mbed-os-examples / Mbed OS mbed-os-example-ble-HeartRate

This application transmits a heart rate value using the Bluetooth SIG Heart Rate Profile. The heart rate value is provided by the application itself, not by a sensor, so that you don't have to get a sensor just to run the example. The canonical source for this example lives at https://github.com/ARMmbed/mbed-os-example-ble/tree/master/BLE_HeartRate

BLE Heart Rate Monitor

This application transmits a heart rate value using the Bluetooth SIG Heart Rate Profile. The heart rate value is provided by the application itself, not by a sensor, so that you don't have to get a sensor just to run the example.

Technical details are better presented in the mbed Classic equivalent of this example.

Running the application

Requirements

To see the heart rate information on your phone, download Panobike for iOS or Android.

You could also use a generic BLE scanners:

- nRF Master Control Panel for Android.

- LightBlue for iPhone.

Hardware requirements are in the main readme.

Building instructions

Building with mbed-cli

If you'd like to use mbed-cli to build this, then you should refer to the main readme. The instructions here relate to using the developer.mbed.org Online Compiler

In order to build this example in the mbed Online Compiler, first import the example using the ‘Import’ button on the right hand side.

Next, select a platform to build for. This must either be a platform that supports BLE, for example the NRF51-DK, or one of the following:

List of platforms supporting Bluetooth Low Energy

Or you must also add a piece of hardware and the supporting library that includes a Bluetooth Low Energy driver for that hardware, for example the K64F or NUCLEO_F401RE with the X-NUCLEO-IDB05A1

List of components supporting Bluetooth Low Energy.

Once you have selected your platform, compile the example and drag and drop the resulting binary onto your board.

For general instructions on using the mbed Online Compiler, please see the mbed Handbook

Checking for success

Note: Screens captures depicted below show what is expected from this example if the scanner used is nRF Master Control Panel version 4.0.5. If you encounter any difficulties consider trying another scanner or another version of nRF Master Control Panel. Alternative scanners may require reference to their manuals.

  • Build the application and install it on your board as explained in the building instructions.
  • Open the BLE scanner on your phone.
  • Start a scan.

/media/uploads/vcoubard/start_scan.png

figure 1 How to start scan using nRF Master Control Panel 4.0.5

  • Find your device; it should be named `HRM`.

/media/uploads/vcoubard/scan_result.png

figure 2 Scan results using nRF Master Control Panel 4.0.5

  • Establish a connection with your device.

/media/uploads/vcoubard/connection.png

figure 3 How to establish a connection using Master Control Panel 4.0.5

  • Discover the services and the characteristics on the device. The *Heart Rate* service has the UUID `0x180D` and includes the *Heart Rate Measurement* characteristic which has the UUID `0x2A37`.

/media/uploads/vcoubard/discovery.png

figure 4 Representation of the Heart Rate service using Master Control Panel 4.0.5

  • Register for the notifications sent by the Heart Rate Measurement characteristic.

/media/uploads/vcoubard/register_to_notifications.png

figure 5 How to register to notifications using Master Control Panel 4.0.5

  • You should see the heart rate value change every half second. It begins at 100, goes up to 175 (in steps of 1), resets to 100 and so on.

/media/uploads/vcoubard/notifications.png

figure 6 Notifications view using Master Control Panel 4.0.5

source/main.cpp@43:fb2855f7754b, 2017-11-01 (annotated)

Committer:
mbed_official
Date:
Wed Nov 01 15:30:57 2017 +0000
Revision:
43:fb2855f7754b
Parent:
26:d7dd71a8aea1
Child:
73:633b44bce5fc
Merge pull request #112 from marcbonnici/master



Add MAC address printouts to examples

.

Commit copied from https://github.com/ARMmbed/mbed-os-example-ble

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 1:72c60abef7e7 1 /* mbed Microcontroller Library
mbed_official 1:72c60abef7e7 2 * Copyright (c) 2006-2015 ARM Limited
mbed_official 1:72c60abef7e7 3 *
mbed_official 1:72c60abef7e7 4 * Licensed under the Apache License, Version 2.0 (the "License");
mbed_official 1:72c60abef7e7 5 * you may not use this file except in compliance with the License.
mbed_official 1:72c60abef7e7 6 * You may obtain a copy of the License at
mbed_official 1:72c60abef7e7 7 *
mbed_official 1:72c60abef7e7 8 * http://www.apache.org/licenses/LICENSE-2.0
mbed_official 1:72c60abef7e7 9 *
mbed_official 1:72c60abef7e7 10 * Unless required by applicable law or agreed to in writing, software
mbed_official 1:72c60abef7e7 11 * distributed under the License is distributed on an "AS IS" BASIS,
mbed_official 1:72c60abef7e7 12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
mbed_official 1:72c60abef7e7 13 * See the License for the specific language governing permissions and
mbed_official 1:72c60abef7e7 14 * limitations under the License.
mbed_official 1:72c60abef7e7 15 */
mbed_official 1:72c60abef7e7 16
mbed_official 10:ac3615194d04 17 #include <events/mbed_events.h>
mbed_official 1:72c60abef7e7 18 #include <mbed.h>
mbed_official 1:72c60abef7e7 19 #include "ble/BLE.h"
mbed_official 1:72c60abef7e7 20 #include "ble/Gap.h"
mbed_official 1:72c60abef7e7 21 #include "ble/services/HeartRateService.h"
mbed_official 1:72c60abef7e7 22
mbed_official 1:72c60abef7e7 23 DigitalOut led1(LED1, 1);
mbed_official 1:72c60abef7e7 24
mbed_official 1:72c60abef7e7 25 const static char DEVICE_NAME[] = "HRM";
mbed_official 1:72c60abef7e7 26 static const uint16_t uuid16_list[] = {GattService::UUID_HEART_RATE_SERVICE};
mbed_official 1:72c60abef7e7 27
mbed_official 1:72c60abef7e7 28 static uint8_t hrmCounter = 100; // init HRM to 100bps
mbed_official 1:72c60abef7e7 29 static HeartRateService *hrServicePtr;
mbed_official 1:72c60abef7e7 30
mbed_official 26:d7dd71a8aea1 31 static EventQueue eventQueue(/* event count */ 16 * EVENTS_EVENT_SIZE);
mbed_official 1:72c60abef7e7 32
mbed_official 1:72c60abef7e7 33 void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params)
mbed_official 1:72c60abef7e7 34 {
mbed_official 1:72c60abef7e7 35 BLE::Instance().gap().startAdvertising(); // restart advertising
mbed_official 1:72c60abef7e7 36 }
mbed_official 1:72c60abef7e7 37
mbed_official 1:72c60abef7e7 38 void updateSensorValue() {
mbed_official 1:72c60abef7e7 39 // Do blocking calls or whatever is necessary for sensor polling.
mbed_official 1:72c60abef7e7 40 // In our case, we simply update the HRM measurement.
mbed_official 1:72c60abef7e7 41 hrmCounter++;
mbed_official 1:72c60abef7e7 42
mbed_official 1:72c60abef7e7 43 // 100 <= HRM bps <=175
mbed_official 1:72c60abef7e7 44 if (hrmCounter == 175) {
mbed_official 1:72c60abef7e7 45 hrmCounter = 100;
mbed_official 1:72c60abef7e7 46 }
mbed_official 1:72c60abef7e7 47
mbed_official 1:72c60abef7e7 48 hrServicePtr->updateHeartRate(hrmCounter);
mbed_official 1:72c60abef7e7 49 }
mbed_official 1:72c60abef7e7 50
mbed_official 1:72c60abef7e7 51 void periodicCallback(void)
mbed_official 1:72c60abef7e7 52 {
mbed_official 1:72c60abef7e7 53 led1 = !led1; /* Do blinky on LED1 while we're waiting for BLE events */
mbed_official 1:72c60abef7e7 54
mbed_official 1:72c60abef7e7 55 if (BLE::Instance().getGapState().connected) {
mbed_official 10:ac3615194d04 56 eventQueue.call(updateSensorValue);
mbed_official 1:72c60abef7e7 57 }
mbed_official 1:72c60abef7e7 58 }
mbed_official 1:72c60abef7e7 59
mbed_official 1:72c60abef7e7 60 void onBleInitError(BLE &ble, ble_error_t error)
mbed_official 1:72c60abef7e7 61 {
mbed_official 1:72c60abef7e7 62 (void)ble;
mbed_official 1:72c60abef7e7 63 (void)error;
mbed_official 1:72c60abef7e7 64 /* Initialization error handling should go here */
mbed_official 1:72c60abef7e7 65 }
mbed_official 1:72c60abef7e7 66
mbed_official 43:fb2855f7754b 67 void printMacAddress()
mbed_official 43:fb2855f7754b 68 {
mbed_official 43:fb2855f7754b 69 /* Print out device MAC address to the console*/
mbed_official 43:fb2855f7754b 70 Gap::AddressType_t addr_type;
mbed_official 43:fb2855f7754b 71 Gap::Address_t address;
mbed_official 43:fb2855f7754b 72 BLE::Instance().gap().getAddress(&addr_type, address);
mbed_official 43:fb2855f7754b 73 printf("DEVICE MAC ADDRESS: ");
mbed_official 43:fb2855f7754b 74 for (int i = 5; i >= 1; i--){
mbed_official 43:fb2855f7754b 75 printf("%02x:", address[i]);
mbed_official 43:fb2855f7754b 76 }
mbed_official 43:fb2855f7754b 77 printf("%02x\r\n", address[0]);
mbed_official 43:fb2855f7754b 78 }
mbed_official 43:fb2855f7754b 79
mbed_official 1:72c60abef7e7 80 void bleInitComplete(BLE::InitializationCompleteCallbackContext *params)
mbed_official 1:72c60abef7e7 81 {
mbed_official 1:72c60abef7e7 82 BLE& ble = params->ble;
mbed_official 1:72c60abef7e7 83 ble_error_t error = params->error;
mbed_official 1:72c60abef7e7 84
mbed_official 1:72c60abef7e7 85 if (error != BLE_ERROR_NONE) {
mbed_official 1:72c60abef7e7 86 onBleInitError(ble, error);
mbed_official 1:72c60abef7e7 87 return;
mbed_official 1:72c60abef7e7 88 }
mbed_official 1:72c60abef7e7 89
mbed_official 1:72c60abef7e7 90 if (ble.getInstanceID() != BLE::DEFAULT_INSTANCE) {
mbed_official 1:72c60abef7e7 91 return;
mbed_official 1:72c60abef7e7 92 }
mbed_official 1:72c60abef7e7 93
mbed_official 1:72c60abef7e7 94 ble.gap().onDisconnection(disconnectionCallback);
mbed_official 1:72c60abef7e7 95
mbed_official 1:72c60abef7e7 96 /* Setup primary service. */
mbed_official 1:72c60abef7e7 97 hrServicePtr = new HeartRateService(ble, hrmCounter, HeartRateService::LOCATION_FINGER);
mbed_official 1:72c60abef7e7 98
mbed_official 1:72c60abef7e7 99 /* Setup advertising. */
mbed_official 1:72c60abef7e7 100 ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED | GapAdvertisingData::LE_GENERAL_DISCOVERABLE);
mbed_official 1:72c60abef7e7 101 ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_16BIT_SERVICE_IDS, (uint8_t *)uuid16_list, sizeof(uuid16_list));
mbed_official 1:72c60abef7e7 102 ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::GENERIC_HEART_RATE_SENSOR);
mbed_official 1:72c60abef7e7 103 ble.gap().accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LOCAL_NAME, (uint8_t *)DEVICE_NAME, sizeof(DEVICE_NAME));
mbed_official 1:72c60abef7e7 104 ble.gap().setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
mbed_official 1:72c60abef7e7 105 ble.gap().setAdvertisingInterval(1000); /* 1000ms */
mbed_official 1:72c60abef7e7 106 ble.gap().startAdvertising();
mbed_official 43:fb2855f7754b 107
mbed_official 43:fb2855f7754b 108 printMacAddress();
mbed_official 1:72c60abef7e7 109 }
mbed_official 1:72c60abef7e7 110
mbed_official 1:72c60abef7e7 111 void scheduleBleEventsProcessing(BLE::OnEventsToProcessCallbackContext* context) {
mbed_official 1:72c60abef7e7 112 BLE &ble = BLE::Instance();
mbed_official 10:ac3615194d04 113 eventQueue.call(Callback<void()>(&ble, &BLE::processEvents));
mbed_official 1:72c60abef7e7 114 }
mbed_official 1:72c60abef7e7 115
mbed_official 1:72c60abef7e7 116 int main()
mbed_official 1:72c60abef7e7 117 {
mbed_official 10:ac3615194d04 118 eventQueue.call_every(500, periodicCallback);
mbed_official 1:72c60abef7e7 119
mbed_official 1:72c60abef7e7 120 BLE &ble = BLE::Instance();
mbed_official 1:72c60abef7e7 121 ble.onEventsToProcess(scheduleBleEventsProcessing);
mbed_official 1:72c60abef7e7 122 ble.init(bleInitComplete);
mbed_official 1:72c60abef7e7 123
mbed_official 10:ac3615194d04 124 eventQueue.dispatch_forever();
mbed_official 1:72c60abef7e7 125
mbed_official 1:72c60abef7e7 126 return 0;
mbed_official 1:72c60abef7e7 127 }