mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
Diff: targets/TARGET_STM/rtc_api.c
- Revision:
- 160:d5399cc887bb
- Parent:
- 154:37f96f9d4de2
- Child:
- 165:e614a9f1c9e2
--- a/targets/TARGET_STM/rtc_api.c Tue Feb 28 17:13:35 2017 +0000 +++ b/targets/TARGET_STM/rtc_api.c Tue Mar 14 16:40:56 2017 +0000 @@ -82,9 +82,7 @@ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { error("PeriphClkInitStruct RTC failed with LSE\n"); } - #else /* !RTC_LSI */ - __PWR_CLK_ENABLE(); // Reset Backup domain @@ -108,7 +106,6 @@ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) { error("PeriphClkInitStruct RTC failed with LSI\n"); } - #endif /* !RTC_LSI */ // Enable RTC @@ -173,11 +170,23 @@ } /* - RTC Registers - RTC_WeekDay 1=monday, 2=tuesday, ..., 7=sunday - RTC_Month 1=january, 2=february, ..., 12=december - RTC_Date day of the month 1-31 - RTC_Year year 0-99 + ST RTC_DateTypeDef structure + WeekDay 1=monday, 2=tuesday, ..., 7=sunday + Month 0x1=january, 0x2=february, ..., 0x12=december + Date day of the month 1-31 + Year year 0-99 + + ST RTC_TimeTypeDef structure + Hours 0-12 if the RTC_HourFormat_12 is selected during init + 0-23 if the RTC_HourFormat_24 is selected during init + Minutes 0-59 + Seconds 0-59 + TimeFormat RTC_HOURFORMAT12_AM/RTC_HOURFORMAT12_PM + SubSeconds time unit range between [0-1] Second with [1 Sec / SecondFraction +1] granularity + SecondFraction range or granularity of Sub Second register content corresponding to Synchronous pre-scaler factor value (PREDIV_S) + DayLightSaving RTC_DAYLIGHTSAVING_SUB1H/RTC_DAYLIGHTSAVING_ADD1H/RTC_DAYLIGHTSAVING_NONE + StoreOperation RTC_STOREOPERATION_RESET/RTC_STOREOPERATION_SET + struct tm tm_sec seconds after the minute 0-61 tm_min minutes after the hour 0-59 @@ -189,6 +198,22 @@ tm_yday days since January 1 0-365 tm_isdst Daylight Saving Time flag */ + +/* +Information about STM32F0, STM32F2, STM32F3, STM32F4, STM32F7, STM32L0, STM32L1, STM32L4: +BCD format is used to store the date in the RTC. The year is store on 2 * 4 bits. +Because the first year is reserved to see if the RTC is init, the supposed range is 01-99. +1st point is to cover the standard range from 1970 to 2038 (limited by the 32 bits of time_t). +2nd point is to keep the year 1970 and the leap years synchronized. + +So by moving it 68 years forward from 1970, it become 1969-2067 which include 1970-2038. +68 is also a multiple of 4 so it let the leap year synchronized. + +Information about STM32F1: +32bit register is used (no BCD format) for the seconds and a software structure to store dates. +It is then not a problem to not use shifts. +*/ + time_t rtc_read(void) { RTC_DateTypeDef dateStruct; @@ -199,11 +224,11 @@ // Read actual date and time // Warning: the time must be read first! - HAL_RTC_GetTime(&RtcHandle, &timeStruct, FORMAT_BIN); - HAL_RTC_GetDate(&RtcHandle, &dateStruct, FORMAT_BIN); + HAL_RTC_GetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN); + HAL_RTC_GetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN); // Setup a tm structure based on the RTC - timeinfo.tm_wday = dateStruct.WeekDay; + /* tm_wday information is ignored by mktime */ timeinfo.tm_mon = dateStruct.Month - 1; timeinfo.tm_mday = dateStruct.Date; timeinfo.tm_year = dateStruct.Year + 68; @@ -230,7 +255,11 @@ struct tm *timeinfo = localtime(&t); // Fill RTC structures - dateStruct.WeekDay = timeinfo->tm_wday; + if (timeinfo->tm_wday == 0) { + dateStruct.WeekDay = 7; + } else { + dateStruct.WeekDay = timeinfo->tm_wday; + } dateStruct.Month = timeinfo->tm_mon + 1; dateStruct.Date = timeinfo->tm_mday; dateStruct.Year = timeinfo->tm_year - 68; @@ -245,21 +274,17 @@ #endif /* TARGET_STM32F1 */ // Change the RTC current date/time - HAL_RTC_SetDate(&RtcHandle, &dateStruct, FORMAT_BIN); - HAL_RTC_SetTime(&RtcHandle, &timeStruct, FORMAT_BIN); + HAL_RTC_SetDate(&RtcHandle, &dateStruct, RTC_FORMAT_BIN); + HAL_RTC_SetTime(&RtcHandle, &timeStruct, RTC_FORMAT_BIN); } int rtc_isenabled(void) { -#if DEVICE_LOWPOWERTIMER - if ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) { - return 1; - } else { - return 0; - } -#else /* DEVICE_LOWPOWERTIMER */ - return 1; -#endif /* DEVICE_LOWPOWERTIMER */ +#if !(TARGET_STM32F1) + return ( ((RTC->ISR & RTC_ISR_INITS) == RTC_ISR_INITS) && ((RTC->ISR & RTC_ISR_RSF) == RTC_ISR_RSF) ); +#else /* TARGET_STM32F1 */ + return ((RTC->CRL & RTC_CRL_RSF) == RTC_CRL_RSF); +#endif /* TARGET_STM32F1 */ } #if DEVICE_LOWPOWERTIMER @@ -308,5 +333,4 @@ } #endif /* DEVICE_LOWPOWERTIMER */ - #endif /* DEVICE_RTC */