Diff: src/all_io.cpp

Revision:

1:9f8583ba2431

Parent:

0:44a3005d4f20

Child:

3:d8948c5b2951

--- a/src/all_io.cpp	Sat Nov 24 18:22:31 2018 +0000
+++ b/src/all_io.cpp	Sun Nov 25 00:36:35 2018 +0000
@@ -34,24 +34,30 @@
 //
 // Slots 12 to 0 are activated with the wr_out signals
 // wr_out[13] = slots[12:0]
-DigitalOut wr_out[13] = {PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0};
+//DigitalOut wr_out[13] = {PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0};
+BusOut wr_out(PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0);
 // en_out are binary weighted signals that activate groups of DC-DC converters on the slot cards.
 // en_out[6] = {en32, en16, en8, en4, en2, en1}
-DigitalOut en_out[6] = {PA_9, PA_8, PA_7, PA_6, PA_5, PA_4};
+//DigitalOut en_out[6] = {PA_9, PA_8, PA_7, PA_6, PA_5, PA_4};
+BusOut en_out(PA_9, PA_8, PA_7, PA_6, PA_5, PA_4);
 // Expansion port signals
 // eport[16] = eport[18:3]
-DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_11, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0};
-// Use extchlat to latch new wr_out signals to the slots.
+//DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_11, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0};
+DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_12, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0}; //RK 11/24/2018 PB_11 throws an error. Identifier "PB_11" is undefined. PB_11 is connevcted to VCAP1.
+// Use extchlat to latch new wr_out signals to the external slots via ribbon cable.
 DigitalOut extchlat = PA_1;
 // all_on indicates that the load demanded a high amount of current and all DC-DC converters are enabled.
 DigitalIn  all_on = PA_0;
 
 // Analog IO
 //
-AnalogIn V48(PA_13);
-AnalogIn V24(PA_15);
-AnalogIn V12(PA_14);
+AnalogIn VIN48(PA_13);
+AnalogIn VIN24(PA_15);
+AnalogIn VIN12(PA_14);
 
-AnalogIn I48(PA_12);
-AnalogIn I24(PA_10);
-AnalogIn I12(PA_11);
+AnalogIn IIN48(PA_12);
+AnalogIn IIN24(PA_10);
+AnalogIn IIN12(PA_11);
+
+// Change LED out to PD_2
+DigitalOut myled = PD_2;