The HDK is used for creating mbed enabled hardware. Give your hardware project the power of mbed!

Fork of mbed-HDK by mbed official

HDK

CMSIS-DAP

HDK and CMSIS-DAP

Revision:
10:bc96cec5b238
Parent:
8:bda7e2194577
diff -r 82096107cf06 -r bc96cec5b238 mbed-HDK.lbr
--- a/mbed-HDK.lbr	Fri Oct 25 15:26:05 2013 +0100
+++ b/mbed-HDK.lbr	Tue Nov 12 17:14:33 2013 +0000
@@ -1,12 +1,12 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!DOCTYPE eagle SYSTEM "eagle.dtd">
-<eagle version="6.5.0">
+<eagle version="6.2">
 <drawing>
 <settings>
 <setting alwaysvectorfont="no"/>
 <setting verticaltext="up"/>
 </settings>
-<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="yes" altdistance="0.01" altunitdist="inch" altunit="inch"/>
 <layers>
 <layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
 <layer number="2" name="Route2" color="1" fill="3" visible="no" active="yes"/>
@@ -13953,12 +13953,12 @@
 <symbol name="+3.3V_IF">
 <circle x="0" y="3.302" radius="0.762" width="0.4064" layer="94"/>
 <text x="-3.556" y="4.826" size="1.778" layer="96">&gt;VALUE</text>
-<pin name="+3,3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
+<pin name="+3.3V_IF" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 <symbol name="+3.3V_TGT">
 <circle x="0" y="3.302" radius="0.762" width="0.4064" layer="94"/>
 <text x="-3.556" y="4.826" size="1.778" layer="96">&gt;VALUE</text>
-<pin name="+3,3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
+<pin name="+3.3V_TGT" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
 <symbol name="GND">
 <rectangle x1="-1.27" y1="-2.794" x2="1.27" y2="-2.032" layer="94"/>