WIZnet
ESP8266 test with W7500. You can monitor UART Tx/RX of ESP8266.
Dependencies: ESP8266Interface
Fork of
ESP8266_Test
by 
ESP8266
I tested ESD-01(ESP8266 module) with WIZwiki-W7500 platform as below.
You can see the all log of this test as below. And with this ESP8266Interface class, you can monitor Tx/Rx of ESP8266 module UART.
WIZwiki-W7500 with ESP8266 Test. AT OK AT+RST OK ets Jan 8 2013,rst cause:4, boot mode:(3,6) wdt reset load 0x40100000, len 612, room 16 tail 4 chksum 0x12 load 0x3ffe8000, len 788, room 4 tail 0 chksum 0x50 load 0x3ffe8314, len 264, room 8 tail 0 chksum 0x4a csum 0x4a 2nd boot version : 1.1 SPI Speed : 40MHz SPI Mode : QIO SPI Flash Size : 4Mbit jump to run user1 s ready AT+CWDHCP=1,1 OK AT+CWMODE=1 OK AT+CWJAP="WizFiDemoAP","12345678" OK AT+CIPSTART="TCP","192.168.3.64",8000 CONNECT OK AT+CIPMODE=1 OK AT+CIPSEND >AT+CIPCLOSE CLOSED OK
Changes
| Revision | Date | Who | Commit message |
|---|---|---|---|
| 12:4e8842ddee84 | 2015-07-14 | SteveKim | ESP8266 basic test with W7500.; And you can monitor UART Tx/Rx data of ESP8266.; |
| 11:8acce2b8af6e | 2015-05-01 | mbedAustin | Schenanigans |
| 10:93c10fdd9b6a | 2015-05-01 | mbedAustin | TCP Working, UDP Not Working |
| 9:91fe783e1dd4 | 2015-05-01 | mbedAustin | Working with TCP, not working with UDP yet. |
| 8:af3b0b5438ad | 2015-05-01 | mbedAustin | safety commit, working on UDP |
| 7:d2c97b20d237 | 2015-04-30 | mbedAustin | Validation of TCP with TCPEchoClient (http://developer.mbed.org/teams/mbed/code/TCPEchoClient/) |
| 6:9ca92d1d90dd | 2015-04-30 | mbedAustin | TCP Send / Receive Working |
| 5:c8d53f48a975 | 2015-04-30 | mbedAustin | safety commit |
| 4:d02fdd139307 | 2015-04-29 | mbedAustin | safety save |
| 3:5175e53017e4 | 2015-04-28 | mbedAustin | IP Function Works |
| 2:44dca280b049 | 2015-04-20 | michaeljkoster | Test program for ESP8266 |
| 1:f61c1001ee60 | 2015-04-20 | michaeljkoster | ESP8266 test program |
| 0:6a891da014a3 | 2014-12-24 | michaeljkoster | Initial commit |