File content as of revision 4:db38665c3727:

//-------------------------------------------------------------------------------
// 
//  Treehouse Designs Inc.
//  Colorado Springs, Colorado
// 
//  Copyright (c) 2016 by Treehouse Designs Inc. 
//  Copyright (c) 2018 by Agility Power Systems Inc. 
// 
//  This code is the property of Treehouse Designs, Inc. (Treehouse) and
//  Agility Power Systems Inc. (Agility) and may not be redistributed
//  in any form without prior written permission from 
//  both copyright holders, Treehouse and Agility.
//
//  The above copyright notice and this permission notice shall be included in
//  all copies or substantial portions of the Software.
// 
//   
//-------------------------------------------------------------------------------
// 
//  REVISION HISTORY:
//  
//   $Author: $
//   $Rev: $
//   $Date: $
//   $URL: $
// 
//-------------------------------------------------------------------------------

#include "mbed.h"
#include "all_io.h"
#include "PortOut.h"

// Digital IO
//
// Slots 12 to 0 are activated with the wr_out signals
// wr_out[13] = slots[12:0]
//DigitalOut wr_out[13] = {PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0};
//BusOut wr_out(PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0); //RK: Need to change ADC inputs to PC_0-PC_5
BusOut wr_out(PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PA_15, PA_14, PA_13, PA_12, PA_11, PA_10); //RK: Need to change ADC inputs to PC_0-PC_5

// en_out are binary weighted signals that activate groups of DC-DC converters on the slot cards.
// en_out[6] = {en32, en16, en8, en4, en2, en1}
//DigitalOut en_out[6] = {PA_9, PA_8, PA_7, PA_6, PA_5, PA_4};
//BusOut en_out(PA_9, PA_8, PA_7, PA_6, PA_5, PA_4);
BusOut en_out(PA_9, PA_8, PA_7, PA_6, PC_14, PA_4); //RK: debug 11/26/2018

// Expansion port signals
// eport[16] = eport[18:3]
//DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_11, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0};
DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PC_15, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0}; //RK 11/24/2018 PB_11 throws an error. Identifier "PB_11" is undefined. PB_11 is connected to VCAP1.

// Use extchlat to latch new wr_out signals to the external slots via ribbon cable.
DigitalOut extchlat(PA_1);

// all_on indicates that the load demanded a high amount of current and all DC-DC converters are enabled.
DigitalIn  all_on(PA_0);

// Analog IO
//
//AnalogIn VIN48(PA_13);
//AnalogIn VIN24(PA_15);
//AnalogIn VIN12(PA_14);
//AnalogIn IIN48(PA_12);
//AnalogIn IIN24(PA_10);
//AnalogIn IIN12(PA_11);
AnalogIn VIN48(PC_5);
AnalogIn VIN24(PC_4);
AnalogIn VIN12(PC_3);
AnalogIn IIN48(PC_2);
AnalogIn IIN24(PC_1);
AnalogIn IIN12(PC_0);

// Change LED out to PD_2
//DigitalOut myled = PD_2;
//DigitalOut myled = PA_5;
DigitalOut myled(LED1);