Vekatech
SDHI_driver patch (mbedOS 5.11.5)
mbed-os-program/mbed-os/components/storage/blockdevice/COMPONENT_RZ_SDHI/TESTS/filesystem/fopen/fopen.cpp
- Committer:
- tvendov
- Date:
- 2019-03-29
- Revision:
- 2:7c75ab32d7c9
File content as of revision 2:7c75ab32d7c9:
/*
* mbed Microcontroller Library
* Copyright (c) 2006-2016 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/** @file fopen.cpp Test cases to POSIX file fopen() interface.
*
* Please consult the documentation under the test-case functions for
* a description of the individual test case.
*/
#include "mbed.h"
#include "mbed_config.h"
#include "RZ_SDHIBlockDevice.hpp"
#include "FATFileSystem.h"
#include "fsfat_debug.h"
#include "fsfat_test.h"
#include "utest/utest.h"
#include "unity/unity.h"
#include "greentea-client/test_env.h"
#include <stdio.h>
#include <string.h>
#include <stdlib.h> /*rand()*/
#include <inttypes.h>
#include <errno.h>
/* mbed_retarget.h is included after errno.h so symbols are mapped to
* consistent values for all toolchains */
#include "platform/mbed_retarget.h"
using namespace utest::v1;
/// @cond FSFAT_DOXYGEN_DISABLE
#ifdef FSFAT_DEBUG
#define FSFAT_FOPEN_GREENTEA_TIMEOUT_S 3000
#else
#define FSFAT_FOPEN_GREENTEA_TIMEOUT_S 1000
#endif
/// @endcond
/* DEVICE_SPI
* This symbol is defined in targets.json if the target has a SPI interface, which is required for SDCard support.
*
* MBED_CONF_APP_FSFAT_SDCARD_INSTALLED
* For testing purposes, an SDCard must be installed on the target for the test cases in this file to succeed.
* If the target has an SD card installed then the MBED_CONF_APP_FSFAT_SDCARD_INSTALLED will be generated
* from the mbed_app.json, which includes the line
* {
* "config": {
* "UART_RX": "D0",
* <<< lines removed >>>
* "DEVICE_SPI": 1,
* "FSFAT_SDCARD_INSTALLED": 1
* },
* <<< lines removed >>>
*/
#if DEVICE_SPI && ( defined(MBED_CONF_APP_FSFAT_SDCARD_INSTALLED) || (MBED_CONF_SD_FSFAT_SDCARD_INSTALLED))
static char fsfat_fopen_utest_msg_g[FSFAT_UTEST_MSG_BUF_SIZE];
#define FSFAT_FOPEN_TEST_MOUNT_PT_NAME "sd"
#define FSFAT_FOPEN_TEST_MOUNT_PT_PATH "/" FSFAT_FOPEN_TEST_MOUNT_PT_NAME
#define FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1 64
#define FSFAT_FOPEN_TEST_FILEPATH_MAX_DEPTH 20
static const char *sd_badfile_path = "/sd/badfile.txt";
static const char *sd_testfile_path = "/sd/test.txt";
SDHIBlockDevice sd(MBED_CONF_RZ_SDHI_CH);
FATFileSystem fs("sd", &sd);
#define FSFAT_FOPEN_TEST_00 fsfat_fopen_test_00
#define FSFAT_FOPEN_TEST_01 fsfat_fopen_test_01
#define FSFAT_FOPEN_TEST_02 fsfat_fopen_test_02
#define FSFAT_FOPEN_TEST_03 fsfat_fopen_test_03
#define FSFAT_FOPEN_TEST_04 fsfat_fopen_test_04
#define FSFAT_FOPEN_TEST_05 fsfat_fopen_test_05
#define FSFAT_FOPEN_TEST_06 fsfat_fopen_test_06
#define FSFAT_FOPEN_TEST_07 fsfat_fopen_test_07
#define FSFAT_FOPEN_TEST_08 fsfat_fopen_test_08
#define FSFAT_FOPEN_TEST_09 fsfat_fopen_test_09
#define FSFAT_FOPEN_TEST_10 fsfat_fopen_test_10
#define FSFAT_FOPEN_TEST_11 fsfat_fopen_test_11
#define FSFAT_FOPEN_TEST_12 fsfat_fopen_test_12
#define FSFAT_FOPEN_TEST_13 fsfat_fopen_test_13
#define FSFAT_FOPEN_TEST_14 fsfat_fopen_test_14
#define FSFAT_FOPEN_TEST_15 fsfat_fopen_test_15
#define FSFAT_FOPEN_TEST_16 fsfat_fopen_test_16
#define FSFAT_FOPEN_TEST_17 fsfat_fopen_test_17
#define FSFAT_FOPEN_TEST_18 fsfat_fopen_test_18
#define FSFAT_FOPEN_TEST_19 fsfat_fopen_test_19
#define FSFAT_FOPEN_TEST_20 fsfat_fopen_test_20
#define FSFAT_FOPEN_TEST_21 fsfat_fopen_test_21
#define FSFAT_FOPEN_TEST_22 fsfat_fopen_test_22
#define FSFAT_FOPEN_TEST_23 fsfat_fopen_test_23
#define FSFAT_FOPEN_TEST_24 fsfat_fopen_test_24
#define FSFAT_FOPEN_TEST_25 fsfat_fopen_test_25
#define FSFAT_FOPEN_TEST_26 fsfat_fopen_test_26
#define FSFAT_FOPEN_TEST_27 fsfat_fopen_test_27
#define FSFAT_FOPEN_TEST_28 fsfat_fopen_test_28
#define FSFAT_FOPEN_TEST_29 fsfat_fopen_test_29
#define FSFAT_FOPEN_TEST_30 fsfat_fopen_test_30
/* support functions */
/*
* open tests that focus on testing fopen()
* fsfat_handle_t fopen(const char* filename, char* data, size_t* len, fsfat_key_desc_t* kdesc)
*/
/* file data for test_01 */
static fsfat_kv_data_t fsfat_fopen_test_01_kv_data[] = {
{ "/sd/fopentst/hello/world/animal/wobbly/dog/foot/frontlft.txt", "missing"},
{ NULL, NULL},
};
/** @brief
* Split a file path into its component parts, setting '/' characters to '\0', and returning
* pointers to the file path components in the parts array. For example, if
* filepath = "/sd/fopentst/hello/world/animal/wobbly/dog/foot/frontlft.txt" then
* *parts[0] = "sd"
* *parts[1] = "fopentst"
* *parts[2] = "hello"
* *parts[3] = "world"
* *parts[4] = "animal"
* *parts[5] = "wobbly"
* *parts[6] = "dog"
* *parts[7] = "foot"
* *parts[8] = "frontlft.txt"
* parts[9] = NULL
*
* ARGUMENTS
* @param filepath IN file path string to split into component parts. Expected to start with '/'
* @param parts IN OUT array to hold pointers to parts
* @param num IN number of components available in parts
*
* @return On success, this returns the number of components in the filepath Returns number of compoee
*/
static int32_t fsfat_filepath_split(char *filepath, char *parts[], uint32_t num)
{
uint32_t i = 0;
int32_t ret = -1;
char *z = filepath;
while (i < num && *z != '\0') {
if (*z == '/') {
*z = '\0';
parts[i] = ++z;
i++;
} else {
z++;
}
}
if (*z == '\0' && i > 0) {
ret = (int32_t) i;
}
return ret;
}
/** @brief
* remove all directories and file in the given filepath
*
* ARGUMENTS
* @param filepath IN file path string to split into component parts. Expected to start with '/'
*
* @return On success, this returns 0, otherwise < 0 is returned;
*/
int32_t fsfat_filepath_remove_all(char *filepath)
{
int32_t ret = -1;
int32_t len = 0;
char *fpathbuf = NULL;
char *pos = NULL;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
len = strlen(filepath);
fpathbuf = (char *) malloc(len + 1);
if (fpathbuf == NULL) {
FSFAT_DBGLOG("%s: failed to duplicate string (out of memory)\n", __func__);
return ret;
}
memset(fpathbuf, 0, len + 1);
memcpy(fpathbuf, filepath, len);
/* delete the leaf node first, and then successively parent directories. */
pos = fpathbuf + strlen(fpathbuf);
while (pos != fpathbuf) {
/* If the remaining file path is the mount point path then finish as the mount point cannot be removed */
if (strlen(fpathbuf) == strlen(FSFAT_FOPEN_TEST_MOUNT_PT_PATH)) {
if (strncmp(fpathbuf, FSFAT_FOPEN_TEST_MOUNT_PT_PATH, strlen(fpathbuf)) == 0) {
break;
}
}
ret = remove(fpathbuf);
pos = strrchr(fpathbuf, '/');
*pos = '\0';
}
if (fpathbuf) {
free(fpathbuf);
}
return ret;
}
/** @brief
* make all directories in the given filepath. Do not create the file if present at end of filepath
*
* ARGUMENTS
* @param filepath IN file path containing directories and file
* @param do_asserts IN set to true if function should assert on errors
*
* @return On success, this returns 0, otherwise < 0 is returned;
*/
static int32_t fsfat_filepath_make_dirs(char *filepath, bool do_asserts)
{
int32_t i = 0;
int32_t num_parts = 0;
int32_t len = 0;
int32_t ret = -1;
char *fpathbuf = NULL;
char *buf = NULL;
int pos = 0;
char *parts[FSFAT_FOPEN_TEST_FILEPATH_MAX_DEPTH];
FSFAT_DBGLOG("%s:entered\n", __func__);
/* find the dirs to create*/
memset(parts, 0, sizeof(parts));
len = strlen(filepath);
fpathbuf = (char *) malloc(len + 1);
if (fpathbuf == NULL) {
FSFAT_DBGLOG("%s: failed to duplicate string (out of memory)\n", __func__);
return ret;
}
memset(fpathbuf, 0, len + 1);
memcpy(fpathbuf, filepath, len);
num_parts = fsfat_filepath_split(fpathbuf, parts, FSFAT_FOPEN_TEST_FILEPATH_MAX_DEPTH);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to split filepath (filename=\"%s\", num_parts=%d)\n", __func__, filepath, (int) num_parts);
TEST_ASSERT_MESSAGE(num_parts > 0, fsfat_fopen_utest_msg_g);
/* Now create the directories on the directory path.
* Skip creating dir for "/sd" which must be present */
buf = (char *) malloc(strlen(filepath) + 1);
memset(buf, 0, strlen(filepath) + 1);
pos = sprintf(buf, "/%s", parts[0]);
for (i = 1; i < num_parts - 1; i++) {
pos += sprintf(buf + pos, "/%s", parts[i]);
FSFAT_DBGLOG("mkdir(%s)\n", buf);
ret = mkdir(buf, S_IRWXU | S_IRWXG | S_IROTH | S_IXOTH);
if (do_asserts == true) {
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create directory (filepath2=\"%s\", ret=%d, errno=%d)\n", __func__, buf, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
}
}
if (buf) {
free(buf);
}
if (fpathbuf) {
free(fpathbuf);
}
return ret;
}
/** @brief
* First and last test must format the SD card to FAT FS format:
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_00(const size_t call_count)
{
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
int32_t ret = -1;
fs.unmount();
ret = fs.format(&sd);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to format sdcard (ret=%d)\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
fs.mount(&sd);
return CaseNext;
}
/* FIX ME: errno not set correctly when error occurs. This indicates a problem with the implementation. */
/** @brief
* Basic fopen test which does the following:
* - creates file and writes some data to the value blob.
* - closes the newly created file.
* - opens the file (r-only)
* - reads the file data and checks its the same as the previously created data.
* - closes the opened file
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
static control_t fsfat_fopen_test_01(const size_t call_count)
{
char *read_buf;
int32_t ret = 0;
size_t len = 0;
fsfat_kv_data_t *node;
FILE *fp = NULL;
FSFAT_DBGLOG("%s:entered\n", __func__);
(void) call_count;
node = fsfat_fopen_test_01_kv_data;
/* remove file and directory from a previous failed test run, if present */
fsfat_filepath_remove_all((char *) node->filename);
/* create dirs */
ret = fsfat_filepath_make_dirs((char *) node->filename, true);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dirs for filename (filename=\"%s\")(ret=%d)\n", __func__, node->filename, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
FSFAT_DBGLOG("%s:About to create new file (filename=\"%s\", data=\"%s\")\n", __func__, node->filename, node->value);
fp = fopen(node->filename, "w+");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (filename=\"%s\", data=\"%s\")(ret=%d, errno=%d)\n", __func__, node->filename,
node->value, (int) ret, errno);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
FSFAT_DBGLOG("%s:length of file=%d (filename=\"%s\", data=\"%s\")\n", __func__, (int) len, node->filename, node->value);
len = strlen(node->value);
ret = fwrite((const void *) node->value, len, 1, fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to write file (filename=\"%s\", data=\"%s\")(ret=%d)\n", __func__, node->filename, node->value,
(int) ret);
TEST_ASSERT_MESSAGE(ret == 1, fsfat_fopen_utest_msg_g);
FSFAT_DBGLOG("Created file successfully (filename=\"%s\", data=\"%s\")\n", node->filename, node->value);
ret = fclose(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to close file (ret=%d, errno=%d)\n", __func__, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* now open the newly created key */
fp = NULL;
fp = fopen(node->filename, "r");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file for reading (filename=\"%s\", data=\"%s\")(ret=%d)\n", __func__, node->filename,
node->value, (int) ret);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
len = strlen(node->value) + 1;
read_buf = (char *) malloc(len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to allocated read buffer \n", __func__);
TEST_ASSERT_MESSAGE(read_buf != NULL, fsfat_fopen_utest_msg_g);
FSFAT_DBGLOG("Opened file successfully (filename=\"%s\", data=\"%s\")\n", node->filename, node->value);
memset(read_buf, 0, len);
ret = fread((void *) read_buf, len, 1, fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to read file (filename=\"%s\", data=\"%s\", read_buf=\"%s\", ret=%d)\n", __func__, node->filename,
node->value, read_buf, (int) ret);
/* FIX ME: fread should return the number of items read, not 0 when an item is read successfully.
* This indicates a problem with the implementation, as the correct data is read. The correct assert should be:
* TEST_ASSERT_MESSAGE(ret == 1, fsfat_fopen_utest_msg_g);
* The following assert is curerntly used until the implementation is fixed
*/
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* check read data is as expected */
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: read value data (%s) != expected value data (filename=\"%s\", data=\"%s\", read_buf=\"%s\", ret=%d)\n",
__func__, read_buf, node->filename, node->value, read_buf, (int) ret);
TEST_ASSERT_MESSAGE(strncmp(read_buf, node->value, strlen(node->value)) == 0, fsfat_fopen_utest_msg_g);
if (read_buf) {
free(read_buf);
}
ret = fclose(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: fclose() call failed (ret=%d, errno=%d).\n", __func__, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
static fsfat_kv_data_t fsfat_fopen_test_02_data[] = {
FSFAT_INIT_1_TABLE_MID_NODE,
{ NULL, NULL},
};
/**
* @brief test to fopen() a pre-existing key and try to write it, which should fail
* as by default pre-existing keys are opened read-only
*
* Basic open test which does the following:
* - creates file with default rw perms and writes some data to the value blob.
* - closes the newly created file.
* - opens the file with the default permissions (read-only)
* - tries to write the file data which should fail because file was not opened with write flag set.
* - closes the opened key
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_02(const size_t call_count)
{
int32_t ret = -1;
size_t len = 0;
FILE *fp = NULL;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
len = strlen(fsfat_fopen_test_02_data[0].value);
ret = fsfat_test_create(fsfat_fopen_test_02_data[0].filename, (char *) fsfat_fopen_test_02_data[0].value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
/* by default, owner of key opens with read-only permissions*/
fp = fopen(fsfat_fopen_test_02_data[0].filename, "r");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file (filename=\"%s\", ret=%d)\n", __func__, fsfat_fopen_test_02_data[0].filename, (int) ret);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
len = strlen(fsfat_fopen_test_02_data[0].value);
ret = fwrite((const void *) fsfat_fopen_test_02_data[0].value, len, 1, fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: call to fwrite() succeeded when should have failed for read-only file (filename=\"%s\")(ret=%d).\n",
__func__, fsfat_fopen_test_02_data[0].filename, (int) ret);
TEST_ASSERT_MESSAGE(ret <= 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE, "%s:Error: fclose() call failed.\n",
__func__);
TEST_ASSERT_MESSAGE(fclose(fp) == 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/**
* @brief test to fopen() a pre-existing file and try to write it, which should succeed
* because the key was opened read-write permissions explicitly
*
* Basic open test which does the following:
* - creates file with default rw perms and writes some data to the value blob.
* - closes the newly created file.
* - opens the file with the rw permissions (non default)
* - tries to write the file data which should succeeds because file was opened with write flag set.
* - closes the opened key
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_03(const size_t call_count)
{
int32_t ret = -1;
size_t len = 0;
FILE *fp = NULL;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
len = strlen(fsfat_fopen_test_02_data[0].value);
ret = fsfat_test_create(fsfat_fopen_test_02_data[0].filename, (char *) fsfat_fopen_test_02_data[0].value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file in store (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
/* opens with read-write permissions*/
fp = fopen(fsfat_fopen_test_02_data[0].filename, "w+");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file (filename=\"%s\")(ret=%d)\n", __func__, fsfat_fopen_test_02_data[0].filename, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
len = strlen(fsfat_fopen_test_02_data[0].value);
ret = fwrite((const void *) fsfat_fopen_test_02_data[0].value, len, 1, fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: call to fwrite() failed when should have succeeded (filename=\"%s\", ret=%d).\n", __func__,
fsfat_fopen_test_02_data[0].filename, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE, "%s:Error: fclose() call failed.\n",
__func__);
TEST_ASSERT_MESSAGE(fclose(fp) >= 0, fsfat_fopen_utest_msg_g);
/* clean-up */
ret = remove(fsfat_fopen_test_02_data[0].filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unable to delete file (filename=%s, ret=%d) .\n", __func__, fsfat_fopen_test_02_data[0].filename, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/** @brief test to call fopen() with a filename string that exceeds the maximum length
* - chanFS supports the exFAT format which should support 255 char filenames
* - check that filenames of this length can be created
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_04(const size_t call_count)
{
char filename_good[FSFAT_FILENAME_MAX_LENGTH + 1];
char filename_bad[FSFAT_FILENAME_MAX_LENGTH + 2];
int32_t ret = -1;
size_t len = 0;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
memset(filename_good, 0, FSFAT_FILENAME_MAX_LENGTH + 1);
memset(filename_bad, 0, FSFAT_FILENAME_MAX_LENGTH + 2);
ret = fsfat_test_filename_gen(filename_good, FSFAT_FILENAME_MAX_LENGTH);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unable to generate filename_good.\n", __func__);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: filename_good is not the correct length (filename_good=%s, len=%d, expected=%d).\n", __func__, filename_good,
(int) strlen(filename_good), (int) FSFAT_FILENAME_MAX_LENGTH);
TEST_ASSERT_MESSAGE(strlen(filename_good) == FSFAT_FILENAME_MAX_LENGTH, fsfat_fopen_utest_msg_g);
ret = fsfat_test_filename_gen(filename_bad, FSFAT_FILENAME_MAX_LENGTH + 1);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unable to generate filename_bad.\n", __func__);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: filename_bad is not the correct length (len=%d, expected=%d).\n", __func__, (int) strlen(filename_bad),
(int) FSFAT_FILENAME_MAX_LENGTH + 1);
TEST_ASSERT_MESSAGE(strlen(filename_bad) == FSFAT_FILENAME_MAX_LENGTH + 1, fsfat_fopen_utest_msg_g);
len = strlen(filename_good);
ret = fsfat_test_create(filename_good, filename_good, len);
/* FIXME:
* The current implementation can create file with a filename with 9 chars (more than the 8 restriction of FAT32 Short File Names).
* However, the exFAT 255 char filesnames is not supported and hence the following is commented out. Find out what is
* the supported max filename length and change this testcase according.
*
* FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE, "%s:Error: failed to create file (filename=%s, ret=%d).\n", __func__, filename_good, (int) ret);
* TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
*/
len = strlen(filename_bad);
ret = fsfat_test_create(filename_bad, filename_bad, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: created file in store for filename_bad when should have failed (filename=%s, ret=%d).\n", __func__,
filename_bad, (int) ret);
TEST_ASSERT_MESSAGE(ret < 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/// @cond FSFAT_DOXYGEN_DISABLE
typedef struct fsfat_fopen_kv_name_ascii_node {
uint32_t code;
uint32_t f_allowed : 1;
} fsfat_fopen_kv_name_ascii_node;
/// @endcond
static const uint32_t fsfat_fopen_kv_name_ascii_table_code_sentinel_g = 256;
/*@brief table recording ascii character codes permitted in kv names */
static fsfat_fopen_kv_name_ascii_node fsfat_fopen_kv_name_ascii_table[] = {
{0, true}, /* code 0-33 allowed*/
{34, false}, /* '"' not allowed */
{35, true}, /* allowed */
{42, false}, /* '*' not allowed */
{43, true}, /* allowed */
{47, false}, /* '/' not allowed */
{48, true}, /* allowed */
{58, false}, /* ':' not allowed */
{59, true}, /* allowed */
{60, false}, /* '<' not allowed */
{61, true}, /* allowed */
{62, false}, /* '?', '>' not allowed */
{64, true}, /* allowed */
{92, false}, /* '\' not allowed */
{93, true}, /* allowed */
{124, false}, /* '!' not allowed */
{125, true}, /* allowed */
{127, false}, /* DEL not allowed */
{128, true}, /* allowed */
{fsfat_fopen_kv_name_ascii_table_code_sentinel_g, false}, /* sentinel */
};
/// @cond FSFAT_DOXYGEN_DISABLE
enum fsfat_fopen_kv_name_pos {
fsfat_fopen_kv_name_pos_start = 0x0,
fsfat_fopen_kv_name_pos_mid,
fsfat_fopen_kv_name_pos_end,
fsfat_fopen_kv_name_pos_max
};
/// @endcond
/** @brief test to call fopen() with filename that in includes illegal characters
* - the character(s) can be at the beginning of the filename
* - the character(s) can be at the end of the filename
* - the character(s) can be somewhere within the filename string
* - a max-length string of random characters (legal and illegal)
* - a max-length string of random illegal characters only
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_05(const size_t call_count)
{
bool f_allowed = false;
const char *mnt_pt = FSFAT_FOPEN_TEST_MOUNT_PT_PATH;
const char *basename = "goodfile";
const char *extname = "txt";
const size_t basename_len = strlen(basename);
const size_t filename_len = strlen(mnt_pt) + strlen(basename) + strlen(extname) +
2; /* extra 2 chars for '/' and '.' in "/sd/goodfile.txt" */
char filename[FSFAT_BUF_MAX_LENGTH];
size_t len = 0;
uint32_t j = 0;
int32_t ret = 0;
fsfat_fopen_kv_name_ascii_node *node = NULL;
uint32_t pos;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
#ifdef FSFAT_DEBUG
/* symbol only used why debug is enabled */
const char *pos_str = NULL;
#endif
/* create bad keyname strings with invalid character code at start of keyname */
node = fsfat_fopen_kv_name_ascii_table;
memset(filename, 0, FSFAT_BUF_MAX_LENGTH);
while (node->code != fsfat_fopen_kv_name_ascii_table_code_sentinel_g) {
/* loop over range */
for (j = node->code; j < (node + 1)->code; j++) {
if ((j >= 48 && j <= 57) || (j >= 65 && j <= 90) || (j >= 97 && j <= 122)) {
FSFAT_DBGLOG("%s: skipping alpha-numeric ascii character code %d (%c).\n", __func__, (int) j, (char) j);
continue;
}
/* set the start, mid, last character of the name to the test char code */
for (pos = (uint32_t) fsfat_fopen_kv_name_pos_start; pos < (uint32_t) fsfat_fopen_kv_name_pos_max; pos++) {
len = snprintf(filename, filename_len + 1, "%s/%s.%s", mnt_pt, basename, extname);
/* overwrite a char at the pos start, mid, end of the filename with an ascii char code (both illegal and legal)*/
switch (pos) {
case fsfat_fopen_kv_name_pos_start:
filename[5] = (char) j; /* 5 so at to write the second basename char (bad chars as first char not accepted)*/
break;
case fsfat_fopen_kv_name_pos_mid:
/* create bad keyname strings with invalid character code in the middle of keyname */
filename[5 + basename_len / 2] = (char) j;
break;
case fsfat_fopen_kv_name_pos_end:
/* create bad keyname strings with invalid character code at end of keyname */
filename[5 + basename_len - 1] = (char) j;
break;
default:
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unexpected value of pos (pos=%d).\n", __func__, (int) pos);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
break;
}
#ifdef FSFAT_DEBUG
/* processing only required when debug trace enabled */
switch (pos) {
case fsfat_fopen_kv_name_pos_start:
pos_str = "start";
break;
case fsfat_fopen_kv_name_pos_mid:
pos_str = "middle";
break;
case fsfat_fopen_kv_name_pos_end:
pos_str = "end";
break;
default:
break;
}
#endif
ret = fsfat_test_create(filename, (const char *) filename, len);
/* special cases */
switch (j) {
//case 0 :
//case 46 :
// switch(pos)
// {
// /* for code = 0 (null terminator). permitted at mid and end of string */
// /* for code = 46 ('.'). permitted at mid and end of string but not at start */
// case fsfat_fopen_kv_name_pos_start:
// f_allowed = false;
// break;
// case fsfat_fopen_kv_name_pos_mid:
// case fsfat_fopen_kv_name_pos_end:
// default:
// f_allowed = true;
// break;
// }
// break;
default:
f_allowed = node->f_allowed;
break;
}
if (f_allowed == true) {
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file in store when filename contains valid characters (code=%d, ret=%d).\n", __func__,
(int) j, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
/* revert FSFAT_LOG for more trace */
FSFAT_DBGLOG("Successfully created a file with valid keyname containing ascii character code %d (%c) at the %s of the keyname.\n",
(int) j, (int) j, pos_str);
FSFAT_LOG("%c", '.');
ret = fsfat_test_delete(filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to delete file previously created (code=%d, ret=%d).\n", __func__, (int) j, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
} else {
/*node->f_allowed == false => not allowed to create kv name with ascii code */
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: created file in store when filename contains an invalid character (code=%d, ret=%d).\n", __func__, (int) j,
(int) ret);
TEST_ASSERT_MESSAGE(ret < 0, fsfat_fopen_utest_msg_g);
/* revert FSFAT_LOG for more trace */
FSFAT_DBGLOG("Successfully failed to create a file with an invalid keyname containing ascii character code %d at the %s of the keyname.\n",
(int) j, pos_str);
FSFAT_LOG("%c", '.');
}
}
}
node++;
}
FSFAT_LOG("%c", '\n');
return CaseNext;
}
static const char fsfat_fopen_ascii_illegal_buf_g[] = "\"�'*+,./:;<=>?[\\]|";
/** @brief test to call fopen() with filename that in includes
* illegal characters
* - a max-length string of random illegal characters only
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_06(const size_t call_count)
{
const char *mnt_pt = FSFAT_FOPEN_TEST_MOUNT_PT_PATH;
const char *extname = "txt";
const size_t filename_len = strlen(mnt_pt) + FSFAT_MAX_FILE_BASENAME + strlen(extname) +
2; /* extra 2 chars for '/' and '.' in "/sd/goodfile.txt" */
char filename[FSFAT_BUF_MAX_LENGTH];
int32_t i = 0;
int32_t j = 0;
uint32_t pos = 0;
uint32_t len = 0;
int32_t ret = -1;
size_t buf_data_max = 0;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
memset(filename, 0, FSFAT_BUF_MAX_LENGTH);
/* create bad keyname strings with invalid character code at start of keyname */
buf_data_max = strlen(fsfat_fopen_ascii_illegal_buf_g);
/* generate a number of illegal filenames */
for (j = 0; i < FSFAT_MAX_FILE_BASENAME; j++) {
/* generate a kv name of illegal chars*/
len = snprintf(filename, filename_len + 1, "%s/", mnt_pt);
for (i = 0; i < FSFAT_MAX_FILE_BASENAME; i++) {
pos = rand() % (buf_data_max + 1);
len += snprintf(filename + len, filename_len + 1, "%c", fsfat_fopen_ascii_illegal_buf_g[pos]);
}
len += snprintf(filename + len, filename_len + 1, ".%s", extname);
ret = fsfat_test_create(filename, filename, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: created file when filename contains invalid characters (filename=%s, ret=%d).\n", __func__, filename,
(int) ret);
TEST_ASSERT_MESSAGE(ret < 0, fsfat_fopen_utest_msg_g);
}
return CaseNext;
}
/** @brief test for errno reporting on a failed fopen()call
*
* This test does the following:
* - tries to open a file that does not exist for reading, and checks that a NULL pointer is returned.
* - checks that errno is not 0 as there is an error.
* - checks that ferror() returns 1 indicating an error exists.
*
* Note: see NOTE_1 below.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_07(const size_t call_count)
{
FILE *f = NULL;
int ret = -1;
int errno_val = 0;
const char *filename = sd_badfile_path;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
errno = 0;
/* this is expect to fail as the file doesnt exist */
f = fopen(filename, "r");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: opened non-existent file for reading (filename=%s, f=%p).\n", __func__, filename, f);
TEST_ASSERT_MESSAGE(f == NULL, fsfat_fopen_utest_msg_g);
/* check errno is set correctly */
#if ! defined(__ARMCC_VERSION) && defined(__GNUC__)
/* Store errno so the current value set is not changed by new function call */
errno_val = errno;
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: errno has unexpected value (errno != 0 expected) (filename=%s, errno=%d).\n", __func__, filename, errno);
TEST_ASSERT_MESSAGE(errno_val != 0, fsfat_fopen_utest_msg_g);
#endif /* ! defined(__ARMCC_VERSION) && defined(__GNUC__) */
return CaseNext;
}
/** @brief test for operation of clearerr() and ferror()
*
* The test does the following:
* - opens and then closes a file, but keeps a copy of the FILE pointer fp.
* - set errno to 0.
* - write to the close file with fwrite(fp) which should return 0 (no writes) and set the errno.
* - check the error condition is set with ferror().
* - clear the error with clearerr().
* - check the error condition is reset with ferror().
*
* NOTE_1: GCC/ARMCC support for setting errno
* - Documentation (e.g. fwrite() man page) does not explicity say fwrite() sets errno
* (e.g. for an fwrite() on a read-only file).
* - GCC libc fwrite() appears to set errno as expected.
* - ARMCC & IAR libc fwrite() appears not to set errno.
*
* The following ARMCC documents are silent on whether fwrite() sets errno:
* - "ARM C and C++ Libraries and Floating-Point Support".
* - "RL-ARM User Guide fwrite() section".
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_08(const size_t call_count)
{
FILE *fp = NULL;
int ret = -1;
int ret_ferror = -1;
const char *filename = sd_testfile_path;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
errno = 0;
fp = fopen(filename, "w+");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file (filename=%s, f=%p).\n", __func__, filename, fp);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
/* close the fp but then try to read or write it */
ret = fclose(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to close file (ret=%d, errno=%d)\n", __func__, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* open file */
errno = 0;
fp = fopen(filename, "r");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file for reading (filename=\"%s\", ret=%d)\n", __func__, filename, (int) ret);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
/* Perform fwrite() operation that will fail. */
errno = 0;
ret = fwrite("42!", 4, 1, fp);
ret_ferror = ferror(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: ferror() failed to report error (filename=%s, ret_ferror=%d).\n", __func__, filename, (int) ret_ferror);
TEST_ASSERT_MESSAGE(ret_ferror != 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: fwrite successfully wrote to read-only file (filename=%s, ret=%d).\n", __func__, filename, (int) ret);
/* the fwrite() should fail and return 0. */
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
#if ! defined(__ARMCC_VERSION) && defined(__GNUC__)
/* check that errno is set. ARMCC appears not to set errno for fwrite() failure. */
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unexpected zero value for errno (filename=%s, ret=%d, errno=%d).\n", __func__, filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(errno != 0, fsfat_fopen_utest_msg_g);
/* check that errno is set to the expected value (this may change differ for different libc's) */
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: errno != EBADF (filename=%s, ret=%d, errno=%d).\n", __func__, filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(errno == EBADF, fsfat_fopen_utest_msg_g);
#endif /* ! defined(__ARMCC_VERSION) && defined(__GNUC__) */
/* check clearerr() return clears the error */
clearerr(fp);
ret = ferror(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: ferror() did not return zero value when error has been cleared (filename=%s, ret=%d).\n", __func__, filename,
(int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
fclose(fp);
return CaseNext;
}
/** @brief test for operation of ftell()
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_09(const size_t call_count)
{
FILE *fp = NULL;
int ret = -1;
int32_t len = 0;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
/* create a file of a certain length */
len = strlen(fsfat_fopen_test_02_data[0].value);
ret = fsfat_test_create(fsfat_fopen_test_02_data[0].filename, (char *) fsfat_fopen_test_02_data[0].value, len);
errno = 0;
/* Open the file for reading so the file is not truncated to 0 length. */
fp = fopen(fsfat_fopen_test_02_data[0].filename, "r");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to open file (filename=%s, fp=%p, errno=%d).\n", __func__, fsfat_fopen_test_02_data[0].filename, fp,
errno);
TEST_ASSERT_MESSAGE(fp != NULL, fsfat_fopen_utest_msg_g);
errno = 0;
ret = fseek(fp, 0, SEEK_END);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: fseek() failed to SEEK_END (filename=%s, ret=%d, errno=%d).\n", __func__,
fsfat_fopen_test_02_data[0].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
errno = 0;
ret = ftell(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: ftell() failed to report correct offset value (filename=%s, ret=%d, errno=%d).\n", __func__,
fsfat_fopen_test_02_data[0].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == len, fsfat_fopen_utest_msg_g);
errno = 0;
ret = fclose(fp);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to close file (ret=%d, errno=%d)\n", __func__, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/* file data for test_10 */
static fsfat_kv_data_t fsfat_fopen_test_10_kv_data[] = {
{ "/sd/test_10/testfile.txt", "test_data"},
{ NULL, NULL},
};
/** @brief test for operation of remove()
*
* Performs the following tests:
* 1. test remove() on a file that exists. This should succeed.
* 2. test remove() on a dir that exists. This should succeed.
* 3. test remove() on a file that doesnt exist. This should fail. check errno set.
* 4. test remove() on a dir that doesnt exist. This should fail. check errno set.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_10(const size_t call_count)
{
char buf[FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1];
char *pos = NULL;
int32_t ret = -1;
size_t len = 0;
fsfat_kv_data_t *node = fsfat_fopen_test_10_kv_data;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
TEST_ASSERT(strlen(node->filename) < FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
/* start from a known state i.e. directory to be created in not present */
fsfat_filepath_remove_all((char *) node->filename);
/* (1) */
errno = 0;
ret = fsfat_filepath_make_dirs((char *) node->filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, node->filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
len = strlen(node->value);
ret = fsfat_test_create(node->filename, (char *) node->value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
ret = remove(node->filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: delete file operation failed (filename=%s, ret=%d) .\n", __func__, node->filename, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* (3) */
ret = remove(node->filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: deleted a file that doesn't exist (filename=%s, ret=%d, errno=%d) .\n", __func__, node->filename, (int) ret,
errno);
TEST_ASSERT_MESSAGE(ret != 0, fsfat_fopen_utest_msg_g);
/* (2) */
memset(buf, 0, FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
memcpy(buf, node->filename, strlen(node->filename));
pos = strrchr(buf, '/');
*pos = '\0';
ret = remove(buf);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: delete directory operation failed (directory name=%s, ret=%d, errno=%d).\n", __func__, buf, (int) ret,
errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* (4) */
ret = remove(buf);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: deleted a directory that doesn't exist (directory name=%s, ret=%d, errno=%d).\n", __func__, buf, (int) ret,
errno);
TEST_ASSERT_MESSAGE(ret != 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/* file data for test_11 */
static fsfat_kv_data_t fsfat_fopen_test_11_kv_data[] = {
{ "/sd/test_11/step0.txt", "test_data"},
{ "/sd/test_11/step1.txt", "test_data"},
{ "/sd/test_11/subdir/step3.txt", "test_data"},
{ NULL, NULL},
};
/** @brief test for operation of rename()
*
* This test does the following:
* 1) test rename() on a file that exists to a new filename within the same directory.
* 2) test rename() on a file that exists to a new filename within a different directory.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_11(const size_t call_count)
{
int32_t ret = -1;
size_t len = 0;
fsfat_kv_data_t *node = fsfat_fopen_test_11_kv_data;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
TEST_ASSERT(strlen(node->filename) < FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
/* start from a known state i.e. directory to be created in not present, files not present */
while (node->filename != NULL) {
fsfat_filepath_remove_all((char *) node->filename);
node++;
}
/* create file and directories ready for rename() tests */
errno = 0;
node = fsfat_fopen_test_11_kv_data;
ret = fsfat_filepath_make_dirs((char *) node->filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, node->filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
len = strlen(node->value);
ret = fsfat_test_create(node->filename, (char *) node->value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
errno = 0;
node = &fsfat_fopen_test_11_kv_data[2];
ret = fsfat_filepath_make_dirs((char *) node->filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, node->filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* (1) */
ret = rename(fsfat_fopen_test_11_kv_data[0].filename, fsfat_fopen_test_11_kv_data[1].filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unable to rename file from (%s) to (%s) (ret=%d, errno=%d).\n", __func__,
fsfat_fopen_test_11_kv_data[0].filename, fsfat_fopen_test_11_kv_data[1].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* (2) */
ret = rename(fsfat_fopen_test_11_kv_data[1].filename, fsfat_fopen_test_11_kv_data[2].filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unable to rename file from (%s) to (%s) (ret=%d, errno=%d).\n", __func__,
fsfat_fopen_test_11_kv_data[1].filename, fsfat_fopen_test_11_kv_data[2].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/* file data for test_12 */
static fsfat_kv_data_t fsfat_fopen_test_12_kv_data[] = {
{ "/sd/test_12/subdir/testfil1.txt", "testfil1.txt"},
{ "/sd/test_12/testfil2.txt", "testfil2.txt"},
{ "/sd/test_12/testfil3.txt", "testfil3.txt"},
{ "/sd/test_12/testfil4.txt", "testfil4.txt"},
{ "/sd/test_12/testfil5.txt", "testfil5.txt"},
{ NULL, NULL},
};
/** @brief test for operation of readdir().
*
* Note, rewinddir(), telldir() and seekdir() dont appear to work reliably.
* opendir() not available on ARM/IAR toolchains.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_12(const size_t call_count)
{
char buf[FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1];
char *pos = NULL;
int32_t count = 0;
int32_t ret = -1;
size_t len = 0;
DIR *dir;
struct dirent *dp;
fsfat_kv_data_t *node = fsfat_fopen_test_12_kv_data;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
#if ! defined(__ARMCC_VERSION) && defined(__GNUC__)
/* start from a known state i.e. directory to be created in not present */
while (node->filename != NULL) {
fsfat_filepath_remove_all((char *) node->filename);
node++;
}
/* create a file */
node = fsfat_fopen_test_12_kv_data;
errno = 0;
ret = fsfat_filepath_make_dirs((char *) node->filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, node->filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
node = fsfat_fopen_test_12_kv_data;
while (node->filename != NULL) {
len = strlen(node->value);
ret = fsfat_test_create(node->filename, (char *) node->value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
node++;
}
node = fsfat_fopen_test_12_kv_data;
memset(buf, 0, FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
memcpy(buf, node->filename, strlen(node->filename));
pos = strrchr(buf, '/');
*pos = '\0';
dir = opendir(buf);
while ((dp = readdir(dir)) != NULL) {
FSFAT_DBGLOG("%s: filename: \"%s\"\n", __func__, dp->d_name);
TEST_ASSERT_MESSAGE(dp != 0, "Error: readdir() failed\n");
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unexpected object name (name=%s, expected=%s).\n", __func__, dp->d_name,
fsfat_fopen_test_12_kv_data[count].value);
TEST_ASSERT_MESSAGE(strncmp(dp->d_name, fsfat_fopen_test_12_kv_data[count].value,
strlen(fsfat_fopen_test_12_kv_data[count].value)) == 0, fsfat_fopen_utest_msg_g);
count++;
}
closedir(dir);
/* cleanup */
node = fsfat_fopen_test_12_kv_data;
while (node->filename != NULL) {
fsfat_filepath_remove_all((char *) node->filename);
node++;
}
#endif /* ! defined(__ARMCC_VERSION) && defined(__GNUC__) */
return CaseNext;
}
/* file data for test_13 */
static fsfat_kv_data_t fsfat_fopen_test_13_kv_data[] = {
/* a file is included in the filepath even though its not created by the test,
* as the fsfat_filepath_make_dirs() works with it present. */
{ "/sd/test_13/dummy.txt", "testdir"},
{ NULL, NULL},
};
/** @brief test for operation of mkdir()/remove()
*
* This test checks that:
* - The mkdir() function successfully creates a directory that is not already present.
* - The mkdir() function returns EEXIST when trying to create a directory thats already present.
* - The remove() function successfully removes a directory that is present.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_13(const size_t call_count)
{
int32_t ret = 0;
FSFAT_DBGLOG("%s:entered\n", __func__);
(void) call_count;
/* start from a known state i.e. directory to be created in not present */
fsfat_filepath_remove_all((char *) fsfat_fopen_test_13_kv_data[0].filename);
errno = 0;
ret = fsfat_filepath_make_dirs((char *) fsfat_fopen_test_13_kv_data[0].filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, fsfat_fopen_test_13_kv_data[0].filename,
(int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
/* check that get a suitable error when try to create it again.*/
errno = 0;
ret = fsfat_filepath_make_dirs((char *) fsfat_fopen_test_13_kv_data[0].filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: permitted to create directory when already exists (dirname=%s, ret=%d, errno=%d)\n", __func__,
fsfat_fopen_test_13_kv_data[0].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret != 0, fsfat_fopen_utest_msg_g);
/* check errno is as expected */
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: errno != EEXIST (dirname=%s, ret=%d, errno=%d)\n", __func__, fsfat_fopen_test_13_kv_data[0].filename,
(int) ret, errno);
TEST_ASSERT_MESSAGE(errno == EEXIST, fsfat_fopen_utest_msg_g);
ret = fsfat_filepath_remove_all((char *) fsfat_fopen_test_13_kv_data[0].filename);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to remove directory (dirname=%s, ret=%d, errno=%d)\n", __func__,
fsfat_fopen_test_13_kv_data[0].filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
return CaseNext;
}
/* file data for test_14 */
static fsfat_kv_data_t fsfat_fopen_test_14_kv_data[] = {
/* a file is included in the filepath even though its not created by the test,
* as the fsfat_filepath_make_dirs() works with it present. */
{ "/sd/test_14/testfile.txt", "testdata"},
{ NULL, NULL},
};
/** @brief test for operation of stat()
*
* stat() is currently no supported by ARMCC and IAR toolchains libc.
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_14(const size_t call_count)
{
#if ! defined(__ARMCC_VERSION) && defined(__GNUC__)
char buf[FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1];
char *pos = NULL;
int32_t ret = -1;
size_t len = 0;
struct stat file_stat;
fsfat_kv_data_t *node = fsfat_fopen_test_14_kv_data;
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
TEST_ASSERT(strlen(node->filename) < FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
/* start from a known state i.e. directory to be created in not present */
fsfat_filepath_remove_all((char *) node->filename);
/* Create file in a directory. */
errno = 0;
ret = fsfat_filepath_make_dirs((char *) node->filename, false);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dir (dirname=%s, ret=%d, errno=%d)\n", __func__, node->filename, (int) ret, errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
len = strlen(node->value);
ret = fsfat_test_create(node->filename, (char *) node->value, len);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create file (ret=%d).\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret >= 0, fsfat_fopen_utest_msg_g);
/* Test stat() on the file returns the correct attribute set */
memset(&file_stat, 0, sizeof(file_stat));
ret = stat(node->filename, &file_stat);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: stat() operation on file failed (filename=%s, ret=%d, errno=%d).\n", __func__, node->filename, (int) ret,
errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: expected st_mode S_IFREG flag not set (filename=%s).\n", __func__, node->filename);
TEST_ASSERT_MESSAGE((file_stat.st_mode & S_IFREG) == S_IFREG, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unexpected st_mode S_IFDIR flag set (filename=%s).\n", __func__, node->filename);
TEST_ASSERT_MESSAGE((file_stat.st_mode & S_IFDIR) != S_IFDIR, fsfat_fopen_utest_msg_g);
/* Test stat() on the directory returns the correct attribute set */
memset(&file_stat, 0, sizeof(file_stat));
memset(buf, 0, FSFAT_FOPEN_TEST_WORK_BUF_SIZE_1);
memcpy(buf, node->filename, strlen(node->filename));
pos = strrchr(buf, '/');
*pos = '\0';
ret = stat(buf, &file_stat);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: stat() operation on directory failed (directory name=%s, ret=%d, errno=%d).\n", __func__, buf, (int) ret,
errno);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: unexpected st_mode S_IFREG flag set (directory name=%s).\n", __func__, buf);
TEST_ASSERT_MESSAGE((file_stat.st_mode & S_IFREG) != S_IFREG, fsfat_fopen_utest_msg_g);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: expected st_mode S_IFDIR flag not set (directory name=%s).\n", __func__, buf);
TEST_ASSERT_MESSAGE((file_stat.st_mode & S_IFDIR) == S_IFDIR, fsfat_fopen_utest_msg_g);
/* clean up after successful test */
fsfat_filepath_remove_all((char *) node->filename);
#endif /* ! defined(__ARMCC_VERSION) && defined(__GNUC__) */
return CaseNext;
}
/** @brief test for operation of SDFileSystem::format()
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_15(const size_t call_count)
{
FSFAT_FENTRYLOG("%s:entered\n", __func__);
(void) call_count;
int32_t ret = -1;
/* the allocation_unit of 0 means chanFS will use the default for the card (varies according to capacity). */
fs.unmount();
ret = fs.format(&sd);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to format sdcard (ret=%d)\n", __func__, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
fs.mount(&sd);
return CaseNext;
}
/* @brief test utility function to create a file of a given size.
*
* A reference data table is used of so that the data file can be later be
* checked with fsfat_test_check_data_file().
*
* @param filename name of the file including path
* @param data data to store in file
* @param len number of bytes of data present in the data buffer.
*/
int32_t fsfat_test_create_data_file(const char *filename, size_t len)
{
int32_t ret = -1;
FILE *fp = NULL;
size_t write_len = 0;
size_t written_len = 0;
int32_t exp = 0;
const int32_t exp_max = 8; /* so as not to exceed FSFAT_TEST_BYTE_DATA_TABLE_SIZE/2 */
FSFAT_FENTRYLOG("%s:entered (filename=%s, len=%d).\n", __func__, filename, (int) len);
TEST_ASSERT(len % FSFAT_TEST_BYTE_DATA_TABLE_SIZE == 0);
fp = fopen(filename, "a");
if (fp == NULL) {
return ret;
}
while (written_len < len) {
/* write fsfat_test_byte_data_table or part thereof, in 9 writes of sizes
* 1, 2, 4, 8, 16, 32, 64, 128, 1, totalling 256 bytes len permitting. */
for (exp = 0; (exp <= exp_max) && (written_len < len); exp++) {
write_len = 0x1 << (exp % exp_max);
write_len = len - written_len > write_len ? write_len : len - written_len;
ret = fwrite((const void *) &fsfat_test_byte_data_table[written_len % FSFAT_TEST_BYTE_DATA_TABLE_SIZE], write_len, 1,
fp);
written_len += write_len;
if (ret != 1) {
FSFAT_DBGLOG("%s:Error: fwrite() failed (ret=%d)\n", __func__, (int) ret);
ret = -1;
goto out0;
}
}
}
if (written_len == len) {
ret = 0;
} else {
ret = -1;
}
out0:
fclose(fp);
return ret;
}
/* @brief test utility function to check the data in the specified file is correct.
*
* The data read from the file is check that it agrees with the data written by
* fsfat_test_create_data_file().
*
* @param filename name of the file including path
* @param data data to store in file
* @param len number of bytes of data present in the data buffer.
*/
int32_t fsfat_test_check_data_file(const char *filename, size_t len)
{
int32_t ret = -1;
FILE *fp = NULL;
size_t read_len = 0;
uint8_t buf[FSFAT_TEST_BYTE_DATA_TABLE_SIZE];
FSFAT_FENTRYLOG("%s:entered (filename=%s, len=%d).\n", __func__, filename, (int) len);
TEST_ASSERT(len % FSFAT_TEST_BYTE_DATA_TABLE_SIZE == 0);
fp = fopen(filename, "r");
if (fp == NULL) {
return ret;
}
while (read_len < len) {
ret = fread((void *) buf, FSFAT_TEST_BYTE_DATA_TABLE_SIZE, 1, fp);
read_len += FSFAT_TEST_BYTE_DATA_TABLE_SIZE;
if (ret == 0) {
/* end of read*/
FSFAT_DBGLOG("%s:unable to read data\n", __func__);
break;
}
if (memcmp(buf, fsfat_test_byte_data_table, FSFAT_TEST_BYTE_DATA_TABLE_SIZE) != 0) {
FSFAT_DBGLOG("%s:Error: read data not as expected (0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x, 0x%2x\n",
__func__,
buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7], buf[8], buf[9], buf[10], buf[11], buf[12], buf[13],
buf[14], buf[15]);
ret = -1;
goto out0;
}
}
if (read_len == len) {
ret = 0;
}
out0:
fclose(fp);
return ret;
}
/* file data for test_16 */
static fsfat_kv_data_t fsfat_fopen_test_16_kv_data[] = {
{ "/sd/tst16_0/testfil0.txt", "dummy_data"},
{ "/sd/tst16_1/subdir0/testfil0.txt", "dummy_data"},
{ "/sd/tst16_2/subdir0/subdir1/testfil0.txt", "dummy_data"},
{ "/sd/tst16_3/subdir0/subdir1/subdir2/subdir3/testfil0.txt", "dummy_data"},
{ "/sd/tst16_4/subdir0/subdir1/subdir2/subdir3/subdir4/testfil0.txt", "dummy_data"},
{ "/sd/tst16_5/subdir0/subdir1/subdir2/subdir3/subdir4/subdir5/testfil0.txt", "dummy_data"},
{ "/sd/tst16_6/subdir0/subdir1/subdir2/subdir3/subdir4/subdir5/subdir6/testfil0.txt", "dummy_data"},
{ "/sd/tst16_7/subdir0/subdir1/subdir2/subdir3/subdir4/subdir5/subdir6/subdir7/testfil0.txt", "dummy_data"},
{ "/sd/tst16_8/subdir0/subdir1/subdir2/subdir3/subdir4/subdir5/subdir6/subdir7/subdir8/testfil0.txt", "dummy_data"},
{ "/sd/tst16_9/subdir0/subdir1/subdir2/subdir3/subdir4/subdir5/subdir6/subdir7/subdir8/subdir9/testfil0.txt", "dummy_data"},
{ NULL, NULL},
};
/** @brief stress test to write data to fs
*
* @return on success returns CaseNext to continue to next test case, otherwise will assert on errors.
*/
control_t fsfat_fopen_test_16(const size_t call_count)
{
int32_t ret = 0;
fsfat_kv_data_t *node = fsfat_fopen_test_16_kv_data;
const int32_t num_blocks = 100; /* each file ~25kB */
FSFAT_DBGLOG("%s:entered\n", __func__);
(void) call_count;
/* remove file and directory from a previous failed test run, if present */
while (node->filename != NULL) {
fsfat_filepath_remove_all((char *) node->filename);
node++;
}
/* create dirs */
node = fsfat_fopen_test_16_kv_data;
while (node->filename != NULL) {
ret = fsfat_filepath_make_dirs((char *) node->filename, true);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create dirs for filename (filename=\"%s\")(ret=%d)\n", __func__, node->filename, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
node++;
}
/* create the data files */
node = fsfat_fopen_test_16_kv_data;
while (node->filename != NULL) {
ret = fsfat_test_create_data_file(node->filename, num_blocks * FSFAT_TEST_BYTE_DATA_TABLE_SIZE);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to create data file (filename=\"%s\")(ret=%d)\n", __func__, node->filename, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
node++;
}
/* read the data back and check its as expected */
node = fsfat_fopen_test_16_kv_data;
while (node->filename != NULL) {
ret = fsfat_test_check_data_file(node->filename, num_blocks * FSFAT_TEST_BYTE_DATA_TABLE_SIZE);
FSFAT_TEST_UTEST_MESSAGE(fsfat_fopen_utest_msg_g, FSFAT_UTEST_MSG_BUF_SIZE,
"%s:Error: failed to check data file (filename=\"%s\")(ret=%d)\n", __func__, node->filename, (int) ret);
TEST_ASSERT_MESSAGE(ret == 0, fsfat_fopen_utest_msg_g);
node++;
}
/* clean up */
node = fsfat_fopen_test_16_kv_data;
while (node->filename != NULL) {
fsfat_filepath_remove_all((char *) node->filename);
node++;
}
return CaseNext;
}
#else
#define FSFAT_FOPEN_TEST_00 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_01 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_02 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_03 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_04 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_05 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_06 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_07 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_08 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_09 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_10 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_11 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_12 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_13 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_14 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_15 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_16 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_17 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_18 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_19 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_20 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_21 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_22 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_23 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_24 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_25 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_26 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_27 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_28 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_29 fsfat_fopen_test_dummy
#define FSFAT_FOPEN_TEST_30 fsfat_fopen_test_dummy
/** @brief fsfat_fopen_test_dummy Dummy test case for testing when platform doesnt have an SDCard installed.
*
* @return success always
*/
static control_t fsfat_fopen_test_dummy()
{
printf("Null test\n");
return CaseNext;
}
#endif
/// @cond FSFAT_DOXYGEN_DISABLE
utest::v1::status_t greentea_setup(const size_t number_of_cases)
{
GREENTEA_SETUP(FSFAT_FOPEN_GREENTEA_TIMEOUT_S, "default_auto");
return greentea_test_setup_handler(number_of_cases);
}
Case cases[] = {
/* 1 2 3 4 5 6 7 */
/* 1234567890123456789012345678901234567890123456789012345678901234567890 */
Case("FSFAT_FOPEN_TEST_00: format sd card to FAT FS.", FSFAT_FOPEN_TEST_00),
Case("FSFAT_FOPEN_TEST_01: fopen()/fwrite()/fclose() directories/file in multi-dir filepath.", FSFAT_FOPEN_TEST_01),
Case("FSFAT_FOPEN_TEST_02: fopen(r) pre-existing file try to write it.", FSFAT_FOPEN_TEST_02),
Case("FSFAT_FOPEN_TEST_03: fopen(w+) pre-existing file try to write it.", FSFAT_FOPEN_TEST_03),
Case("FSFAT_FOPEN_TEST_04: fopen() with a filename exceeding the maximum length.", FSFAT_FOPEN_TEST_04),
#ifdef FOPEN_EXTENDED_TESTING
Case("FSFAT_FOPEN_TEST_05: fopen() with bad filenames (extended).", FSFAT_FOPEN_TEST_05),
#endif
Case("FSFAT_FOPEN_TEST_06: fopen() with bad filenames (minimal).", FSFAT_FOPEN_TEST_06),
Case("FSFAT_FOPEN_TEST_07: fopen()/errno handling.", FSFAT_FOPEN_TEST_07),
Case("FSFAT_FOPEN_TEST_08: ferror()/clearerr()/errno handling.", FSFAT_FOPEN_TEST_08),
Case("FSFAT_FOPEN_TEST_09: ftell() handling.", FSFAT_FOPEN_TEST_09),
Case("FSFAT_FOPEN_TEST_10: remove() test.", FSFAT_FOPEN_TEST_10),
Case("FSFAT_FOPEN_TEST_11: rename().", FSFAT_FOPEN_TEST_11),
Case("FSFAT_FOPEN_TEST_12: opendir(), readdir(), closedir() test.", FSFAT_FOPEN_TEST_12),
Case("FSFAT_FOPEN_TEST_13: mkdir() test.", FSFAT_FOPEN_TEST_13),
Case("FSFAT_FOPEN_TEST_14: stat() test.", FSFAT_FOPEN_TEST_14),
Case("FSFAT_FOPEN_TEST_15: format() test.", FSFAT_FOPEN_TEST_15),
Case("FSFAT_FOPEN_TEST_16: write/check n x 25kB data files.", FSFAT_FOPEN_TEST_16),
};
/* Declare your test specification with a custom setup handler */
Specification specification(greentea_setup, cases);
int main()
{
return !Harness::run(specification);
}
/// @endcond