WIZnet
Servo_HelloWorld Example for WIZwiki-W7500
Fork of
Servo_HelloWorld
by 
Simon Ford
Prerequisite
This example is for servo motor test using digital I/O(PWM).
To implement this function, you need a Platform board, network Interface board.
- WIZwiki-W7500 from WIZnet (Platform board and Ethernet I/F board)
Hardware Configuration
WIZwiki-W7500 Pin map
Servo Motor(HS-5585MH)
Wiring Table
| HS-5585 | W7500 |
| VCC | 5V |
| GND | GND |
| SIGNAL | D14 |
Software
Init GPIO
Servo myservo(D14);
Set data to Servo
for(float p=0; p<1.0; p += 0.1) {
myservo = p;
wait(0.2);
}
Caution
When wiring, be careful (GND, VCC)
Revision 2:5695dfde1449, committed 2015-06-29
- Comitter:
- justinkim
- Date:
- Mon Jun 29 03:18:22 2015 +0000
- Parent:
- 1:40d2fd0b99e6
- Commit message:
- Servo_HelloWorld Example for WIZwiki-W7500
Changed in this revision
diff -r 40d2fd0b99e6 -r 5695dfde1449 main.cpp
--- a/main.cpp Tue Nov 23 16:10:35 2010 +0000
+++ b/main.cpp Mon Jun 29 03:18:22 2015 +0000
@@ -3,7 +3,7 @@
#include "mbed.h"
#include "Servo.h"
-Servo myservo(p21);
+Servo myservo(D14);
int main() {
for(float p=0; p<1.0; p += 0.1) {
diff -r 40d2fd0b99e6 -r 5695dfde1449 mbed-src.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed-src.lib Mon Jun 29 03:18:22 2015 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed-src/#30f9462b5296
diff -r 40d2fd0b99e6 -r 5695dfde1449 mbed.bld --- a/mbed.bld Tue Nov 23 16:10:35 2010 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +0,0 @@ -http://mbed.org/users/mbed_official/code/mbed/builds/e2ac27c8e93e