![](/media/cache/group/nine_tails_kurama_by_zubair43-d4zyf5s.jpg.50x50_q85.jpg)
FINAL ACS TO BE USED FOR TESTING. COMMISSIONING, ACS MAIN, DATA ACQ ALL DONE.
Dependencies: FreescaleIAP mbed-rtos mbed
Fork of ACS_FULL_Flowchart_BAE by
TCTM.cpp
- Committer:
- Bragadeesh153
- Date:
- 2016-06-28
- Revision:
- 19:403cb36e22ed
- Parent:
- 18:21740620c65e
File content as of revision 19:403cb36e22ed:
#include "mbed.h" #include "TCTM.h" #include "crc.h" #include "ACS.h" #include "EPS.h" #include "pin_config.h" #include "FreescaleIAP.h" #include "inttypes.h" #include "iostream" #include "stdint.h" #include "cassert" #include"math.h" /*define the pins for digital out*/ extern DigitalOut ATS1_SW_ENABLE; // enable of att sens2 switch extern DigitalOut ATS2_SW_ENABLE; // enable of att sens switch extern DigitalOut DRV_Z_EN; extern DigitalOut DRV_XY_EN; extern uint8_t ACS_STATUS; extern uint8_t ACS_ATS_STATUS; extern float b_old[3]; // Unit: Tesla extern float db[3]; extern uint8_t flag_firsttime; extern uint8_t ACS_DETUMBLING_ALGO_TYPE; extern DigitalOut TRXY_SW; //TR XY Switch if any TR_SW error arises then it is same as TR_SW_EN extern DigitalOut TRZ_SW; //TR Z Switch extern DigitalOut CDMS_RESET; // CDMS RESET extern DigitalOut BCN_SW; //Beacon switch extern uint8_t BCN_TX_STATUS; extern uint8_t BCN_FEN; extern BAE_HK_actual actual_data; extern BAE_HK_min_max bae_HK_minmax; extern uint32_t BAE_STATUS; extern float data[6]; extern float moment[3]; extern uint8_t ACS_STATE; extern DigitalOut EN_BTRY_HT; extern DigitalOut phase_TR_x; extern DigitalOut phase_TR_y; extern DigitalOut phase_TR_z; extern BAE_HK_quant quant_data; //extern DigitalOut TRXY_SW; //extern DigitalOut TRZ_SW_EN; //same as TRZ_SW extern uint32_t BAE_ENABLE; //extern DigitalOut ACS_ACQ_DATA_ENABLE; /*given a default value as of now shuld read value from flash and increment it write it back very time it starts(bae)*/ extern uint8_t BAE_RESET_COUNTER=0; //extern uint8_t BCN_FAIL_COUNT; extern PwmOut PWM1; //x //Functions used to generate PWM signal extern PwmOut PWM2; //y extern PwmOut PWM3; //z //PWM output comes from pins p6 extern void F_ACS(); extern void F_BCN(); //extern void FCTN_ACS_GENPWM_MAIN(); extern void F_EPS(); extern void FCTN_ACS_GENPWM_MAIN(float Moment[3]); extern int FCTN_ACS_INIT(); extern int SENSOR_DATA_ACQ(); extern int SENSOR_INIT(); extern int FCTN_ATS_DATA_ACQ(); uint8_t telemetry[135]; extern AnalogIn CurrentInput; // Input from Current Multiplexer //PIN54 extern DigitalOut SelectLineb3; // MSB of Select Lines extern DigitalOut SelectLineb2; extern DigitalOut SelectLineb1; extern DigitalOut SelectLineb0; // LSB of Select Lines void FCTN_CONVERT_UINT (uint8_t input[2], float* output) { *output = (float) input[1]; *output = *output/100.0; //input[0] integer part *output = *output + (float) input[0]; //input[1] decimal part correct to two decimal places } float angle(float x,float y,float z) { float mag_total=sqrt(x*x + y*y + z*z); float cos_z = z/mag_total; float theta_z = acosf(cos_z); return theta_z; //printf("/n cos_zz= %f /t theta_z= %f /n",cos_z,theta_z); } //uint8_t tm1[134]; void FCTN_BAE_TM_TC (uint8_t* tc) { // tm1[0] = 1; uint8_t service_type=(tc[2]&0xF0); /*chaged*/ uint8_t* tm; // without it some identifier error uint16_t crc16; switch(service_type) { case 0x60: { printf("Memory Management Service\r\n"); uint8_t service_subtype=(tc[2]&0x0F); switch(service_subtype) { case 0x01: { printf("Read from Flash\r\n"); uint16_t jj; uint16_t MID = ((uint16_t)tc[3] << 8) | tc[4]; switch(MID) {case 0x1100:jj=0x00;// using uint16_t as jj typesimilarly used in FCTN_CDMS_WR_FLASH break; case 0x0100:jj=0x01; break; case 0x0101:jj=0x02; break; case 0x0102:jj=0x03; break; case 0x0107:jj=0x04; break; case 0x0103:jj=0x05; break; case 0x0104:jj=0x05; break; case 0x0105:jj=0x06; break; case 0x0106:jj=0x07; break; } /*pointer....!!!!*/ uint32_t FLASH_TEMP = FCTN_CDMS_RD_FLASH(jj); tm[0] = 0x60; tm[1] = tc[0]; tm[2] = ACK_CODE; for(int i=0; i<8*4; i+=4) { tm[4+i] =(uint8_t )(((FLASH_TEMP)>>24)&0xFF); tm[5+i] =(uint8_t ) (((FLASH_TEMP)>>16)&0xFF); tm[6+i] =(uint8_t ) (((FLASH_TEMP)>>8)&0xFF); tm[7+i] =(uint8_t ) ((FLASH_TEMP) & 0xFF); } for (int i=4+8*4; i<132;i++) { tm[i] = 0x00; } crc16 = CRC::crc16_gen(tm,132); tm[132] = (uint8_t)((crc16&0xFF00)>>8); tm[133] = (uint8_t)(crc16&0x00FF); break; } case 0x02: { printf("Read from RAM\r\n"); uint16_t MID = ((uint16_t)tc[3] << 8) | tc[4]; switch(MID) { case 0x0001: { printf("\nRead from MID 0001 hk\n"); /*taking some varible till we find some thing more useful*/ //uint8_t ref_val=0x01; telemetry[0] = 1; telemetry[1] = tc[0]; telemetry[2] = ACK_CODE; /*random or with bcn_tx_sw_enable assuming it is 1 bit in length how to get that we dont know, now we just assume it to be so*/ telemetry[3] = (BCN_SW); telemetry[3] = telemetry[3]|(TRXY_SW<<1); telemetry[3] = telemetry[3]|(TRZ_SW<<2); telemetry[3] = telemetry[3]|(ATS1_SW_ENABLE<<3); telemetry[3] = telemetry[3]|(ATS2_SW_ENABLE<<4); if(BCN_TX_STATUS==2) telemetry[3] = telemetry[3]|0x20; else telemetry[3] = telemetry[3] & 0xDF; telemetry[3] = telemetry[3]|(BCN_FEN<<6); uint8_t mask_val=BAE_ENABLE & 0x00000008; /*can be a problem see if any error occurs*/ telemetry[3] = telemetry[3]|(mask_val<<7); /*not included in the code yet*/ telemetry[4] = BAE_RESET_COUNTER; telemetry[5] = ACS_STATE; telemetry[5] = telemetry[5]|(EN_BTRY_HT<<3); telemetry[5] = telemetry[5]|(phase_TR_x<<4); telemetry[5] = telemetry[5]|(phase_TR_y<<5); telemetry[5] = telemetry[5]|(phase_TR_z<<6); /*spare to be fixed*/ //telemetry[5] = telemetry[5]|(Spare))<<7); /**/ uint8_t soc_powerlevel_2=50; uint8_t soc_powerlevel_3=65; telemetry[6] = soc_powerlevel_2; telemetry[7] = soc_powerlevel_3; /*to be fixed*/ telemetry[8] = 0; telemetry[9] = 0; telemetry[10] = 0; telemetry[11] = 0; //telemetry[8] = Torque Rod X Offset; //telemetry[9] = Torque Rod Y Offset; //telemetry[10] = Torque Rod Z Offset; //telemetry[11] = ACS_DEMAG_TIME_DELAY; telemetry[12] = (BAE_STATUS>>24) & 0xFF; telemetry[13] = (BAE_STATUS>>16) & 0xFF; telemetry[14] = (BAE_STATUS>>8) & 0xFF; telemetry[15] = BAE_STATUS & 0xFF; /*to be fixed*/ //telemetry[16] = BCN_FAIL_COUNT; telemetry[17] = actual_data.power_mode; /*to be fixed*/ uint16_t P_BAE_I2CRX_COUNTER=0; uint16_t P_ACS_MAIN_COUNTER=0; uint16_t P_BCN_TX_MAIN_COUNTER=0; uint16_t P_EPS_MAIN_COUNTER=0; telemetry[18] = P_BAE_I2CRX_COUNTER>>8; telemetry[19] = P_BAE_I2CRX_COUNTER; telemetry[20] = P_ACS_MAIN_COUNTER>>8; telemetry[21] = P_ACS_MAIN_COUNTER; telemetry[22] = P_BCN_TX_MAIN_COUNTER>>8; telemetry[23] = P_BCN_TX_MAIN_COUNTER; telemetry[24] = P_EPS_MAIN_COUNTER>>8; telemetry[25] = P_EPS_MAIN_COUNTER; //actual_data.AngularSpeed_actual[0]=5.32498; for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT((float)actual_data.Bvalue_actual[i],&telemetry[26+ (i*4)]); for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT((float)actual_data.AngularSpeed_actual[i],&telemetry[38+(i*4)]); //printf("\n\rthe value is 38\t %x\n",telemetry[38]); //printf("\n\rthe value is 39\t%x\n",telemetry[39]); //printf("\n\rthe value is 40\t%x\n",telemetry[40]); //printf("\n\rthe value is 41\t%x\n",telemetry[41]); //printf("\n\rthe value true\t%f\n",actual_data.AngularSpeed_actual[0]); //uint32_t input_stage1=0x00000000; //uint8_t output1[4]; //output1[0]=(uint32_t)(telemetry[38]); //output1[1]=(uint32_t)(telemetry[39]); //output1[2]=(uint32_t)(telemetry[40]); //output1[3]=(uint32_t)(telemetry[41]); //input_stage1=output[3]+(output[2]*(0x100))+(output[1]*(0x10000))+(output[0]*(0x1000000)); //input_stage1=(output1[0]<<24) | (output1[1]<<16) | (output1[2]<<8) | (output1[3]); //assert(sizeof(float) == sizeof(uint32_t)); //float* temp1 = reinterpret_cast<float*>(&input_stage1); //printf("\n\r the value is: %f \n",*temp1); //FAULT_FLAG(); telemetry[50] = actual_data.faultIr_status; telemetry[51] = actual_data.faultPoll_status; //Bdot Rotation Speed of Command telemetry[52-53] //Bdot Output Current telemetry[54] //float l_pmw1 = (PWM1); //float l_pmw2 = PWM2; //float l_pmw3 = PWM3; /*__________________________________________________________________*/ /*change and check if changing it to PWM1 causes problem*/ /*___________________________________________________________________*/ float PWM_measured[3]; PWM_measured[0] = PWM1.read(); PWM_measured[1] = PWM2.read(); PWM_measured[2] = PWM3.read(); FCTN_CONVERT_FLOAT(PWM_measured[0], &telemetry[55]); FCTN_CONVERT_FLOAT(PWM_measured[1], &telemetry[59]); FCTN_CONVERT_FLOAT(PWM_measured[2], &telemetry[63]); float attitude_ang = angle(actual_data.Bvalue_actual[0],actual_data.Bvalue_actual[1],actual_data.Bvalue_actual[2]); FCTN_CONVERT_FLOAT(attitude_ang, &telemetry[67]); for (int i=0; i<16; i++) telemetry[68+i] = quant_data.voltage_quant[i]; for (int i=0; i<12; i++) telemetry[84+i] = quant_data.current_quant[i]; //telemetry[96] //telemetry[97] //telemetry[98] //telemetry[99] telemetry[100] = quant_data.Batt_voltage_quant; telemetry[101] = quant_data.BAE_temp_quant; telemetry[102] = quant_data.Batt_gauge_quant[1]; telemetry[103] = quant_data.Batt_temp_quant[0]; telemetry[104] = quant_data.Batt_temp_quant[1]; //telemetry[105] = beacon temperature; for (int i=105; i<132;i++) { telemetry[i] = 0x00; } crc16 = CRC::crc16_gen(telemetry,132); telemetry[132] = (uint8_t)((crc16&0xFF00)>>8); telemetry[133] = (uint8_t)(crc16&0x00FF); break; } case 0x0002: { printf("\r\n"); telemetry[0] = 0x60; telemetry[1] = tc[0]; telemetry[2] = ACK_CODE; for(int i;i<16;i++) telemetry[i+3] = bae_HK_minmax.voltage_max[i]; for(int i;i<12;i++) telemetry[i+18] = bae_HK_minmax.current_max[i]; telemetry[29] = bae_HK_minmax.Batt_voltage_max;; telemetry[30] = bae_HK_minmax.BAE_temp_max; /*battery soc*/ //telemetry[31] = BAE_HK_min_max bae_HK_minmax.voltage_max; telemetry[32] = bae_HK_minmax.Batt_temp_max[0]; telemetry[33] = bae_HK_minmax.Batt_temp_max[1]; /*BCN temp not there*/ //telemetry[34] = BAE_HK_min_max bae_HK_minmax.; for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(bae_HK_minmax.Bvalue_max[i],&telemetry[35+(i*4)]); for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(bae_HK_minmax.AngularSpeed_max[i],&telemetry[47+(i*4)]); /*min data*/ for(int i;i<16;i++) telemetry[i+59] = bae_HK_minmax.voltage_min[i]; for(int i;i<12;i++) telemetry[i+74] = bae_HK_minmax.current_min[i]; telemetry[86] = bae_HK_minmax.Batt_voltage_min; telemetry[87] = bae_HK_minmax.BAE_temp_min; /*battery soc*/ //telemetry[88] = BAE_HK_min_max bae_HK_minmax.voltage_max; telemetry[89] = bae_HK_minmax.Batt_temp_min[0]; telemetry[90] = bae_HK_minmax.Batt_temp_min[1]; //huhu// /*BCN temp not there*/ //telemetry[91] = BAE_HK_min_max bae_HK_minmax.; for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(bae_HK_minmax.Bvalue_min[i],&telemetry[91+(i*4)]); for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(bae_HK_minmax.AngularSpeed_min[i],&telemetry[103+(i*4)]); for (int i=115; i<132;i++) { telemetry[i] = 0x00; } crc16 = CRC::crc16_gen(telemetry,132); telemetry[132] = (uint8_t)((crc16&0xFF00)>>8); telemetry[133] = (uint8_t)(crc16&0x00FF); break; } } break; } case 0x05: { printf("\nRead from MID 0001 min max\n"); /*changed*/ printf("\n\rwrite on flash\n"); uint32_t FLASH_DATA[8]; uint16_t MID = ((uint16_t)tc[3] << 8) | tc[4]; switch(MID ) { case 0x0100: { FLASH_DATA[0] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x00,FLASH_DATA[0]); break; } case 0x0101: { FLASH_DATA[1] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x01,FLASH_DATA[1]); break; } case 0x0102: { FLASH_DATA[2] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x02,FLASH_DATA[2]); break; } case 0x0103: { FLASH_DATA[3] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x03,FLASH_DATA[3]); break; } case 0x0104: { FLASH_DATA[4] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x04,FLASH_DATA[4]); break; } case 0x0105: { FLASH_DATA[5] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x05,FLASH_DATA[5]); break; } case 0x0106: { FLASH_DATA[6] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x06,FLASH_DATA[6]); break; } case 0x0107: { FLASH_DATA[7] = (((uint32_t)tc[5] << 24) | ((uint32_t)tc[6] << 16) | ((uint32_t)tc[7] << 8) | (uint32_t)tc[6]); FCTN_CDMS_WR_FLASH(0x07,FLASH_DATA[7]); break; } default: { printf("Invalid MMS\r\n"); } } for (int i=4; i<132;i++) { tm[i] = 0x00; } crc16 = CRC::crc16_gen(tm,132); tm[132] = (uint8_t)((crc16&0xFF00)>>8); tm[133] = (uint8_t)(crc16&0x00FF); tm[0] = 0x60; tm[1] = tc[0]; tm[2] = ACK_CODE; printf("Written on Flash\r\n"); break; } default: { printf("Invalid TC"); //ACK_L234_telemetry telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } } break; } case 0x80: { //printf("Function Management Service\r\n"); uint8_t service_subtype=(tc[2]&0x0F); switch(service_subtype) { case 0x01: { printf("FMS Activated\r\n"); uint8_t pid=tc[3]; switch(pid) { case 0xE0: { float mag_data_comm[3]={0,0,0}; float gyro_data_comm[3]={0,0,0}; float moment_comm[3]; printf("ACS_COMSN SOFTWARE\r\n"); //ACK_L234_telemetry ACS_STATE = tc[4]; if(ACS_STATE == 7) // Nominal mode { printf("\n\r Nominal mode \n"); FCTN_ACS_CNTRLALGO(moment_comm,mag_data_comm,gyro_data_comm,0x01,0x00,ACS_DETUMBLING_ALGO_TYPE); printf("\n\r Moment values returned by control algo \n"); for(int i=0; i<3; i++) { printf("%f\t",moment_comm[i]); } } else if(ACS_STATE == 8) // Auto Control { printf("\n\r Auto control mode \n"); FCTN_ACS_CNTRLALGO(moment_comm,mag_data_comm,gyro_data_comm,0x00,0x00,ACS_DETUMBLING_ALGO_TYPE); printf("\n\r Moment values returned by control algo \n"); for(int i=0; i<3; i++) { printf("%f\t",moment_comm[i]); } } else if(ACS_STATE == 9) // Detumbling { FCTN_ACS_CNTRLALGO(moment_comm,mag_data_comm,gyro_data_comm,0x00,0x01,ACS_DETUMBLING_ALGO_TYPE); printf("\n\r Moment values returned by control algo \n"); for(int i=0; i<3; i++) { printf("%f\t",moment_comm[i]); } } else { ACS_STATUS = 7; } // Control algo commissioning FCTN_CONVERT_FLOAT(moment_comm[0],&telemetry[4]); //telemetry[4] - telemetry[7] FCTN_CONVERT_FLOAT(moment_comm[1],&telemetry[8]); //telemetry[8] - telemetry[11] FCTN_CONVERT_FLOAT(moment_comm[2],&telemetry[12]); //telemetry[12] - telemetry[15] // to include commission TR as well for(uint8_t i=16;i<132;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,132); telemetry[133] = (uint8_t)((crc16&0xFF00)>>8); telemetry[134] = (uint8_t)(crc16&0x00FF); break; } case 0xE1: { printf("HARDWARE_COMSN\r\n"); //ACK_L234_telemetry int init1=0; int init2=0; int data1=0; int data2=0; float PWM_tc[3]; PWM_tc[0]=(float(tc[4]))*1; PWM_tc[1]=(float(tc[4]))*1; PWM_tc[2]=(float(tc[4]))*1; DRV_Z_EN = 1; DRV_XY_EN = 1; telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; PWM1 = 0; PWM2 = 0; PWM3 = 0; wait_ms(ACS_DEMAG_TIME_DELAY); ATS2_SW_ENABLE = 1; wait_ms(5); ATS1_SW_ENABLE = 0; wait_ms(5); init1 = SENSOR_INIT(); if( init1 == 1) { data1 = SENSOR_DATA_ACQ(); } ATS1_SW_ENABLE = 1; wait_ms(5); ATS2_SW_ENABLE = 0; wait_ms(5); if(data1 == 0) { ATS2_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0xC0; } else if(data1==1) { ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x10; } else if(data1==2) { ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x20; } else if(data1==3) { ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x30; } init2 = SENSOR_INIT(); if( init2 == 1) { data2 = SENSOR_DATA_ACQ(); } uint8_t ats_data=1; if(data2 == 0) { ATS2_SW_ENABLE = 1; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x0C; if(data1 == 2) { ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x06; } else if(data1 == 3) { ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x07; } else if(data1 == 1) { ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x05; ats_data = 0; } } else if(data2==1) { if(data1 == 2) { ATS2_SW_ENABLE = 1; wait_ms(5); ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x01; ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x60; } else if(data1 == 3) { ATS2_SW_ENABLE = 1; wait_ms(5); ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x01; ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x70; } else { ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x05; ats_data = 0; } } else if(data2==2) { if(data1 == 3) { ATS2_SW_ENABLE = 1; wait_ms(5); ATS1_SW_ENABLE = 0; wait_ms(5); ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x02; ACS_ATS_STATUS = (ACS_ATS_STATUS&0x0F)|0x70; } else { ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x06; } } else if(data2==3) { ACS_ATS_STATUS = (ACS_ATS_STATUS&0xF0)|0x07; } SelectLineb3 =0; SelectLineb2 =1; SelectLineb1 =0; SelectLineb0 =1; int resistance; PWM1 = PWM_tc[0]; PWM2 = 0; PWM3 = 0; wait_ms(ACS_DEMAG_TIME_DELAY); if(ats_data == 0) SENSOR_DATA_ACQ(); actual_data.current_actual[5]=CurrentInput.read(); actual_data.current_actual[5]= actual_data.current_actual[5]*3.3/(50*rsens); resistance=24000*actual_data.current_actual[5]/(3.3-actual_data.current_actual[5]); if(actual_data.current_actual[5]>1.47) { actual_data.current_actual[5]=3694/log(24.032242*resistance); } else{ actual_data.current_actual[5]=3365.4/log(7.60573*resistance); } FCTN_CONVERT_FLOAT(actual_data.current_actual[5],&telemetry[3 + (0*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[0],&telemetry[3 + (1*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[1],&telemetry[3 + (2*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[2],&telemetry[3 + (3*4)]); PWM1 = 0; PWM2 = PWM_tc[1]; PWM3 = 0; wait_ms(ACS_DEMAG_TIME_DELAY); if(ats_data == 0) SENSOR_DATA_ACQ(); actual_data.current_actual[5]=CurrentInput.read(); actual_data.current_actual[5]= actual_data.current_actual[5]*3.3/(50*rsens); resistance=24000*actual_data.current_actual[5]/(3.3-actual_data.current_actual[5]); if(actual_data.current_actual[5]>1.47) { actual_data.current_actual[5]=3694/log(24.032242*resistance); } else{ actual_data.current_actual[5]=3365.4/log(7.60573*resistance); } FCTN_CONVERT_FLOAT(actual_data.current_actual[5],&telemetry[3 + (4*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[0],&telemetry[3 + (5*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[1],&telemetry[3 + (6*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[2],&telemetry[3 + (7*4)]); PWM1 = 0; PWM2 = 0; PWM3 = PWM_tc[2]; wait_ms(ACS_DEMAG_TIME_DELAY); if(ats_data == 0) SENSOR_DATA_ACQ(); actual_data.current_actual[5]=CurrentInput.read(); actual_data.current_actual[5]= actual_data.current_actual[5]*3.3/(50*rsens); resistance=24000*actual_data.current_actual[5]/(3.3-actual_data.current_actual[5]); if(actual_data.current_actual[5]>1.47) { actual_data.current_actual[5]=3694/log(24.032242*resistance); } else{ actual_data.current_actual[5]=3365.4/log(7.60573*resistance); } FCTN_CONVERT_FLOAT(actual_data.current_actual[5],&telemetry[3 + (4*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[0],&telemetry[3 + (5*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[1],&telemetry[3 + (6*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[2],&telemetry[3 + (7*4)]); PWM1 = 0; PWM2 = 0; PWM3 = 0; wait_ms(ACS_DEMAG_TIME_DELAY); if(ats_data == 0) SENSOR_DATA_ACQ(); actual_data.current_actual[5]=CurrentInput.read(); actual_data.current_actual[5]= actual_data.current_actual[5]*3.3/(50*rsens); resistance=24000*actual_data.current_actual[5]/(3.3-actual_data.current_actual[5]); if(actual_data.current_actual[5]>1.47) { actual_data.current_actual[5]=3694/log(24.032242*resistance); } else{ actual_data.current_actual[5]=3365.4/log(7.60573*resistance); } FCTN_CONVERT_FLOAT(actual_data.current_actual[5],&telemetry[3 + (8*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[0],&telemetry[3 + (9*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[1],&telemetry[3 + (10*4)]); FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[2],&telemetry[3 + (11*4)]); // for(int i=0; i<12; i++) // FCTN_CONVERT_FLOAT(actual_data.current_actual[i],&telemetry[16 + (i*4)]); // FCTN_ATS_DATA_ACQ(); //get data // to include commission TR as well for(uint8_t i=35;i<132;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,132); telemetry[133] = (uint8_t)((crc16&0xFF00)>>8); telemetry[134] = (uint8_t)(crc16&0x00FF); break; } case 0x02: { printf("Run P_EPS_MAIN\r\n"); F_EPS(); //ACK_L234_telemetry telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=0;i<133;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,132); telemetry[132] = (uint8_t)((crc16&0xFF00)>>8); telemetry[133] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x03: { printf("Run P_ACS_INIT\r\n"); FCTN_ACS_INIT(); //ACK_L234_telemetry telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x04: { printf("Run P_ACS_ACQ_DATA\r\n"); FCTN_ATS_DATA_ACQ(); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x05: { printf("Run P_ACS_MAIN\r\n"); F_ACS(); for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(actual_data.Bvalue_actual[i],&telemetry[(i*4)]); for(int i=0; i<3; i++) FCTN_CONVERT_FLOAT(actual_data.AngularSpeed_actual[i],&telemetry[12+(i*4)]); telemetry[24] = ACS_STATE; telemetry[24] = telemetry[5]|(EN_BTRY_HT<<3); telemetry[24] = telemetry[5]|(phase_TR_x<<4); telemetry[24] = telemetry[5]|(phase_TR_y<<5); telemetry[24] = telemetry[5]|(phase_TR_z<<6); /*___________________change / check pwm working__________________________________*/ FCTN_CONVERT_FLOAT(PWM1,&telemetry[25]); FCTN_CONVERT_FLOAT(PWM2,&telemetry[29]); FCTN_CONVERT_FLOAT(PWM3,&telemetry[33]); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,37); telemetry[37] = (uint8_t)((crc16&0xFF00)>>8); telemetry[38] = (uint8_t)(crc16&0x00FF); for(uint8_t i=39;i<134;i++) { telemetry[i]=0x00; } break; } case 0x06: { F_BCN(); printf("Run P_BCN_INIT\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,0); telemetry[0] = (uint8_t)((crc16&0xFF00)>>8); telemetry[1] = (uint8_t)(crc16&0x00FF); for(uint8_t i=2;i<134;i++) { telemetry[i]=0x00; } break; } case 0x07: { printf("Run P_BCN_TX_MAIN\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x11: { printf("SW_ON_ACS_ATS1_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; ATS1_SW_ENABLE = 1; // making sure we switch off the other ATS1_SW_ENABLE = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x12: { printf("SW_ON_ACS_ATS2_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; ATS1_SW_ENABLE = 1; //make sure u switch off the other ATS2_SW_ENABLE = 0; telemetry[2]=1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x13: { printf("SW_ON_ACS_TR_XY_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; TRXY_SW = 1; telemetry[2]=1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x14: { printf("SW_ON_ACS_TR_Z_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; TRZ_SW = 1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x15: { printf("SW_ON_BCN_TX_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; BCN_SW = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x21: { printf("SW_OFF_ACS_ATS1_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; ATS1_SW_ENABLE = 1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x22: { printf("SW_OFF_ACS_ATS2_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; ATS2_SW_ENABLE = 1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x23: { printf("SW_OFF_ACS_TR_XY_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; TRXY_SW= 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x24: { printf("SW_OFF_ACS_TR_Z_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; TRZ_SW = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x25: { printf("SW_OFF_BCN_TX_SW_ENABLE\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; BCN_SW = 1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x31: { printf("ACS_ATS1_SW_RESET\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; ATS1_SW_ENABLE = 1; wait_us(1); ATS1_SW_ENABLE = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x32: { printf("BCN_SW_RESET\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; BCN_SW = 1; wait_us(1); BCN_SW = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x33: { printf("ACS_ATS2_SW_RESET\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; ATS1_SW_ENABLE = 1; wait_us(1); ATS1_SW_ENABLE = 0; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } case 0x34: { printf("CDMS_SW_RESET\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=1; CDMS_RESET = 0; wait_us(1); CDMS_RESET = 1; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } default: { printf("Invalid TC\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } } break; } default: { printf("Invalid TC\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } } break; } default: { printf("Invalid TC\r\n"); //ACK_L234_TM telemetry[0]=0xB0; telemetry[1]=tc[0]; telemetry[2]=ACK_CODE; for(uint8_t i=3;i<11;i++) { telemetry[i]=0x00; } crc16 = CRC::crc16_gen(telemetry,11); telemetry[11] = (uint8_t)((crc16&0xFF00)>>8); telemetry[12] = (uint8_t)(crc16&0x00FF); for(uint8_t i=13;i<134;i++) { telemetry[i]=0x00; } break; } } } int strt_add = flash_size() - (2*SECTOR_SIZE); uint32_t flasharray[8]; //256+(3*1024) char *nativeflash = (char*)strt_add; /*Writing to the Flash*/ void FCTN_CDMS_WR_FLASH(uint16_t j,uint32_t fdata) //j-position to write address ; fdata - flash data to be written { for(int i=0;i<8;i++) { flasharray[i]=nativeflash[i]; } flasharray[j]=fdata; erase_sector(strt_add); program_flash(strt_add, (char*)&flasharray,4*8); } /*End*/ /*Reading from Flash*/ uint32_t FCTN_CDMS_RD_FLASH(uint16_t j) { for(int i=0;i<8;i++) { flasharray[i]=nativeflash[i]; } return flasharray[j]; } /*End*/ // Convert float to 4 uint8_t void FCTN_CONVERT_FLOAT(float input, uint8_t output[4]) { assert(sizeof(float) == sizeof(uint32_t)); uint32_t* temp = reinterpret_cast<uint32_t*>(&input); //float* output1 = reinterpret_cast<float*>(temp); //printf("\n\r %f ", input); //std::cout << "\n\r uint32"<<*temp << std::endl; output[0] =(uint8_t )(((*temp)>>24)&0xFF); output[1] =(uint8_t ) (((*temp)>>16)&0xFF); output[2] =(uint8_t ) (((*temp)>>8)&0xFF); output[3] =(uint8_t ) ((*temp) & 0xFF); // verify the logic printf("\n\rthe values generated are\n"); /*printf("\n\r%x\n",output[0]); printf("\n\r%x\n",output[1]); printf("\n\r%x\n",output[2]); printf("\n\r%x\n",output[3]); to check the values generated */ //printf("\n\r inside %d %d %d %d", output[3],output[2],output[1],output[0]); //std:: cout << "\n\r uint8 inside " << output[3] << '\t' << output[2] << '\t' << output[1] << '\t' << output[0] <<std::endl; }