File content as of revision 1:9f8583ba2431:

//-------------------------------------------------------------------------------
// 
//  Treehouse Designs Inc.
//  Colorado Springs, Colorado
// 
//  Copyright (c) 2016 by Treehouse Designs Inc. 
//  Copyright (c) 2018 by Agility Power Systems Inc. 
// 
//  This code is the property of Treehouse Designs, Inc. (Treehouse) and
//  Agility Power Systems Inc. (Agility) and may not be redistributed
//  in any form without prior written permission from 
//  both copyright holders, Treehouse and Agility.
//
//  The above copyright notice and this permission notice shall be included in
//  all copies or substantial portions of the Software.
// 
//   
//-------------------------------------------------------------------------------
// 
//  REVISION HISTORY:
//  
//   $Author: $
//   $Rev: $
//   $Date: $
//   $URL: $
// 
//-------------------------------------------------------------------------------

#include "mbed.h"
#include "all_io.h"
#include "PortOut.h"

// Digital IO
//
// Slots 12 to 0 are activated with the wr_out signals
// wr_out[13] = slots[12:0]
//DigitalOut wr_out[13] = {PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0};
BusOut wr_out(PC_12, PC_11, PC_10, PC_9, PC_8, PC_7, PC_6, PC_5, PC_4, PC_3, PC_2, PC_1, PC_0);
// en_out are binary weighted signals that activate groups of DC-DC converters on the slot cards.
// en_out[6] = {en32, en16, en8, en4, en2, en1}
//DigitalOut en_out[6] = {PA_9, PA_8, PA_7, PA_6, PA_5, PA_4};
BusOut en_out(PA_9, PA_8, PA_7, PA_6, PA_5, PA_4);
// Expansion port signals
// eport[16] = eport[18:3]
//DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_11, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0};
DigitalIn  eport[16] = {PB_15, PB_14, PB_13, PB_12, PB_12, PB_10, PB_9, PB_8, PB_7, PB_6, PB_5, PB_4, PB_3, PB_2, PB_1, PB_0}; //RK 11/24/2018 PB_11 throws an error. Identifier "PB_11" is undefined. PB_11 is connevcted to VCAP1.
// Use extchlat to latch new wr_out signals to the external slots via ribbon cable.
DigitalOut extchlat = PA_1;
// all_on indicates that the load demanded a high amount of current and all DC-DC converters are enabled.
DigitalIn  all_on = PA_0;

// Analog IO
//
AnalogIn VIN48(PA_13);
AnalogIn VIN24(PA_15);
AnalogIn VIN12(PA_14);

AnalogIn IIN48(PA_12);
AnalogIn IIN24(PA_10);
AnalogIn IIN12(PA_11);

// Change LED out to PD_2
DigitalOut myled = PD_2;