File content as of revision 5:1458a8f024dc:

#include "mbed.h"
#include "SPI_Encoder.h"


SPI_Encoder::SPI_Encoder(PinName mosi, PinName miso, PinName sclk, PinName _cs0, PinName _cs1, PinName _cs2, PinName _cs3, float t) : encoder(mosi, miso, sclk), cs0(_cs0), cs1(_cs1), cs2(_cs2), cs3(_cs3)
{
    encoder.format(8,1);
    encoder.frequency(1000000);
    delta_t = t;
    for(int i = 0; i < encoder_num; i++)
        direction[i] = 0;
    cs0 = 1;
    cs1 = 1;
    cs2 = 1;
    cs3 = 1;
    wait(0.1); //encoder init
};

void SPI_Encoder::inverse(int num)
{
    direction[num] = 1;
}

bool SPI_Encoder::getPosition(int num)
{
    uint8_t temp[2];
    uint16_t EncoderByteData;
    float pre_angle = angle[num];
    float _angle = 0;
    int stack = 0;
    bool e = false;
    
    uint8_t received = _SPI_T(num, 0x10);   //read command
    while (received != 0x10) {              //loop while encoder is not ready to send
        if(stack > 100) {
            e = true;
            break;
        }
        received = _SPI_T(num, 0x00);
        stack++;
    }
    if(!e) {
        temp[0] = _SPI_T(num, 0x00);       //Recieve MSB
        temp[1] = _SPI_T(num, 0x00);       //recieve LSB
        temp[0] &=~ 0xF0;                  //mask out the first 4 bits
        EncoderByteData  = temp[0] << 8;
        EncoderByteData  += temp[1];
        
        if(!direction[num]) _angle = EncoderByteData / 4096.0f * 2.0f * PI;    //normal
        else _angle = abs((EncoderByteData / 4096.0f * 2.0f * PI) - 2.0f * PI);  //inverse
        if(_angle > PI) angle[num] = _angle - 2 * PI;                            //0~2π → -π~π
        else angle[num] = _angle;
        
        velocity[num] = (angle[num] - pre_angle) / delta_t;
        
        return 0;
    }
    else {
        angle[num] = pre_angle;
        velocity[num] = 0;
        
        return 1;
    }
}

bool SPI_Encoder::setZero(int num)
{
    uint8_t received = _SPI_T(num, 0x70);   //read command
    while (received != 0x80) {              //loop while encoder is not ready to send
        received = _SPI_T(num, 0x00);
    }
    return true;
}

/* switch MSB or LSB */
uint8_t SPI_Encoder::_SPI_T (int num, uint8_t SPITransmit)
{
    _switching(num, 0);
    uint8_t SPI_temp = encoder.write(SPITransmit);
    _switching(num, 1);
    wait_us(20);            //Timmig is critical
    return (SPI_temp);
}

/* switch read encoder */
void SPI_Encoder::_switching(int num, int value)
{
    switch (num) {
        case 0:
            cs0 = value;
            break;
        case 1:
            cs1 = value;
            break;
        case 2:
            cs2 = value;
            break;
        case 3:
            cs3 = value;
            break;
        default:
            break;
    }
}