254" y2="-0.127" width="0.127" layer="21"/> -<wire x1="-0.254" y1="-0.127" x2="-0.254" y2="-3.683" width="0.127" layer="21"/> -<wire x1="-0.254" y1="-3.683" x2="1.016" y2="-3.683" width="0.127" layer="21"/> -<wire x1="1.016" y1="-3.683" x2="6.096" y2="-3.683" width="0.127" layer="21"/> -<wire x1="6.096" y1="-3.683" x2="6.096" y2="3.683" width="0.127" layer="21"/> -<wire x1="6.096" y1="3.683" x2="-0.254" y2="3.683" width="0.127" layer="21"/> -<wire x1="1.016" y1="-3.683" x2="1.016" y2="-0.127" width="0.127" layer="21"/> -<wire x1="1.016" y1="-0.127" x2="-0.254" y2="-0.127" width="0.127" layer="21"/> -<smd name="P$1" x="0.381" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$3" x="1.651" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$2" x="0.381" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$4" x="1.651" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$5" x="2.921" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$6" x="2.921" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$7" x="4.191" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$8" x="4.191" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$9" x="5.461" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$10" x="5.461" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<text x="0" y="-5.08" size="1.27" layer="25">>NAME</text> -<text x="0" y="-6.858" size="1.27" layer="27">>VALUE</text> -<hole x="-0.889" y="0" drill="1"/> -<hole x="6.731" y="1.016" drill="1"/> -<hole x="6.731" y="-1.016" drill="1"/> -</package> -<package name="SWD-10-SMD"> -<wire x1="-0.254" y1="3.683" x2="-0.254" y2="-0.381" width="0.127" layer="21"/> -<wire x1="-0.254" y1="-0.381" x2="-0.254" y2="-3.683" width="0.127" layer="21"/> -<wire x1="-0.254" y1="-3.683" x2="1.016" y2="-3.683" width="0.127" layer="21"/> -<wire x1="1.016" y1="-3.683" x2="6.096" y2="-3.683" width="0.127" layer="21"/> -<wire x1="6.096" y1="-3.683" x2="6.096" y2="3.683" width="0.127" layer="21"/> -<wire x1="6.096" y1="3.683" x2="-0.254" y2="3.683" width="0.127" layer="21"/> -<wire x1="1.016" y1="-3.683" x2="1.016" y2="-0.381" width="0.127" layer="21"/> -<wire x1="1.016" y1="-0.381" x2="-0.254" y2="-0.381" width="0.127" layer="21"/> -<smd name="P$1" x="0.381" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$3" x="1.651" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$2" x="0.381" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$4" x="1.651" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$5" x="2.921" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$6" x="2.921" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$7" x="4.191" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$8" x="4.191" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$9" x="5.461" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<smd name="P$10" x="5.461" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/> -<text x="0" y="-5.08" size="1.27" layer="25">>NAME</text> -<text x="0" y="-6.858" size="1.27" layer="27">>VALUE</text> -</package> -<package name="SWD-10-PTH"> -<wire x1="2.032" y1="1.27" x2="2.032" y2="-6.35" width="0.254" layer="21"/> -<wire x1="2.032" y1="-6.35" x2="-0.762" y2="-6.35" width="0.254" layer="21"/> -<wire x1="-0.762" y1="-6.35" x2="-0.762" y2="1.27" width="0.254" layer="21"/> -<wire x1="-0.762" y1="1.27" x2="-0.758" y2="1.27" width="0.254" layer="21"/> -<wire x1="-0.758" y1="1.27" x2="2.048" y2="1.28" width="0.254" layer="21"/> -<wire x1="-0.758" y1="1.27" x2="2.032" y2="1.27" width="0.254" layer="21"/> -<wire x1="-1.852" y1="-8.61" x2="-1.852" y2="3.46" width="0.254" layer="21"/> -<wire x1="3.138" y1="-8.62" x2="3.138" y2="3.46" width="0.254" layer="21"/> -<wire x1="-1.842" y1="3.49" x2="3.092" y2="3.49" width="0.254" layer="21"/> -<wire x1="-1.842" y1="-8.61" x2="3.092" y2="-8.61" width="0.254" layer="21"/> -<wire x1="-1.59" y1="-3.922" x2="-1.59" y2="-1.128" width="0.4064" layer="21"/> -<pad name="4" x="1.27" y="-1.27" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="1" x="0" y="0" drill="0.6096" diameter="0.9" rot="R180"/> -<pad name="2" x="1.27" y="0" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="3" x="0" y="-1.27" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="5" x="0" y="-2.54" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="6" x="1.27" y="-2.54" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="7" x="0" y="-3.81" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="8" x="1.27" y="-3.81" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="9" x="0" y="-5.08" drill="0.6096" diameter="0.9" rot="R90"/> -<pad name="10" x="1.27" y="-5.08" drill="0.6096" diameter="0.9" rot="R90"/> -<text x="-1.317" y="1.818" size="1.016" layer="21">1</text> -<text x="-1.27" y="3.81" size="1.016" layer="25">>NAME</text> -<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/> -<rectangle x1="-0.254" y1="-1.524" x2="0.254" y2="-1.016" layer="51"/> -<rectangle x1="1.016" y1="-0.254" x2="1.524" y2="0.254" layer="51"/> -<rectangle x1="1.016" y1="-1.524" x2="1.524" y2="-1.016" layer="51"/> -<rectangle x1="-0.254" y1="-2.794" x2="0.254" y2="-2.286" layer="51"/> -<rectangle x1="1.016" y1="-2.794" x2="1.524" y2="-2.286" layer="51"/> -<rectangle x1="-0.254" y1="-4.064" x2="0.254" y2="-3.556" layer="51"/> -<rectangle x1="1.016" y1="-4.064" x2="1.524" y2="-3.556" layer="51"/> -<rectangle x1="-0.254" y1="-5.334" x2="0.254" y2="-4.826" layer="51"/> -<rectangle x1="1.016" y1="-5.334" x2="1.524" y2="-4.826" layer="51"/> -</package> -<package name="DTSM-32S-B"> -<smd name="P$1" x="-2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/> -<smd name="P$2" x="2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/> -<wire x1="-3" y1="1.8" x2="3" y2="1.8" width="0.127" layer="21"/> -<wire x1="3" y1="1.8" x2="3" y2="1" width="0.127" layer="21"/> -<wire x1="-3" y1="1.8" x2="-3" y2="1" width="0.127" layer="21"/> -<wire x1="-3" y1="-1.8" x2="3" y2="-1.8" width="0.127" layer="21"/> -<wire x1="3" y1="-1.8" x2="3" y2="-1" width="0.127" layer="21"/> -<wire x1="-3" y1="-1.8" x2="-3" y2="-1" width="0.127" layer="21"/> -<wire x1="-1.3" y1="0" x2="-0.4" y2="0" width="0.127" layer="21"/> -<wire x1="1.4" y1="0" x2="0.5" y2="0" width="0.127" layer="21"/> -<wire x1="-0.4" y1="0" x2="0.5" y2="0.4" width="0.127" layer="21"/> -<text x="-2.54" y="-3.81" size="1.016" layer="25" font="vector" ratio="12">>NAME</text> -</package> -<package name="SKRKAEE010"> -<smd name="P$1" x="-2.1" y="0" dx="0.8" dy="2" layer="1"/> -<smd name="P$2" x="2.1" y="0" dx="0.8" dy="2" layer="1"/> -<wire x1="-1.5" y1="1.1" x2="1.5" y2="1.1" width="0.1" layer="21"/> -<wire x1="1.5" y1="1.1" x2="1.5" y2="-1.1" width="0.1" layer="21"/> -<wire x1="1.5" y1="-1.1" x2="-1.5" y2="-1.1" width="0.1" layer="21"/> -<wire x1="-1.5" y1="-1.1" x2="-1.5" y2="1.1" width="0.1" layer="21"/> -<text x="-2.54" y="-2.54" size="1.016" layer="21" font="vector" ratio="12">>NAME</text> -</package> <package name="USB-A-H"> <description><b>USB Series A Hole Mounted</b></description> <wire x1="3.6957" y1="6.5659" x2="-10.287" y2="6.5659" width="0.127" layer="21"/> @@ -655,6 +476,103 @@ <pad name="VBUS" x="2.7178" y="4.7625" drill="0.9144" rot="R270"/> <text x="6.985" y="-5.08" size="1.27" layer="25" rot="R90">>NAME</text> </package> +<package name="MBED-ICS_LQFP64"> +<circle x="-3.818" y="3.818" radius="0.254" width="0.127" layer="21"/> +<wire x1="-5" y1="4" x2="-5" y2="-5" width="0.2032" layer="21"/> +<wire x1="-5" y1="-5" x2="5" y2="-5" width="0.2032" layer="21"/> +<wire x1="5" y1="-5" x2="5" y2="5" width="0.2032" layer="21"/> +<wire x1="5" y1="5" x2="-4" y2="5" width="0.2032" layer="21"/> +<wire x1="-4" y1="5" x2="-5" y2="4" width="0.2032" layer="21"/> +<smd name="1" x="-5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="2" x="-5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="3" x="-5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="4" x="-5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="5" x="-5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="6" x="-5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="7" x="-5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="8" x="-5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="9" x="-5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="10" x="-5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="11" x="-5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="12" x="-5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="13" x="-5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="14" x="-5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="15" x="-5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="16" x="-5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="17" x="-3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="18" x="-3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="19" x="-2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="20" x="-2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="21" x="-1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="22" x="-1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="23" x="-0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="24" x="-0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="25" x="0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="26" x="0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="27" x="1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="28" x="1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="29" x="2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="30" x="2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="31" x="3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="32" x="3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="33" x="5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="34" x="5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="35" x="5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="36" x="5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="37" x="5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="38" x="5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="39" x="5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="40" x="5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="41" x="5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="42" x="5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="43" x="5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="44" x="5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="45" x="5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="46" x="5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="47" x="5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/> +<smd name="48" x="5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/> +<smd name="49" x="3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="50" x="3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="51" x="2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="52" x="2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="53" x="1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="54" x="1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="55" x="0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="56" x="0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="57" x="-0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="58" x="-0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="59" x="-1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="60" x="-1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="61" x="-2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="62" x="-2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="63" x="-3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<smd name="64" x="-3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/> +<text x="-3.81" y="6.35" size="1.27" layer="25" ratio="12">>NAME</text> +<text x="-3.81" y="-7.62" size="1.27" layer="27" ratio="12">>VALUE</text> +</package> +<package name="DTSM-32S-B"> +<smd name="P$1" x="-2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/> +<smd name="P$2" x="2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/> +<wire x1="-3" y1="1.8" x2="3" y2="1.8" width="0.127" layer="21"/> +<wire x1="3" y1="1.8" x2="3" y2="1" width="0.127" layer="21"/> +<wire x1="-3" y1="1.8" x2="-3" y2="1" width="0.127" layer="21"/> +<wire x1="-3" y1="-1.8" x2="3" y2="-1.8" width="0.127" layer="21"/> +<wire x1="3" y1="-1.8" x2="3" y2="-1" width="0.127" layer="21"/> +<wire x1="-3" y1="-1.8" x2="-3" y2="-1" width="0.127" layer="21"/> +<wire x1="-1.3" y1="0" x2="-0.4" y2="0" width="0.127" layer="21"/> +<wire x1="1.4" y1="0" x2="0.5" y2="0" width="0.127" layer="21"/> +<wire x1="-0.4" y1="0" x2="0.5" y2="0.4" width="0.127" layer="21"/> +<text x="-2.54" y="-3.81" size="1.016" layer="25" font="vector" ratio="12">>NAME</text> +</package> +<package name="SKRKAEE010"> +<smd name="P$1" x="-2.1" y="0" dx="0.8" dy="2" layer="1"/> +<smd name="P$2" x="2.1" y="0" dx="0.8" dy="2" layer="1"/> +<wire x1="-1.5" y1="1.1" x2="1.5" y2="1.1" width="0.1" layer="21"/> +<wire x1="1.5" y1="1.1" x2="1.5" y2="-1.1" width="0.1" layer="21"/> +<wire x1="1.5" y1="-1.1" x2="-1.5" y2="-1.1" width="0.1" layer="21"/> +<wire x1="-1.5" y1="-1.1" x2="-1.5" y2="1.1" width="0.1" layer="21"/> +<text x="-2.54" y="-2.54" size="1.016" layer="21" font="vector" ratio="12">>NAME</text> +</package> <package name="MBED-ENABLED-LOGO-250X250-MIL"> <rectangle x1="-0.0127" y1="-0.01143125" x2="6.3373" y2="0.01143125" layer="21"/> <rectangle x1="-0.0127" y1="0.01143125" x2="6.3373" y2="0.03454375" layer="21"/> @@ -4362,6 +4280,17 @@ <pin name="1" x="0" y="2.54" visible="off" length="point" direction="pas" rot="R270"/> <pin name="2" x="0" y="-2.54" visible="off" length="point" direction="pas" rot="R90"/> </symbol> +<symbol name="USB-1"> +<wire x1="5.08" y1="8.89" x2="0" y2="8.89" width="0.254" layer="94"/> +<wire x1="0" y1="8.89" x2="0" y2="-1.27" width="0.254" layer="94"/> +<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.254" layer="94"/> +<text x="3.81" y="0" size="2.54" layer="94" rot="R90">USB</text> +<pin name="D+" x="-2.54" y="7.62" visible="pad" length="short"/> +<pin name="D-" x="-2.54" y="5.08" visible="pad" length="short"/> +<pin name="GND" x="-2.54" y="0" visible="pad" length="short"/> +<pin name="VBUS" x="-2.54" y="2.54" visible="pad" length="short"/> +<text x="0" y="10.16" size="1.778" layer="95">>NAME</text> +</symbol> <symbol name="MBED_HDK"> <wire x1="0" y1="0" x2="0" y2="190.5" width="0.3048" layer="94"/> <wire x1="0" y1="190.5" x2="276.86" y2="190.5" width="0.3048" layer="94"/> @@ -4460,34 +4389,6 @@ <text x="-3.556" y="4.826" size="1.778" layer="96">>VALUE</text> <pin name="+3,3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/> </symbol> -<symbol name="SWD-10"> -<wire x1="0" y1="20.32" x2="0" y2="0" width="0.254" layer="94"/> -<wire x1="0" y1="0" x2="22.86" y2="0" width="0.254" layer="94"/> -<wire x1="22.86" y1="0" x2="22.86" y2="20.32" width="0.254" layer="94"/> -<wire x1="22.86" y1="20.32" x2="0" y2="20.32" width="0.254" layer="94"/> -<text x="0" y="21.59" size="1.778" layer="95">>NAME</text> -<text x="7.62" y="16.51" size="1.778" layer="94">SWD-10</text> -<text x="1.27" y="12.7" size="1.4224" layer="94">VCC</text> -<text x="21.59" y="13.97" size="1.4224" layer="94" rot="R180">SWDIO/TMS</text> -<text x="1.27" y="10.16" size="1.4224" layer="94">GND</text> -<text x="1.27" y="7.62" size="1.4224" layer="94">GND</text> -<text x="1.27" y="2.54" size="1.4224" layer="94">GND</text> -<text x="21.59" y="3.81" size="1.4224" layer="94" rot="R180">RESET</text> -<text x="21.59" y="6.35" size="1.4224" layer="94" rot="R180">NC/TDI</text> -<text x="1.27" y="5.08" size="1.4224" layer="94">KEY</text> -<text x="21.59" y="8.89" size="1.4224" layer="94" rot="R180">SWO/TDO</text> -<text x="21.59" y="11.43" size="1.4224" layer="94" rot="R180">SWCLK/TCLK</text> -<pin name="P$1" x="-5.08" y="12.7" visible="off" length="middle"/> -<pin name="P$2" x="27.94" y="12.7" visible="off" length="middle" rot="R180"/> -<pin name="P$3" x="-5.08" y="10.16" visible="off" length="middle"/> -<pin name="P$4" x="27.94" y="10.16" visible="off" length="middle" rot="R180"/> -<pin name="P$5" x="-5.08" y="7.62" visible="off" length="middle"/> -<pin name="P$6" x="27.94" y="7.62" visible="off" length="middle" rot="R180"/> -<pin name="P$7" x="-5.08" y="5.08" visible="off" length="middle"/> -<pin name="P$8" x="27.94" y="5.08" visible="off" length="middle" rot="R180"/> -<pin name="P$9" x="-5.08" y="2.54" visible="off" length="middle"/> -<pin name="P$10" x="27.94" y="2.54" visible="off" length="middle" rot="R180"/> -</symbol> <symbol name="TS"> <wire x1="-3.175" y1="0" x2="-2.54" y2="0" width="0.254" layer="94"/> <wire x1="2.54" y1="0" x2="3.175" y2="0" width="0.254" layer="94"/> @@ -4505,17 +4406,6 @@ <pin name="P" x="-5.08" y="0" visible="off" length="short" direction="pas"/> <pin name="S" x="5.08" y="0" visible="off" length="short" direction="pas" rot="R180"/> </symbol> -<symbol name="USB-1"> -<wire x1="5.08" y1="8.89" x2="0" y2="8.89" width="0.254" layer="94"/> -<wire x1="0" y1="8.89" x2="0" y2="-1.27" width="0.254" layer="94"/> -<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.254" layer="94"/> -<text x="3.81" y="0" size="2.54" layer="94" rot="R90">USB</text> -<pin name="D+" x="-2.54" y="7.62" visible="pad" length="short"/> -<pin name="D-" x="-2.54" y="5.08" visible="pad" length="short"/> -<pin name="GND" x="-2.54" y="0" visible="pad" length="short"/> -<pin name="VBUS" x="-2.54" y="2.54" visible="pad" length="short"/> -<text x="0" y="10.16" size="1.778" layer="95">>NAME</text> -</symbol> <symbol name="MBED-ENABLED-LOGO"> <text x="0" y="2.54" size="1.778" layer="94">mbed</text> <text x="0" y="0" size="1.778" layer="94">Enabled</text> @@ -4744,6 +4634,69 @@ </device> </devices> </deviceset> +<deviceset name="USB" prefix="CON"> +<description><b>USB Connectors</b><p></description> +<gates> +<gate name="A" symbol="USB-1" x="0" y="0"/> +</gates> +<devices> +<device name="-A-H" package="USB-A-H"> +<connects> +<connect gate="A" pin="D+" pad="D+"/> +<connect gate="A" pin="D-" pad="D-"/> +<connect gate="A" pin="GND" pad="GND"/> +<connect gate="A" pin="VBUS" pad="VBUS"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-A-S" package="USB-A-S"> +<connects> +<connect gate="A" pin="D+" pad="D+"/> +<connect gate="A" pin="D-" pad="D-"/> +<connect gate="A" pin="GND" pad="GND"/> +<connect gate="A" pin="VBUS" pad="VBUS"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-B-H" package="USB-B-H"> +<connects> +<connect gate="A" pin="D+" pad="D+"/> +<connect gate="A" pin="D-" pad="D-"/> +<connect gate="A" pin="GND" pad="GND"/> +<connect gate="A" pin="VBUS" pad="VBUS"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-MB-S" package="USB-MB-S"> +<connects> +<connect gate="A" pin="D+" pad="D+"/> +<connect gate="A" pin="D-" pad="D-"/> +<connect gate="A" pin="GND" pad="GND"/> +<connect gate="A" pin="VBUS" pad="VBUS"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +<device name="-A-V" package="USB-A-V"> +<connects> +<connect gate="A" pin="D+" pad="D+"/> +<connect gate="A" pin="D-" pad="D-"/> +<connect gate="A" pin="GND" pad="GND"/> +<connect gate="A" pin="VBUS" pad="VBUS"/> +</connects> +<technologies> +<technology name=""/> +</technologies> +</device> +</devices> +</deviceset> <deviceset name="MBED_HDK"> <gates> <gate name="G$1" symbol="MBED_HDK" x="0" y="0"/> @@ -4859,64 +4812,6 @@ </device> </devices> </deviceset> -<deviceset name="SWD-10" prefix="CON"> -<gates> -<gate name="G$1" symbol="SWD-10" x="-5.08" y="0"/> -</gates> -<devices> -<device name="_TC" package="SWD-10-TAGCONNECT"> -<connects> -<connect gate="G$1" pin="P$1" pad="P$1"/> -<connect gate="G$1" pin="P$10" pad="P$10"/> -<connect gate="G$1" pin="P$2" pad="P$2"/> -<connect gate="G$1" pin="P$3" pad="P$3"/> -<connect gate="G$1" pin="P$4" pad="P$4"/> -<connect gate="G$1" pin="P$5" pad="P$5"/> -<connect gate="G$1" pin="P$6" pad="P$6"/> -<connect gate="G$1" pin="P$7" pad="P$7"/> -<connect gate="G$1" pin="P$8" pad="P$8"/> -<connect gate="G$1" pin="P$9" pad="P$9"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="_SMD" package="SWD-10-SMD"> -<connects> -<connect gate="G$1" pin="P$1" pad="P$1"/> -<connect gate="G$1" pin="P$10" pad="P$10"/> -<connect gate="G$1" pin="P$2" pad="P$2"/> -<connect gate="G$1" pin="P$3" pad="P$3"/> -<connect gate="G$1" pin="P$4" pad="P$4"/> -<connect gate="G$1" pin="P$5" pad="P$5"/> -<connect gate="G$1" pin="P$6" pad="P$6"/> -<connect gate="G$1" pin="P$7" pad="P$7"/> -<connect gate="G$1" pin="P$8" pad="P$8"/> -<connect gate="G$1" pin="P$9" pad="P$9"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="_PTH" package="SWD-10-PTH"> -<connects> -<connect gate="G$1" pin="P$1" pad="1"/> -<connect gate="G$1" pin="P$10" pad="10"/> -<connect gate="G$1" pin="P$2" pad="2"/> -<connect gate="G$1" pin="P$3" pad="3"/> -<connect gate="G$1" pin="P$4" pad="4"/> -<connect gate="G$1" pin="P$5" pad="5"/> -<connect gate="G$1" pin="P$6" pad="6"/> -<connect gate="G$1" pin="P$7" pad="7"/> -<connect gate="G$1" pin="P$8" pad="8"/> -<connect gate="G$1" pin="P$9" pad="9"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -</devices> -</deviceset> <deviceset name="SPST" prefix="SW"> <gates> <gate name="G$1" symbol="TS" x="0" y="0"/> @@ -4942,69 +4837,6 @@ </device> </devices> </deviceset> -<deviceset name="USB" prefix="CON"> -<description><b>USB Connectors</b><p></description> -<gates> -<gate name="A" symbol="USB-1" x="0" y="0"/> -</gates> -<devices> -<device name="-A-H" package="USB-A-H"> -<connects> -<connect gate="A" pin="D+" pad="D+"/> -<connect gate="A" pin="D-" pad="D-"/> -<connect gate="A" pin="GND" pad="GND"/> -<connect gate="A" pin="VBUS" pad="VBUS"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-A-S" package="USB-A-S"> -<connects> -<connect gate="A" pin="D+" pad="D+"/> -<connect gate="A" pin="D-" pad="D-"/> -<connect gate="A" pin="GND" pad="GND"/> -<connect gate="A" pin="VBUS" pad="VBUS"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-B-H" package="USB-B-H"> -<connects> -<connect gate="A" pin="D+" pad="D+"/> -<connect gate="A" pin="D-" pad="D-"/> -<connect gate="A" pin="GND" pad="GND"/> -<connect gate="A" pin="VBUS" pad="VBUS"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-MB-S" package="USB-MB-S"> -<connects> -<connect gate="A" pin="D+" pad="D+"/> -<connect gate="A" pin="D-" pad="D-"/> -<connect gate="A" pin="GND" pad="GND"/> -<connect gate="A" pin="VBUS" pad="VBUS"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -<device name="-A-V" package="USB-A-V"> -<connects> -<connect gate="A" pin="D+" pad="D+"/> -<connect gate="A" pin="D-" pad="D-"/> -<connect gate="A" pin="GND" pad="GND"/> -<connect gate="A" pin="VBUS" pad="VBUS"/> -</connects> -<technologies> -<technology name=""/> -</technologies> -</device> -</devices> -</deviceset> <deviceset name="MBED-ENABLED-LOGO" prefix="SS"> <gates> <gate name="G$1" symbol="MBED-ENABLED-LOGO" x="2.54" y="2.54"/> @@ -5062,6 +4894,7 @@ <part name="R9" library="mbed-HDK" deviceset="R" device="0603" value="10k"/> <part name="U$14" library="mbed-HDK" deviceset="MBED_HDK" device=""/> <part name="U$6" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> +<part name="U$8" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> <part name="U$11" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> <part name="GND11" library="mbed-HDK" deviceset="GND" device=""/> <part name="GND13" library="mbed-HDK" deviceset="GND" device=""/> @@ -5072,41 +4905,41 @@ <part name="U$13" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> <part name="GND18" library="mbed-HDK" deviceset="GND" device=""/> <part name="U$12" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> -<part name="CON1" library="mbed-HDK" deviceset="SWD-10" device="_TC"/> -<part name="GND1" library="mbed-HDK" deviceset="GND" device=""/> +<part name="CON2" library="mbed-HDK" deviceset="USB" device="-MB-S"/> <part name="SW1" library="mbed-HDK" deviceset="SPST" device=""/> +<part name="GND1" library="mbed-HDK" deviceset="GND" device=""/> +<part name="R1" library="mbed-HDK" deviceset="R" device="0603" value="10k"/> +<part name="C1" library="mbed-HDK" deviceset="C" device="0603" value="100nF"/> +<part name="U$1" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> <part name="GND2" library="mbed-HDK" deviceset="GND" device=""/> -<part name="R1" library="mbed-HDK" deviceset="R" device="0603" value="10k"/> +<part name="SW2" library="mbed-HDK" deviceset="SPST" device=""/> +<part name="GND3" library="mbed-HDK" deviceset="GND" device=""/> +<part name="R2" library="mbed-HDK" deviceset="R" device="0603" value="10k"/> <part name="U$2" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> -<part name="C1" library="mbed-HDK" deviceset="C" device="0603" value="18pF"/> -<part name="R2" library="mbed-HDK" deviceset="R" device="0603" value="10k"/> -<part name="SW2" library="mbed-HDK" deviceset="SPST" device=""/> -<part name="U$3" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/> -<part name="GND3" library="mbed-HDK" deviceset="GND" device=""/> -<part name="CON2" library="mbed-HDK" deviceset="USB" device="-MB-S"/> <part name="SS1" library="mbed-HDK" deviceset="MBED-ENABLED-LOGO" device="MEDIUM"/> </parts> <sheets> <sheet> <plain> -<text x="25.4" y="170.18" size="1.778" layer="91">One cap per VDD3.3V pin</text> +<text x="43.18" y="170.18" size="1.778" layer="91">One cap per VDD3.3V pin</text> <text x="274.32" y="187.96" size="6.4516" layer="94" ratio="12" rot="R180">Target</text> +<text x="27.94" y="2.54" size="1.778" layer="97">Target LDO powered by VBUS of Interface or Target</text> </plain> <instances> -<instance part="GND30" gate="1" x="10.16" y="139.7"/> -<instance part="C9" gate="G$1" x="30.48" y="157.48" smashed="yes"> -<attribute name="NAME" x="34.036" y="159.258" size="1.778" layer="95"/> -<attribute name="VALUE" x="34.036" y="153.924" size="1.778" layer="96"/> +<instance part="GND30" gate="1" x="27.94" y="142.24" rot="R270"/> +<instance part="C9" gate="G$1" x="48.26" y="157.48" smashed="yes"> +<attribute name="NAME" x="51.816" y="159.258" size="1.778" layer="95"/> +<attribute name="VALUE" x="51.816" y="153.924" size="1.778" layer="96"/> </instance> <instance part="C11" gate="G$1" x="73.66" y="157.48"/> <instance part="C10" gate="G$1" x="63.5" y="157.48"/> -<instance part="C8" gate="G$1" x="15.24" y="157.48" smashed="yes"> -<attribute name="NAME" x="18.796" y="159.258" size="1.778" layer="95"/> -<attribute name="VALUE" x="18.796" y="153.924" size="1.778" layer="96"/> +<instance part="C8" gate="G$1" x="33.02" y="157.48" smashed="yes"> +<attribute name="NAME" x="36.576" y="159.258" size="1.778" layer="95"/> +<attribute name="VALUE" x="36.576" y="153.924" size="1.778" layer="96"/> </instance> -<instance part="C12" gate="G$1" x="15.24" y="121.92" smashed="yes" rot="R180"> -<attribute name="NAME" x="11.684" y="122.682" size="1.778" layer="95" rot="R180"/> -<attribute name="VALUE" x="11.684" y="120.396" size="1.778" layer="96" rot="R180"/> +<instance part="C12" gate="G$1" x="12.7" y="121.92" smashed="yes" rot="R180"> +<attribute name="NAME" x="9.144" y="122.682" size="1.778" layer="95" rot="R180"/> +<attribute name="VALUE" x="9.144" y="120.396" size="1.778" layer="96" rot="R180"/> </instance> <instance part="IC3" gate="G$1" x="137.16" y="114.3"/> <instance part="GND6" gate="1" x="226.06" y="35.56" rot="MR0"/> @@ -5117,47 +4950,47 @@ <instance part="R10" gate="G$1" x="236.22" y="76.2" rot="MR0"/> <instance part="R11" gate="G$1" x="236.22" y="66.04" rot="MR0"/> <instance part="T2" gate="G$1" x="203.2" y="45.72"/> -<instance part="Q1" gate="G$1" x="20.32" y="129.54"/> -<instance part="C13" gate="G$1" x="25.4" y="121.92" smashed="yes" rot="R180"> -<attribute name="NAME" x="31.496" y="121.158" size="1.778" layer="95"/> -<attribute name="VALUE" x="31.496" y="118.364" size="1.778" layer="96"/> +<instance part="Q1" gate="G$1" x="17.78" y="129.54"/> +<instance part="C13" gate="G$1" x="22.86" y="121.92" smashed="yes" rot="R180"> +<attribute name="NAME" x="26.416" y="121.158" size="1.778" layer="95"/> +<attribute name="VALUE" x="26.416" y="118.364" size="1.778" layer="96"/> </instance> -<instance part="GND10" gate="1" x="15.24" y="116.84"/> -<instance part="GND12" gate="1" x="25.4" y="116.84"/> -<instance part="R9" gate="G$1" x="60.96" y="99.06" rot="R90"/> +<instance part="GND10" gate="1" x="12.7" y="116.84"/> +<instance part="GND12" gate="1" x="22.86" y="116.84"/> +<instance part="R9" gate="G$1" x="53.34" y="106.68" rot="R90"/> <instance part="U$14" gate="G$1" x="0" y="0"/> <instance part="U$6" gate="G$1" x="203.2" y="35.56" rot="R180"/> -<instance part="U$11" gate="G$1" x="10.16" y="167.64"/> -<instance part="GND11" gate="1" x="81.28" y="12.7"/> -<instance part="GND13" gate="1" x="58.42" y="12.7"/> -<instance part="IC4" gate="G$1" x="55.88" y="30.48" smashed="yes"> -<attribute name="NAME" x="40.64" y="22.86" size="1.778" layer="95"/> -<attribute name="VALUE" x="40.64" y="20.32" size="1.778" layer="96"/> +<instance part="U$8" gate="G$1" x="53.34" y="96.52" rot="R180"/> +<instance part="U$11" gate="G$1" x="27.94" y="167.64"/> +<instance part="GND11" gate="1" x="96.52" y="10.16"/> +<instance part="GND13" gate="1" x="73.66" y="10.16"/> +<instance part="IC4" gate="G$1" x="71.12" y="27.94" smashed="yes"> +<attribute name="NAME" x="55.88" y="20.32" size="1.778" layer="95"/> +<attribute name="VALUE" x="55.88" y="17.78" size="1.778" layer="96"/> </instance> -<instance part="C17" gate="G$1" x="81.28" y="20.32"/> -<instance part="C16" gate="G$1" x="73.66" y="20.32" smashed="yes"> -<attribute name="NAME" x="64.516" y="19.558" size="1.778" layer="95"/> -<attribute name="VALUE" x="64.516" y="16.764" size="1.778" layer="96"/> +<instance part="C17" gate="G$1" x="96.52" y="17.78"/> +<instance part="C16" gate="G$1" x="88.9" y="17.78" smashed="yes"> +<attribute name="NAME" x="79.756" y="17.018" size="1.778" layer="95"/> +<attribute name="VALUE" x="79.756" y="14.224" size="1.778" layer="96"/> </instance> -<instance part="GND16" gate="1" x="73.66" y="12.7"/> -<instance part="U$13" gate="G$1" x="81.28" y="35.56"/> +<instance part="GND16" gate="1" x="88.9" y="10.16"/> +<instance part="U$13" gate="G$1" x="96.52" y="33.02"/> <instance part="GND18" gate="1" x="251.46" y="53.34" rot="MR0"/> -<instance part="U$12" gate="G$1" x="58.42" y="35.56"/> -<instance part="SW1" gate="G$1" x="53.34" y="99.06" rot="R90"/> -<instance part="GND2" gate="1" x="53.34" y="81.28"/> -<instance part="R1" gate="G$1" x="71.12" y="99.06" rot="R90"/> -<instance part="U$2" gate="G$1" x="60.96" y="76.2" rot="R180"/> -<instance part="C1" gate="G$1" x="22.86" y="73.66" smashed="yes" rot="R180"> -<attribute name="NAME" x="28.956" y="72.898" size="1.778" layer="95"/> -<attribute name="VALUE" x="28.956" y="70.104" size="1.778" layer="96"/> +<instance part="U$12" gate="G$1" x="73.66" y="33.02"/> +<instance part="CON2" gate="A" x="256.54" y="60.96"/> +<instance part="SW1" gate="G$1" x="22.86" y="71.12" rot="R90"/> +<instance part="GND1" gate="1" x="22.86" y="60.96"/> +<instance part="R1" gate="G$1" x="22.86" y="86.36" rot="R90"/> +<instance part="C1" gate="G$1" x="35.56" y="71.12" smashed="yes" rot="R180"> +<attribute name="NAME" x="39.116" y="72.898" size="1.778" layer="95"/> +<attribute name="VALUE" x="39.116" y="70.104" size="1.778" layer="96"/> </instance> -<instance part="R2" gate="G$1" x="22.86" y="88.9" rot="R90"/> -<instance part="SW2" gate="G$1" x="15.24" y="73.66" rot="R90"/> -<instance part="U$3" gate="G$1" x="22.86" y="99.06"/> -<instance part="GND3" gate="1" x="22.86" y="63.5"/> -<instance part="CON2" gate="A" x="256.54" y="60.96"/> -<instance part="CON1" gate="G$1" x="127" y="15.24"/> -<instance part="GND1" gate="1" x="114.3" y="7.62"/> +<instance part="U$1" gate="G$1" x="22.86" y="93.98"/> +<instance part="GND2" gate="1" x="35.56" y="60.96"/> +<instance part="SW2" gate="G$1" x="45.72" y="106.68" rot="R90"/> +<instance part="GND3" gate="1" x="45.72" y="96.52"/> +<instance part="R2" gate="G$1" x="60.96" y="106.68" rot="R90"/> +<instance part="U$2" gate="G$1" x="60.96" y="91.44" rot="R180"/> <instance part="SS1" gate="G$1" x="261.62" y="30.48"/> </instances> <busses> @@ -5167,20 +5000,19 @@ <segment> <wire x1="86.36" y1="142.24" x2="73.66" y2="142.24" width="0.1524" layer="91"/> <wire x1="73.66" y1="142.24" x2="63.5" y2="142.24" width="0.1524" layer="91"/> -<wire x1="63.5" y1="142.24" x2="30.48" y2="142.24" width="0.1524" layer="91"/> -<wire x1="30.48" y1="142.24" x2="15.24" y2="142.24" width="0.1524" layer="91"/> -<wire x1="15.24" y1="142.24" x2="10.16" y2="142.24" width="0.1524" layer="91"/> -<wire x1="10.16" y1="142.24" x2="10.16" y2="139.7" width="0.1524" layer="91"/> +<wire x1="63.5" y1="142.24" x2="48.26" y2="142.24" width="0.1524" layer="91"/> +<wire x1="48.26" y1="142.24" x2="33.02" y2="142.24" width="0.1524" layer="91"/> +<wire x1="33.02" y1="142.24" x2="27.94" y2="142.24" width="0.1524" layer="91"/> <wire x1="86.36" y1="144.78" x2="86.36" y2="142.24" width="0.1524" layer="91"/> <wire x1="73.66" y1="154.94" x2="73.66" y2="142.24" width="0.1524" layer="91"/> <wire x1="63.5" y1="154.94" x2="63.5" y2="142.24" width="0.1524" layer="91"/> -<wire x1="30.48" y1="154.94" x2="30.48" y2="142.24" width="0.1524" layer="91"/> -<wire x1="15.24" y1="154.94" x2="15.24" y2="142.24" width="0.1524" layer="91"/> +<wire x1="48.26" y1="154.94" x2="48.26" y2="142.24" width="0.1524" layer="91"/> +<wire x1="33.02" y1="154.94" x2="33.02" y2="142.24" width="0.1524" layer="91"/> <wire x1="86.36" y1="142.24" x2="101.6" y2="142.24" width="0.1524" layer="91"/> <wire x1="101.6" y1="144.78" x2="86.36" y2="144.78" width="0.1524" layer="91"/> <junction x="86.36" y="142.24"/> -<junction x="15.24" y="142.24"/> -<junction x="30.48" y="142.24"/> +<junction x="33.02" y="142.24"/> +<junction x="48.26" y="142.24"/> <junction x="63.5" y="142.24"/> <junction x="73.66" y="142.24"/> <pinref part="GND30" gate="1" pin="GND"/> @@ -5202,29 +5034,29 @@ <pinref part="C14" gate="G$1" pin="P$2"/> </segment> <segment> -<wire x1="15.24" y1="119.38" x2="15.24" y2="116.84" width="0.1524" layer="91"/> +<wire x1="12.7" y1="119.38" x2="12.7" y2="116.84" width="0.1524" layer="91"/> <pinref part="C12" gate="G$1" pin="P$1"/> <pinref part="GND10" gate="1" pin="GND"/> </segment> <segment> -<wire x1="25.4" y1="119.38" x2="25.4" y2="116.84" width="0.1524" layer="91"/> +<wire x1="22.86" y1="119.38" x2="22.86" y2="116.84" width="0.1524" layer="91"/> <pinref part="C13" gate="G$1" pin="P$1"/> <pinref part="GND12" gate="1" pin="GND"/> </segment> <segment> <pinref part="GND11" gate="1" pin="GND"/> -<wire x1="81.28" y1="17.78" x2="81.28" y2="12.7" width="0.1524" layer="91"/> +<wire x1="96.52" y1="15.24" x2="96.52" y2="10.16" width="0.1524" layer="91"/> <pinref part="C17" gate="G$1" pin="2"/> </segment> <segment> <pinref part="IC4" gate="G$1" pin="GND"/> <pinref part="GND13" gate="1" pin="GND"/> -<wire x1="58.42" y1="22.86" x2="58.42" y2="12.7" width="0.1524" layer="91"/> +<wire x1="73.66" y1="20.32" x2="73.66" y2="10.16" width="0.1524" layer="91"/> </segment> <segment> <pinref part="GND16" gate="1" pin="GND"/> <pinref part="C16" gate="G$1" pin="P$2"/> -<wire x1="73.66" y1="12.7" x2="73.66" y2="17.78" width="0.1524" layer="91"/> +<wire x1="88.9" y1="10.16" x2="88.9" y2="15.24" width="0.1524" layer="91"/> </segment> <segment> <wire x1="254" y1="60.96" x2="251.46" y2="60.96" width="0.1524" layer="91"/> @@ -5233,46 +5065,32 @@ <pinref part="CON2" gate="A" pin="GND"/> </segment> <segment> +<wire x1="22.86" y1="66.04" x2="22.86" y2="60.96" width="0.1524" layer="91"/> <pinref part="SW1" gate="G$1" pin="P"/> -<wire x1="53.34" y1="93.98" x2="53.34" y2="81.28" width="0.1524" layer="91"/> -<pinref part="GND2" gate="1" pin="GND"/> +<pinref part="GND1" gate="1" pin="GND"/> </segment> <segment> <pinref part="C1" gate="G$1" pin="P$1"/> -<pinref part="GND3" gate="1" pin="GND"/> -<wire x1="22.86" y1="63.5" x2="22.86" y2="66.04" width="0.1524" layer="91"/> -<pinref part="SW2" gate="G$1" pin="P"/> -<wire x1="22.86" y1="66.04" x2="22.86" y2="71.12" width="0.1524" layer="91"/> -<wire x1="15.24" y1="68.58" x2="15.24" y2="66.04" width="0.1524" layer="91"/> -<wire x1="15.24" y1="66.04" x2="22.86" y2="66.04" width="0.1524" layer="91"/> -<junction x="22.86" y="66.04"/> +<pinref part="GND2" gate="1" pin="GND"/> +<wire x1="35.56" y1="68.58" x2="35.56" y2="60.96" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="CON1" gate="G$1" pin="P$3"/> -<wire x1="121.92" y1="25.4" x2="114.3" y2="25.4" width="0.1524" layer="91"/> -<wire x1="114.3" y1="25.4" x2="114.3" y2="22.86" width="0.1524" layer="91"/> -<pinref part="CON1" gate="G$1" pin="P$5"/> -<wire x1="114.3" y1="22.86" x2="114.3" y2="17.78" width="0.1524" layer="91"/> -<wire x1="114.3" y1="17.78" x2="114.3" y2="7.62" width="0.1524" layer="91"/> -<wire x1="121.92" y1="22.86" x2="114.3" y2="22.86" width="0.1524" layer="91"/> -<pinref part="CON1" gate="G$1" pin="P$9"/> -<wire x1="121.92" y1="17.78" x2="114.3" y2="17.78" width="0.1524" layer="91"/> -<junction x="114.3" y="22.86"/> -<junction x="114.3" y="17.78"/> -<pinref part="GND1" gate="1" pin="GND"/> +<pinref part="SW2" gate="G$1" pin="P"/> +<pinref part="GND3" gate="1" pin="GND"/> +<wire x1="45.72" y1="101.6" x2="45.72" y2="96.52" width="0.1524" layer="91"/> </segment> </net> <net name="TGT_SBL_ISP" class="0"> <segment> -<wire x1="101.6" y1="121.92" x2="60.96" y2="121.92" width="0.1524" layer="91"/> -<wire x1="60.96" y1="121.92" x2="60.96" y2="104.14" width="0.1524" layer="91"/> +<wire x1="101.6" y1="121.92" x2="53.34" y2="121.92" width="0.1524" layer="91"/> +<wire x1="53.34" y1="121.92" x2="53.34" y2="111.76" width="0.1524" layer="91"/> <label x="78.74" y="121.92" size="1.778" layer="95"/> <pinref part="IC3" gate="G$1" pin="PIO0.1/CLKOUT/CT32B0M2/USB_FTOG"/> <pinref part="R9" gate="G$1" pin="P$2"/> -<pinref part="SW1" gate="G$1" pin="S"/> -<wire x1="53.34" y1="104.14" x2="53.34" y2="121.92" width="0.1524" layer="91"/> -<wire x1="53.34" y1="121.92" x2="60.96" y2="121.92" width="0.1524" layer="91"/> -<junction x="60.96" y="121.92"/> +<pinref part="SW2" gate="G$1" pin="S"/> +<wire x1="53.34" y1="121.92" x2="45.72" y2="121.92" width="0.1524" layer="91"/> +<wire x1="45.72" y1="121.92" x2="45.72" y2="111.76" width="0.1524" layer="91"/> +<junction x="53.34" y="121.92"/> </segment> </net> <net name="N$11" class="0"> @@ -5294,17 +5112,26 @@ <label x="91.44" y="109.22" size="1.778" layer="95" rot="R180"/> </segment> </net> +<net name="TGT_RX" class="0"> +<segment> +<wire x1="101.6" y1="68.58" x2="93.98" y2="68.58" width="0.1524" layer="91"/> +<label x="91.44" y="68.58" size="1.778" layer="95" rot="R180"/> +<pinref part="IC3" gate="G$1" pin="PIO0.18/RXD/CT32B0M0"/> +</segment> +</net> +<net name="TGT_TX" class="0"> +<segment> +<wire x1="101.6" y1="66.04" x2="93.98" y2="66.04" width="0.1524" layer="91"/> +<label x="91.44" y="66.04" size="1.778" layer="95" rot="R180"/> +<pinref part="IC3" gate="G$1" pin="PIO0.19/TXD/CT32B0M1"/> +</segment> +</net> <net name="TGT_SWCLK" class="0"> <segment> <wire x1="101.6" y1="93.98" x2="93.98" y2="93.98" width="0.1524" layer="91"/> <label x="91.44" y="93.98" size="1.778" layer="95" rot="R180"/> <pinref part="IC3" gate="G$1" pin="SWCLK/PIO0.10/SCK0/CT16B0M2"/> </segment> -<segment> -<pinref part="CON1" gate="G$1" pin="P$4"/> -<wire x1="154.94" y1="25.4" x2="160.02" y2="25.4" width="0.1524" layer="91"/> -<label x="162.56" y="25.4" size="1.778" layer="95"/> -</segment> </net> <net name="TGT_SWDIO" class="0"> <segment> @@ -5312,19 +5139,14 @@ <label x="91.44" y="81.28" size="1.778" layer="95" rot="R180"/> <pinref part="IC3" gate="G$1" pin="SWDIO/PIO0.15/AD4/CT32B1M2"/> </segment> -<segment> -<pinref part="CON1" gate="G$1" pin="P$2"/> -<wire x1="154.94" y1="27.94" x2="160.02" y2="27.94" width="0.1524" layer="91"/> -<label x="162.56" y="27.94" size="1.778" layer="95"/> -</segment> </net> <net name="N$12" class="0"> <segment> -<wire x1="101.6" y1="137.16" x2="15.24" y2="137.16" width="0.1524" layer="91"/> -<wire x1="15.24" y1="137.16" x2="15.24" y2="129.54" width="0.1524" layer="91"/> -<wire x1="15.24" y1="129.54" x2="15.24" y2="124.46" width="0.1524" layer="91"/> -<wire x1="17.78" y1="129.54" x2="15.24" y2="129.54" width="0.1524" layer="91"/> -<junction x="15.24" y="129.54"/> +<wire x1="101.6" y1="137.16" x2="12.7" y2="137.16" width="0.1524" layer="91"/> +<wire x1="12.7" y1="137.16" x2="12.7" y2="129.54" width="0.1524" layer="91"/> +<wire x1="12.7" y1="129.54" x2="12.7" y2="124.46" width="0.1524" layer="91"/> +<wire x1="15.24" y1="129.54" x2="12.7" y2="129.54" width="0.1524" layer="91"/> +<junction x="12.7" y="129.54"/> <pinref part="IC3" gate="G$1" pin="XTALIN"/> <pinref part="Q1" gate="G$1" pin="1"/> <pinref part="C12" gate="G$1" pin="P$2"/> @@ -5332,10 +5154,10 @@ </net> <net name="N$16" class="0"> <segment> -<wire x1="101.6" y1="129.54" x2="25.4" y2="129.54" width="0.1524" layer="91"/> -<wire x1="25.4" y1="129.54" x2="25.4" y2="124.46" width="0.1524" layer="91"/> -<wire x1="25.4" y1="129.54" x2="22.86" y2="129.54" width="0.1524" layer="91"/> -<junction x="25.4" y="129.54"/> +<wire x1="101.6" y1="129.54" x2="22.86" y2="129.54" width="0.1524" layer="91"/> +<wire x1="22.86" y1="129.54" x2="22.86" y2="124.46" width="0.1524" layer="91"/> +<wire x1="22.86" y1="129.54" x2="20.32" y2="129.54" width="0.1524" layer="91"/> +<junction x="22.86" y="129.54"/> <pinref part="IC3" gate="G$1" pin="XTALOUT"/> <pinref part="Q1" gate="G$1" pin="2"/> <pinref part="C13" gate="G$1" pin="P$2"/> @@ -5393,15 +5215,20 @@ <pinref part="U$6" gate="G$1" pin="+3,3V"/> </segment> <segment> +<wire x1="53.34" y1="101.6" x2="53.34" y2="96.52" width="0.1524" layer="91"/> +<pinref part="R9" gate="G$1" pin="P$1"/> +<pinref part="U$8" gate="G$1" pin="+3,3V"/> +</segment> +<segment> <wire x1="86.36" y1="165.1" x2="73.66" y2="165.1" width="0.1524" layer="91"/> <wire x1="73.66" y1="165.1" x2="63.5" y2="165.1" width="0.1524" layer="91"/> -<wire x1="63.5" y1="165.1" x2="30.48" y2="165.1" width="0.1524" layer="91"/> -<wire x1="30.48" y1="165.1" x2="15.24" y2="165.1" width="0.1524" layer="91"/> -<wire x1="15.24" y1="165.1" x2="10.16" y2="165.1" width="0.1524" layer="91"/> -<wire x1="10.16" y1="165.1" x2="10.16" y2="167.64" width="0.1524" layer="91"/> +<wire x1="63.5" y1="165.1" x2="48.26" y2="165.1" width="0.1524" layer="91"/> +<wire x1="48.26" y1="165.1" x2="33.02" y2="165.1" width="0.1524" layer="91"/> +<wire x1="33.02" y1="165.1" x2="27.94" y2="165.1" width="0.1524" layer="91"/> +<wire x1="27.94" y1="165.1" x2="27.94" y2="167.64" width="0.1524" layer="91"/> <wire x1="86.36" y1="162.56" x2="86.36" y2="165.1" width="0.1524" layer="91"/> -<wire x1="15.24" y1="160.02" x2="15.24" y2="165.1" width="0.1524" layer="91"/> -<wire x1="30.48" y1="160.02" x2="30.48" y2="165.1" width="0.1524" layer="91"/> +<wire x1="33.02" y1="160.02" x2="33.02" y2="165.1" width="0.1524" layer="91"/> +<wire x1="48.26" y1="160.02" x2="48.26" y2="165.1" width="0.1524" layer="91"/> <wire x1="63.5" y1="160.02" x2="63.5" y2="165.1" width="0.1524" layer="91"/> <wire x1="73.66" y1="160.02" x2="73.66" y2="165.1" width="0.1524" layer="91"/> <wire x1="86.36" y1="162.56" x2="86.36" y2="160.02" width="0.1524" layer="91"/> @@ -5411,8 +5238,8 @@ <wire x1="86.36" y1="162.56" x2="101.6" y2="162.56" width="0.1524" layer="91"/> <wire x1="101.6" y1="165.1" x2="86.36" y2="165.1" width="0.1524" layer="91"/> <junction x="86.36" y="165.1"/> -<junction x="15.24" y="165.1"/> -<junction x="30.48" y="165.1"/> +<junction x="33.02" y="165.1"/> +<junction x="48.26" y="165.1"/> <junction x="63.5" y="165.1"/> <junction x="73.66" y="165.1"/> <junction x="86.36" y="162.56"/> @@ -5428,81 +5255,69 @@ <pinref part="U$11" gate="G$1" pin="+3,3V"/> </segment> <segment> -<wire x1="81.28" y1="22.86" x2="81.28" y2="30.48" width="0.1524" layer="91"/> -<wire x1="68.58" y1="30.48" x2="73.66" y2="30.48" width="0.1524" layer="91"/> +<wire x1="96.52" y1="20.32" x2="96.52" y2="27.94" width="0.1524" layer="91"/> +<wire x1="83.82" y1="27.94" x2="88.9" y2="27.94" width="0.1524" layer="91"/> <pinref part="IC4" gate="G$1" pin="OUT"/> <pinref part="C17" gate="G$1" pin="1"/> <pinref part="C16" gate="G$1" pin="P$1"/> -<wire x1="73.66" y1="30.48" x2="81.28" y2="30.48" width="0.1524" layer="91"/> -<wire x1="73.66" y1="22.86" x2="73.66" y2="30.48" width="0.1524" layer="91"/> -<junction x="73.66" y="30.48"/> -<junction x="81.28" y="30.48"/> +<wire x1="88.9" y1="27.94" x2="96.52" y2="27.94" width="0.1524" layer="91"/> +<wire x1="88.9" y1="20.32" x2="88.9" y2="27.94" width="0.1524" layer="91"/> +<junction x="88.9" y="27.94"/> +<junction x="96.52" y="27.94"/> <pinref part="U$13" gate="G$1" pin="+3,3V"/> -<wire x1="81.28" y1="30.48" x2="81.28" y2="35.56" width="0.1524" layer="91"/> +<wire x1="96.52" y1="27.94" x2="96.52" y2="33.02" width="0.1524" layer="91"/> </segment> <segment> <pinref part="IC4" gate="G$1" pin="K"/> <pinref part="U$12" gate="G$1" pin="+3,3V"/> </segment> <segment> -<pinref part="R1" gate="G$1" pin="P$1"/> -<pinref part="U$2" gate="G$1" pin="+3,3V"/> -<wire x1="71.12" y1="93.98" x2="71.12" y2="83.82" width="0.1524" layer="91"/> -<wire x1="71.12" y1="83.82" x2="60.96" y2="83.82" width="0.1524" layer="91"/> -<wire x1="60.96" y1="83.82" x2="60.96" y2="76.2" width="0.1524" layer="91"/> -<wire x1="60.96" y1="93.98" x2="60.96" y2="83.82" width="0.1524" layer="91"/> -<pinref part="R9" gate="G$1" pin="P$1"/> -<junction x="60.96" y="83.82"/> +<pinref part="R1" gate="G$1" pin="P$2"/> +<pinref part="U$1" gate="G$1" pin="+3,3V"/> +<wire x1="22.86" y1="93.98" x2="22.86" y2="91.44" width="0.1524" layer="91"/> </segment> <segment> -<pinref part="R2" gate="G$1" pin="P$2"/> -<pinref part="U$3" gate="G$1" pin="+3,3V"/> -<wire x1="22.86" y1="99.06" x2="22.86" y2="93.98" width="0.1524" layer="91"/> +<pinref part="R2" gate="G$1" pin="P$1"/> +<pinref part="U$2" gate="G$1" pin="+3,3V"/> +<wire x1="60.96" y1="101.6" x2="60.96" y2="91.44" width="0.1524" layer="91"/> </segment> </net> <net name="TGT_NRESET" class="0"> <segment> <pinref part="IC3" gate="G$1" pin="PIO0.0/NRESET"/> -<wire x1="101.6" y1="124.46" x2="66.04" y2="124.46" width="0.1524" layer="91"/> -<label x="58.42" y="124.46" size="1.778" layer="95"/> -</segment> -<segment> -<pinref part="CON1" gate="G$1" pin="P$10"/> -<wire x1="154.94" y1="17.78" x2="160.02" y2="17.78" width="0.1524" layer="91"/> -<label x="162.56" y="17.78" size="1.778" layer="95"/> +<wire x1="101.6" y1="124.46" x2="35.56" y2="124.46" width="0.1524" layer="91"/> +<wire x1="35.56" y1="124.46" x2="35.56" y2="78.74" width="0.1524" layer="91"/> +<wire x1="35.56" y1="78.74" x2="22.86" y2="78.74" width="0.1524" layer="91"/> +<label x="43.18" y="124.46" size="1.778" layer="95"/> +<pinref part="SW1" gate="G$1" pin="S"/> +<pinref part="R1" gate="G$1" pin="P$1"/> +<wire x1="22.86" y1="76.2" x2="22.86" y2="78.74" width="0.1524" layer="91"/> +<junction x="22.86" y="78.74"/> +<wire x1="22.86" y1="78.74" x2="22.86" y2="81.28" width="0.1524" layer="91"/> +<pinref part="C1" gate="G$1" pin="P$2"/> +<wire x1="35.56" y1="78.74" x2="35.56" y2="73.66" width="0.1524" layer="91"/> +<junction x="35.56" y="78.74"/> </segment> </net> <net name="VBUS_TGT" class="0"> <segment> -<wire x1="48.26" y1="30.48" x2="15.24" y2="30.48" width="0.1524" layer="91"/> -<label x="12.7" y="27.94" size="1.778" layer="95"/> +<wire x1="63.5" y1="27.94" x2="53.34" y2="27.94" width="0.1524" layer="91"/> +<label x="40.64" y="27.94" size="1.778" layer="95"/> <pinref part="IC4" gate="G$1" pin="IN"/> </segment> <segment> -<wire x1="241.3" y1="63.5" x2="254" y2="63.5" width="0.1524" layer="91"/> -<label x="236.22" y="45.72" size="1.778" layer="95"/> <pinref part="CON2" gate="A" pin="VBUS"/> -<wire x1="241.3" y1="63.5" x2="241.3" y2="50.8" width="0.1524" layer="91"/> -</segment> -</net> -<net name="N$3" class="0"> -<segment> -<pinref part="IC3" gate="G$1" pin="PIO0.3/USB_VBUS"/> -<pinref part="R1" gate="G$1" pin="P$2"/> -<wire x1="71.12" y1="104.14" x2="71.12" y2="116.84" width="0.1524" layer="91"/> -<wire x1="71.12" y1="116.84" x2="101.6" y2="116.84" width="0.1524" layer="91"/> +<wire x1="254" y1="63.5" x2="243.84" y2="63.5" width="0.1524" layer="91"/> +<wire x1="243.84" y1="63.5" x2="243.84" y2="48.26" width="0.1524" layer="91"/> +<label x="238.76" y="43.18" size="1.778" layer="95"/> </segment> </net> <net name="N$2" class="0"> <segment> -<pinref part="C1" gate="G$1" pin="P$2"/> -<pinref part="R2" gate="G$1" pin="P$1"/> -<wire x1="22.86" y1="83.82" x2="22.86" y2="81.28" width="0.1524" layer="91"/> -<pinref part="SW2" gate="G$1" pin="S"/> -<wire x1="22.86" y1="81.28" x2="22.86" y2="76.2" width="0.1524" layer="91"/> -<wire x1="15.24" y1="78.74" x2="15.24" y2="81.28" width="0.1524" layer="91"/> -<wire x1="15.24" y1="81.28" x2="22.86" y2="81.28" width="0.1524" layer="91"/> -<junction x="22.86" y="81.28"/> +<pinref part="IC3" gate="G$1" pin="PIO0.3/USB_VBUS"/> +<pinref part="R2" gate="G$1" pin="P$2"/> +<wire x1="101.6" y1="116.84" x2="60.96" y2="116.84" width="0.1524" layer="91"/> +<wire x1="60.96" y1="116.84" x2="60.96" y2="111.76" width="0.1524" layer="91"/> </segment> </net> </nets>