![](/media/cache/group/toshiba_logo-square.jpg.50x50_q85.jpg)
Mbed OS example of Pelion device management client
This example is known to work great on the following platforms:
- AdBun-M46B over Wi-Fi.
To use this example, connect ESP8266 Wi-Fi module (Grove UART WiFi) to the AdBun-M46B board as below:
ESP8266 Wi-Fi | AdBun-M46B |
---|---|
TX | PL1 (CN4-22) |
RX | PL2 (CN4-24) |
VIN | VCC3.3 (CN11-5) |
GND | GND (CN11-6) |
Example functionality
- Initialize, connect and register to Pelion DM
- Interact with the user through the serial port (115200 bauds)
- Press enter through putty/minicom to simulate button
- Press i to print endpoint name
- Press Ctrl-C to to unregister
- Press r to reset storage and reboot (warning: it generates a new device ID!)
Instructions to use this program with Mbed CLI
1. Import the application into your desktop:
mbed import https://os.mbed.com/teams/Toshiba/code/mbed-os-example-pelion/ cd mbed-os-example-pelion
2. Install the CLOUD_SDK_API_KEY
mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>
For instructions on how to generate your API key, please see the documentation.
3. Initialize firmware credentials (done once per repository). You can use the following command:
mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force
If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.
4. Connect Pins used with Wifi shield (ESP8266) and SD card shield:
5. Edit mbed_app.json to specify Wi-Fi access point information
"nsapi.default-wifi-ssid" : "\"SSID\"", "nsapi.default-wifi-password" : "\"PASSWORD\""
6. Compile and program:
mbed compile -t <toolchain> -m TMPM46B
(supported toolchains : GCC_ARM / ARM / IAR)
TESTS/device_update.py
- Committer:
- MACRUM
- Date:
- 2019-12-12
- Revision:
- 0:9f917a7bf2da
File content as of revision 0:9f917a7bf2da:
""" Copyright 2019 ARM Limited Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. """ # pylint: disable=missing-docstring # pylint: disable=line-too-long,method-hidden,relative-import import time from icetea_lib.bench import TestStepFail from pelion_helper import PelionBase class Testcase(PelionBase): def __init__(self): PelionBase.__init__(self, name="device_update", title="Example application can perform firmware update", status="released", type="acceptance", component=["mbed_cloud_client_example"]) def setup(self): super(Testcase, self).setup() super(Testcase, self).setup_update() def case(self): # Create filter for update campaign generation, with automatic startup update_filter = self.prepare_campaign_filter(state="scheduled") # Start the update campaign campaign_id = self.post_campaign(update_filter) # Wait for the campaign to reach autostopped state timeout = 600 _endtime = time.time() + timeout while True: self.delay(10) result = self.check_campaign_state(campaign_id) # Update campaign has stopped if result[0] == "autostopped": break if time.time() > _endtime: self.logger.error("Campaign in state: %s, Device in state: %s", result[0], result[1]) raise TestStepFail("Campaign did not finish in %d" % timeout) # Check for final state of the device final_result = self.check_campaign_state(campaign_id) if final_result[1] != "deployed": raise TestStepFail("Device in %s state, expected deployed" % result[1]) self.logger.info("Firmware update finished successfully") def teardown(self): self.connect_api.stop_notifications()