SSD1306_LCD Example for WIZwiki-W7500
Dependencies: Adafruit_GFX mbed-dev
Prerequisite
This example is for OLED test.
To implement this function, you need a Platform board and OLED.
Below are what we used.
- WIZwiki-W7500 from WIZnet (Platform board)
- OLED from WIZnet
Hardware Configuration
WIZwiki-W7500 Pin map
OLED (from WIZnet)
Wiring Table
OLED | W7500 |
SCL | PA_9 |
SDA | PA_10 |
GND | GND |
VCC | VCC |
Software
Define Pins
main.cpp
#if defined(TARGET_WIZwiki_W7500) #define SDA PA_10 #define SCL PA_9 #endif
Set data for OLED
main.cpp
gOled.begin(); gOled.printf("%ux%u OLED Display\r\n", gOled.width(), gOled.height()); gOled.display();
Caution
watchout pins setting
Diff: mbed-src.lib
- Revision:
- 1:6b03b9f64311
- Parent:
- 0:81a58b2fb28e
diff -r 81a58b2fb28e -r 6b03b9f64311 mbed-src.lib --- a/mbed-src.lib Tue Jun 23 09:49:31 2015 +0000 +++ b/mbed-src.lib Thu Jun 25 05:29:49 2015 +0000 @@ -1,1 +1,1 @@ -http://mbed.org/users/mbed_official/code/mbed-src/#c0158e191c68 +http://developer.mbed.org/users/kaizen/code/mbed-src/#9fa26d516dae