Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Dependencies: HTTPClient WIZnet_Library mbed WIZnetInterface
Homepage
1. WIZwiki-W7500
Prerequisite¶
This example is for sending data to DweetIO.
To implement this function, you need a Platform board, network Interface board.
- WIZwiki-W7500 from WIZnet (Platform board and Ethernet I/F board)
- ETC: PGM5537(CDS sensor) + 10k resistor
Hardware Configuration¶
WIZwiki-W7500 Pin map¶


Software¶
main.cpp
#include "mbed.h"
#include "HTTPClient.h"
#ifdef TARGET_LPC11U68
#include "WIZnetInterface.h"
#endif
#if defined(TARGET_WIZWIKI_W7500)
#include "EthernetInterface.h"
#endif
#define USE_DHCP 0
const char * IP_Addr = "IP Address";
const char * IP_Subnet = "IP Subnet";
const char * IP_Gateway = "IP Gateway";
unsigned char MAC_Addr[6] = {0x00,0x08,0xDC,0x12,0x34,0x56};
Serial pc(USBTX, USBRX);
#ifdef TARGET_LPC11U68
SPI spi(P0_9,P0_8,P1_29);
WIZnetInterface ethernet(&spi,P0_2,P1_13);
AnalogIn CDSSensor(P1_9);//Analog A0 input. pgm5537 CDS sensor and 10k resistor.
/******************
VCC A0 GND
| | |
| | |
| | |
| | |
--10k-----CDS---
*******************/
#endif
#if defined(TARGET_WIZWIKI_W7500)
EthernetInterface ethernet;
Serial pc(USBTX, USBRX);
AnalogIn CDSSensor(PC_15);//Analog A0 input. pgm5537 CDS sensor and 10k resistor.
#endif
int main() {
mbed_mac_address((char *)MAC_Addr); //Use mbed mac addres
pc.baud(115200);
#if USE_DHCP
int ret = ethernet.init(MAC_Addr);
#else
int ret = ethernet.init(MAC_Addr,IP_Addr,IP_Subnet,IP_Gateway);
#endif
if (!ret) {
pc.printf("Initialized, MAC: %s\r\n", ethernet.getMACAddress());
ret = ethernet.connect();
if (!ret) {
pc.printf("IP: %s, MASK: %s, GW: %s\r\n",
ethernet.getIPAddress(), ethernet.getNetworkMask(), ethernet.getGateway());
} else {
pc.printf("Error ethernet.connect() - ret = %d\r\n", ret);
exit(0);
}
} else {
pc.printf("Error ethernet.init() - ret = %d\r\n", ret);
exit(0);
}
char str[512] = "";
char get_msg[128]= "";
/*
http://dweet.io/follow/nameYouWant
*/
char nameYouWant[] = "nameYouWant";
while(1)
{
sprintf(get_msg,"http://dweet.io/dweet/for/%s?a0=%d",nameYouWant,(int)(CDSSensor.read()*1000));
HTTPClient http;
pc.printf("Send post message to dweet.io\r\n");
pc.printf("msg : %s\r\n",get_msg);
ret = http.get(get_msg, str, sizeof(str));
if(!ret)
{
pc.printf("\r\nPage fetched successfully - read %d characters\r\n", strlen(str));
pc.printf("Result: %s\r\n", str);
}
else
{
pc.printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
}
wait(10);
}
}
2. W5500 Ethernet Kit
- Platform: LPCXpresso11U68
- Component: W5500 Ethernet kit for IoT.
- ETC: PGM5537 + 10k resistor
now, I can send data to dweet.io & freeboard.io but so simple ;).

thanks to Andr.oid Eric(http://arduino-er.blogspot.kr/2015/04/iot-experience-arduino-uno-ethernet.html)