Diff: EEPROM.h

Revision:

351:a89a46894ec0

Child:

352:022c513aee03

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/EEPROM.h	Sun Jan 22 04:47:11 2017 +0000
@@ -0,0 +1,69 @@
+#ifndef EEPROM_H
+#define EEPROM_H
+
+#define ee_scl PIN86
+#define ee_sda PIN87
+#define check 10
+
+EEPROM e2prom(ee_sda, ee_scl, 0, EEPROM::T24C512);
+int32_t INITIAL_EEPROM[32] = {1,1,1,1,1,0,0,0,0,35001,0xff,300,85,20,20,3,80000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0};
+uint32_t flasharray_thres[32];
+
+void WRITE_TO_EEPROM(uint32_t address, int32_t data_block)
+{
+    e2prom.write(address*4+10,data_block);
+}
+
+void THRES_WRITE_TO_EEPROM(uint16_t mid, uint32_t* thres_data)
+{
+    int8_t data[128];
+    memcpy(data,&thres_data,128);
+    
+    if(mid <11 & mid >1)
+    {
+        e2prom.write((uint32_t)(mid-1)*128,data,128);
+    }    
+}
+
+uint32_t READ_FROM_EERPOM(uint32_t address)
+{
+    int32_t data;
+    e2prom.read(address*4+10, data);
+    return (uint32_t)data;
+}
+
+void INIT_EEPROM()
+{
+    int32_t test_buffer;
+    e2prom.ready();
+    e2prom.read(2,test_buffer);
+    if(test_buffer == 0)
+    {
+        for(int i=0;i<32;i++)
+            WRITE_TO_EEPROM( i, INITIAL_EEPROM[i]);
+        
+        e2prom.write(2,1);
+        gPC.printf("starting flash");
+    }
+    
+    gPC.printf("Reading intial parametrs from flash\n");
+    EPS_V_A_EN_STATUS         = READ_FROM_EERPOM(0);
+    BAE_STATUS                = READ_FROM_EERPOM(1);
+    SD_STATUS                 = READ_FROM_EERPOM(2);
+    PL_STATUS                 = READ_FROM_EERPOM(3);
+    PL_EPS_LATCH_SW_EN        = READ_FROM_EERPOM(4);
+    RTC_INIT_STATUS           = READ_FROM_EERPOM(5);
+    CDMS_RTC_DISABLE          = READ_FROM_EERPOM(6);
+    CDMS_RESET_COUNTER        = READ_FROM_EERPOM(7);
+    TIME_LATEST_CDSMS_RESET   = READ_FROM_EERPOM(8);
+    COM_TC_BYTES_LIMIT        = READ_FROM_EERPOM(9);
+    COM_RX_CURRENT_MAX        = READ_FROM_EERPOM(10);
+    COM_RX_DISABLE_TIMEOUT    = READ_FROM_EERPOM(11);
+    COM_PA_TMP_HIGH           = READ_FROM_EERPOM(12);
+    COM_PA_RECOVERY_TIMEOUT   = READ_FROM_EERPOM(13);
+    COM_SESSION_TIMEOUT       = READ_FROM_EERPOM(14);
+    COM_RSSI_MIN              = READ_FROM_EERPOM(15);
+    SD_LIB_BLK_CURRENT        = READ_FROM_EERPOM(16);
+}
+
+#endif
\ No newline at end of file