SDHI_driver patch (mbedOS 5.11.5)
mbed-os-program/mbed-os/components/storage/blockdevice/COMPONENT_RZ_SDHI/driver/sdif.h
- Committer:
- tvendov
- Date:
- 2019-03-29
- Revision:
- 2:7c75ab32d7c9
File content as of revision 2:7c75ab32d7c9:
/****************************************************************************** * DISCLAIMER * * This software is supplied by Renesas Electronics Corporation and is only * intended for use with Renesas products. No other uses are authorized. * * This software is owned by Renesas Electronics Corporation and is protected under * all applicable laws, including copyright laws. * * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES * REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, * INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY * DISCLAIMED. * * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES * FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS * AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. * * Renesas reserves the right, without notice, to make changes to this * software and to discontinue the availability of this software. * By using this software, you agree to the additional terms and * conditions found by accessing the following link: * http://www.renesas.com/disclaimer ******************************************************************************** * Copyright (C) 2013 Renesas Electronics Corporation. All rights reserved. **************************** Technical reference data ************************** * System Name : SD Driver Sample Program * File Name : sdif.h * Abstract : SD Memory card driver configration * Version : 4.00.00 * Device : Aragon * Tool-Chain : DS-5 Ver 5.13 * ARM Complier * OS : None * H/W Platform: * Description : ******************************************************************************** * History : 2013.07.12 Ver.4.00.00 *******************************************************************************/ #ifndef _SDDRV_H_ #define _SDDRV_H_ #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ /* ==== define ==== */ /* ---- SD Driver work buffer ---- */ #define SD_SIZE_OF_INIT 800 /* ---- error code ---- */ #define SD_OK_LOCKED_CARD 1 /* OK but card is locked status */ #define SD_OK 0 /* OK */ #define SD_ERR -1 /* general error */ #define SD_ERR_WP -2 /* write protect error */ #define SD_ERR_RO -3 /* read only error */ #define SD_ERR_RES_TOE -4 /* response time out error */ #define SD_ERR_CARD_TOE -5 /* card time out error */ #define SD_ERR_END_BIT -6 /* end bit error */ #define SD_ERR_CRC -7 /* CRC error */ #define SD_ERR_CARD_RES -8 /* card response error */ #define SD_ERR_HOST_TOE -9 /* host time out error */ #define SD_ERR_CARD_ERASE -10 /* card erase error */ #define SD_ERR_CARD_LOCK -11 /* card lock error */ #define SD_ERR_CARD_UNLOCK -12 /* card unlock error */ #define SD_ERR_HOST_CRC -13 /* host CRC error */ #define SD_ERR_CARD_ECC -14 /* card internal ECC error */ #define SD_ERR_CARD_CC -15 /* card internal error */ #define SD_ERR_CARD_ERROR -16 /* unknown card error */ #define SD_ERR_CARD_TYPE -17 /* non support card type */ #define SD_ERR_NO_CARD -18 /* no card */ #define SD_ERR_ILL_READ -19 /* illegal buffer read */ #define SD_ERR_ILL_WRITE -20 /* illegal buffer write */ #define SD_ERR_AKE_SEQ -21 /* the sequence of authentication process */ #define SD_ERR_OVERWRITE -22 /* CID/CSD overwrite error */ /* 23-29 */ #define SD_ERR_CPU_IF -30 /* target CPU interface function error */ #define SD_ERR_STOP -31 /* user stop */ /* 32-49 */ #define SD_ERR_CSD_VER -50 /* CSD register version error */ #define SD_ERR_SCR_VER -51 /* SCR register version error */ #define SD_ERR_FILE_FORMAT -52 /* CSD register file format error */ #define SD_ERR_NOTSUP_CMD -53 /* not supported command */ /* 54-59 */ #define SD_ERR_ILL_FUNC -60 /* invalid function request error */ #define SD_ERR_IO_VERIFY -61 /* direct write verify error */ #define SD_ERR_IO_CAPAB -62 /* IO capability error */ /* 63-69 */ #define SD_ERR_IFCOND_VER -70 /* Interface condition version error */ #define SD_ERR_IFCOND_VOLT -71 /* Interface condition voltage error */ #define SD_ERR_IFCOND_ECHO -72 /* Interface condition echo back pattern error */ /* 73-79 */ #define SD_ERR_OUT_OF_RANGE -80 /* the argument was out of range */ #define SD_ERR_ADDRESS_ERROR -81 /* misassigned address */ #define SD_ERR_BLOCK_LEN_ERROR -82 /* transfered block length is not allowed */ #define SD_ERR_ILLEGAL_COMMAND -83 /* Command not legal */ #define SD_ERR_RESERVED_ERROR18 -84 /* Reserved bit 18 Error */ #define SD_ERR_RESERVED_ERROR17 -85 /* Reserved bit 17 Error */ #define SD_ERR_CMD_ERROR -86 /* SD_INFO2 bit 0 CMD error */ #define SD_ERR_CBSY_ERROR -87 /* SD_INFO2 bit 14 CMD Type Reg Busy error */ #define SD_ERR_NO_RESP_ERROR -88 /* SD_INFO1 bit 0 No Response error */ /* 89 */ /* 90-95 */ #define SD_ERR_ERROR -96 /* SDIO ERROR */ #define SD_ERR_FUNCTION_NUMBER -97 /* SDIO FUNCTION NUMBER ERROR */ #define SD_ERR_COM_CRC_ERROR -98 /* SDIO CRC ERROR */ #define SD_ERR_INTERNAL -99 /* driver software internal error */ /* ---- driver mode ---- */ #define SD_MODE_POLL 0x0000ul /* status check mode is software polling */ #define SD_MODE_HWINT 0x0001ul /* status check mode is hardware interrupt */ #define SD_MODE_SW 0x0000ul /* data transfer mode is software */ #define SD_MODE_DMA 0x0002ul /* data transfer mode is DMA */ #define SD_MODE_DMA_64 0x0004ul /* data transfer mode is DMA with 64 byte burst mode */ /* ---- support mode ---- */ #define SD_MODE_MEM 0x0000ul /* memory cards only are supported */ #define SD_MODE_IO 0x0010ul /* memory and io cards are supported */ #define SD_MODE_COMBO 0x0030ul /* memory ,io and combo cards are supported */ #define SD_MODE_DS 0x0000ul /* only default speed mode is supported */ #define SD_MODE_HS 0x0040ul /* high speed mode is also supported */ #define SD_MODE_VER1X 0x0000ul /* ver1.1 host */ #define SD_MODE_VER2X 0x0080ul /* ver2.x host (high capacity and dual voltage) */ #define SD_MODE_1BIT 0x0100ul /* SD Mode 1bit only is supported */ #define SD_MODE_4BIT 0x0000ul /* SD Mode 1bit and 4bit is supported */ /* ---- media voltage ---- */ #define SD_VOLT_1_7 0x00000010ul /* low voltage card minimum */ #define SD_VOLT_1_8 0x00000020ul #define SD_VOLT_1_9 0x00000040ul #define SD_VOLT_2_0 0x00000080ul #define SD_VOLT_2_1 0x00000100ul /* basic communication minimum */ #define SD_VOLT_2_2 0x00000200ul #define SD_VOLT_2_3 0x00000400ul #define SD_VOLT_2_4 0x00000800ul #define SD_VOLT_2_5 0x00001000ul #define SD_VOLT_2_6 0x00002000ul #define SD_VOLT_2_7 0x00004000ul #define SD_VOLT_2_8 0x00008000ul /* memory access minimum */ #define SD_VOLT_2_9 0x00010000ul #define SD_VOLT_3_0 0x00020000ul #define SD_VOLT_3_1 0x00040000ul #define SD_VOLT_3_2 0x00080000ul #define SD_VOLT_3_3 0x00100000ul #define SD_VOLT_3_4 0x00200000ul #define SD_VOLT_3_5 0x00400000ul #define SD_VOLT_3_6 0x00800000ul /* ---- memory card write mode ---- */ #define SD_WRITE_WITH_PREERASE 0x0000u /* pre-erease write */ #define SD_WRITE_OVERWRITE 0x0001u /* overwrite */ /* ---- io register write mode ---- */ #define SD_IO_SIMPLE_WRITE 0x0000u /* just write */ #define SD_IO_VERIFY_WRITE 0x0001u /* read after write */ /* ---- io operation code ---- */ #define SD_IO_FIXED_ADDR 0x0000u /* R/W fixed address */ #define SD_IO_INCREMENT_ADDR 0x0001u /* R/W increment address */ #define SD_IO_FORCE_BYTE 0x0010u /* byte access only */ /* ---- media type ---- */ #define SD_MEDIA_UNKNOWN 0x0000u /* unknown media */ #define SD_MEDIA_MMC 0x0010u /* MMC card */ #define SD_MEDIA_SD 0x0020u /* SD Memory card */ #define SD_MEDIA_IO 0x0001u /* SD IO card */ #define SD_MEDIA_MEM 0x0030u /* Memory card */ #define SD_MEDIA_COMBO 0x0021u /* SD COMBO card */ #define SD_MEDIA_EMBEDDED 0x8000u /* embedded media */ /* ---- write protect info --- */ #define SD_WP_OFF 0x0000u /* card is not write protect */ #define SD_WP_HW 0x0001u /* card is H/W write protect */ #define SD_WP_TEMP 0x0002u /* card is TEMP_WRITE_PROTECT */ #define SD_WP_PERM 0x0004u /* card is PERM_WRITE_PROTECT */ #define SD_WP_ROM 0x0010u /* card is SD-ROM */ /* ---- SD clock div ---- */ /* IMCLK is host controller clock */ #define SD_DIV_512 0x0080u /* SDCLOCK = IMCLK/512 */ #define SD_DIV_256 0x0040u /* SDCLOCK = IMCLK/256 */ #define SD_DIV_128 0x0020u /* SDCLOCK = IMCLK/128 */ #define SD_DIV_64 0x0010u /* SDCLOCK = IMCLK/64 */ #define SD_DIV_32 0x0008u /* SDCLOCK = IMCLK/32 */ #define SD_DIV_16 0x0004u /* SDCLOCK = IMCLK/16 */ #define SD_DIV_8 0x0002u /* SDCLOCK = IMCLK/8 */ #define SD_DIV_4 0x0001u /* SDCLOCK = IMCLK/4 */ #define SD_DIV_2 0x0000u /* SDCLOCK = IMCLK/2 */ #define SD_DIV_1 0x00FFu /* SDCLOCK = IMCLK (option) */ /* ---- SD clock define ---- */ /* max frequency */ #define SD_CLK_400kHz 0x0000u /* 400kHz */ #define SD_CLK_1MHz 0x0001u /* 1MHz */ #define SD_CLK_5MHz 0x0002u /* 5MHz */ #define SD_CLK_10MHz 0x0003u /* 10MHz */ #define SD_CLK_20MHz 0x0004u /* 20MHz */ #define SD_CLK_25MHz 0x0005u /* 25MHz */ #define SD_CLK_50MHz 0x0006u /* 50MHz (phys spec ver1.10) */ /* ---- speed class ---- */ #define SD_SPEED_CLASS_0 0x00u /* not defined, or less than ver2.0 */ #define SD_SPEED_CLASS_2 0x01u /* 2MB/sec */ #define SD_SPEED_CLASS_4 0x02u /* 4MB/sec */ #define SD_SPEED_CLASS_6 0x03u /* 6MB/sec */ /* ---- IO initialize flags define ---- */ /* add for IO */ #define SD_IO_INT_ENAB 0x10u /* interrupt enable */ #define SD_IO_POWER_INIT 0x04u /* power on initialized */ #define SD_IO_MEM_INIT 0x02u /* memory initialized */ #define SD_IO_FUNC_INIT 0x01u /* io func initialized */ /* ---- IO function's information ---- */ /* add for IO */ #define SD_IO_FUNC_READY 0x80u /* io redy */ #define SD_IO_FUNC_NUM 0x70u /* number of io func */ #define SD_IO_FUNC_EXISTS 0x04u /* memory present */ /* ---- SD port mode ---- */ #define SD_PORT_SERIAL 0x0000u /* 1bit mode */ #define SD_PORT_PARALLEL 0x0001u /* 4bits mode */ /* ---- SD Card detect port ---- */ #define SD_CD_SOCKET 0x0000u /* CD pin */ #define SD_CD_DAT3 0x0001u /* DAT3 pin */ /* ---- SD Card detect interrupt ---- */ #define SD_CD_INT_DISABLE 0x0000u /* card detect interrupt disable */ #define SD_CD_INT_ENABLE 0x0001u /* card detect interrupt enable */ /* ---- format mode ---- */ #define SD_FORMAT_QUICK 0x0000u /* quick format */ #define SD_FORMAT_FULL 0x0001u /* full format */ /* ---- lock/unlock mode ---- */ #define SD_FORCE_ERASE 0x08 #define SD_LOCK_CARD 0x04 #define SD_UNLOCK_CARD 0x00 #define SD_CLR_PWD 0x02 #define SD_SET_PWD 0x01 /* ==== API prototype ===== */ /* ---- access library I/F ---- */ int sd_init(int sd_port, unsigned long base, void *workarea, int cd_port); int sd_cd_int(int sd_port, int enable,int (*callback)(int, int)); int sd_check_media(int sd_port); int sd_format(int sd_port, int mode,int (*callback)(unsigned long,unsigned long)); int sd_format2(int sd_port, int mode,unsigned long volserial,int (*callback)(unsigned long,unsigned long)); int sd_mount(int sd_port, unsigned long mode,unsigned long voltage); int sd_read_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt); int sd_write_sect(int sd_port, unsigned char *buff,unsigned long psn,long cnt,int writemode); int sd_get_type(int sd_port, unsigned char *type,unsigned char *speed,unsigned char *capa); int sd_get_size(int sd_port, unsigned long *user,unsigned long *protect); int sd_iswp(int sd_port); int sd_unmount(int sd_port); void sd_stop(int sd_port); int sd_set_intcallback(int sd_port, int (*callback)(int, int)); void sd_int_handler(int sd_port); int sd_get_error(int sd_port); int sd_check_int(int sd_port); int sd_get_reg(int sd_port, unsigned char *ocr,unsigned char *cid,unsigned char *csd, unsigned char *dsr,unsigned char *scr); int sd_get_rca(int sd_port, unsigned char *rca); int sd_get_sdstatus(int sd_port, unsigned char *sdstatus); int sd_get_speed(int sd_port, unsigned char *clss,unsigned char *move); int sd_finalize(int sd_port); int sd_set_seccnt(int sd_port, short sectors); int sd_get_seccnt(int sd_port); int sd_get_ver(int sd_port, unsigned short *sdhi_ver,char *sddrv_ver); int sd_set_cdtime(int sd_port, unsigned short cdtime); int sd_set_responsetime(int sd_port, unsigned short responsetime); int sd_set_buffer(int sd_port, void *buff,unsigned long size); int sd_inactive(int sd_port); int sd_set_softwp(int sd_port, int is_set,unsigned long data); int sd_set_tmpwp(int sd_port, int is_set); int sd_lock_unlock(int sd_port, unsigned char code,unsigned char *pwd,unsigned char len); int esd_get_partition_id(int sd_port, int *id); int esd_select_partition(int sd_port, int id); int esd_query_partition(int sd_port, int sub, unsigned char *data); int sdio_read_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr); int sdio_write_direct(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,unsigned long raw_flag); int sdio_check_int(int sd_port); void sdio_int_handler(int sd_port); int sdio_set_intcallback(int sd_port, int (*callback)(int)); int sdio_enable_int(int sd_port); int sdio_disable_int(int sd_port); int sdio_read(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code); int sdio_write(int sd_port, unsigned char *buff,unsigned long func,unsigned long adr,long cnt,unsigned long op_code); int sdio_reset(int sd_port); int sdio_get_ioocr(int sd_port, unsigned long *ioocr); int sdio_get_ioinfo(int sd_port, unsigned char *ioinfo); int sdio_get_cia(int sd_port, unsigned char *reg, unsigned char *cis, unsigned long func_num, long cnt); int sdio_set_enable(int sd_port, unsigned char func_bit); int sdio_get_ready(int sd_port, unsigned char *func_bit); int sdio_set_int(int sd_port, unsigned char func_bit,int enab); int sdio_get_int(int sd_port, unsigned char *func_bit,int *enab); int sdio_set_blocklen(int sd_port, unsigned short len, unsigned long func_num); int sdio_get_blocklen(int sd_port, unsigned short *len, unsigned long func_num); void sdio_abort(int sd_port, unsigned long func_num); int sdio_set_blkcnt(int sd_port, short blocks); int sdio_get_blkcnt(int sd_port); /* ---- target CPU I/F ---- */ int sddev_init(int sd_port); int sddev_power_on(int sd_port); int sddev_power_off(int sd_port); int sddev_read_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num); int sddev_write_data(int sd_port, unsigned char *buff,unsigned long reg_addr,long num); unsigned int sddev_get_clockdiv(int sd_port, int clock); int sddev_set_port(int sd_port, int mode); int sddev_int_wait(int sd_port, int msec); int sddev_init_dma(int sd_port, unsigned long buffadr,unsigned long regadr,long cnt,int dir); int sddev_wait_dma_end(int sd_port, long cnt); int sddev_disable_dma(int sd_port); int sddev_finalize(int sd_port); int sddev_loc_cpu(int sd_port); int sddev_unl_cpu(int sd_port); int sddev_cmd0_sdio_mount(int sd_port); int sddev_cmd8_sdio_mount(int sd_port); #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* _SDDRV_H_ */ /* End of File */