Toshiba
Mbed OS example of Pelion device management client
This example is known to work great on the following platforms:
- AdBun-M46B over Wi-Fi.
To use this example, connect ESP8266 Wi-Fi module (Grove UART WiFi) to the AdBun-M46B board as below:
| ESP8266 Wi-Fi | AdBun-M46B |
|---|---|
| TX | PL1 (CN4-22) |
| RX | PL2 (CN4-24) |
| VIN | VCC3.3 (CN11-5) |
| GND | GND (CN11-6) |
Example functionality
- Initialize, connect and register to Pelion DM
- Interact with the user through the serial port (115200 bauds)
- Press enter through putty/minicom to simulate button
- Press i to print endpoint name
- Press Ctrl-C to to unregister
- Press r to reset storage and reboot (warning: it generates a new device ID!)
Instructions to use this program with Mbed CLI
1. Import the application into your desktop:
mbed import https://os.mbed.com/teams/Toshiba/code/mbed-os-example-pelion/ cd mbed-os-example-pelion
2. Install the CLOUD_SDK_API_KEY
mbed config -G CLOUD_SDK_API_KEY <PELION_DM_API_KEY>
For instructions on how to generate your API key, please see the documentation.
3. Initialize firmware credentials (done once per repository). You can use the following command:
mbed dm init -d "<your company name in Pelion DM>" --model-name "<product model identifier>" -q --force
If above command do not work for your Mbed CLI, please consider upgrading Mbed CLI to version 1.8.x or above.
4. Connect Pins used with Wifi shield (ESP8266) and SD card shield:
5. Edit mbed_app.json to specify Wi-Fi access point information
"nsapi.default-wifi-ssid" : "\"SSID\"",
"nsapi.default-wifi-password" : "\"PASSWORD\""
6. Compile and program:
mbed compile -t <toolchain> -m TMPM46B
(supported toolchains : GCC_ARM / ARM / IAR)
Diff: update_default_resources.c
- Revision:
- 0:9f917a7bf2da
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/update_default_resources.c Thu Dec 12 10:26:06 2019 +0900
@@ -0,0 +1,41 @@
+// ----------------------------------------------------------------------------
+// Copyright 2016-2017 ARM Ltd.
+//
+// SPDX-License-Identifier: Apache-2.0
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+// http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+// ----------------------------------------------------------------------------
+
+#ifdef MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#include MBED_CLOUD_CLIENT_USER_CONFIG_FILE
+#endif
+
+#include <stdint.h>
+
+#ifdef MBED_CLOUD_DEV_UPDATE_ID
+const uint8_t arm_uc_vendor_id[16] = { "dev_manufacturer" };
+const uint16_t arm_uc_vendor_id_size = sizeof(arm_uc_vendor_id);
+
+const uint8_t arm_uc_class_id[16] = { "dev_model_number" };
+const uint16_t arm_uc_class_id_size = sizeof(arm_uc_class_id);
+#endif
+
+#ifdef MBED_CLOUD_DEV_UPDATE_CERT
+const uint8_t arm_uc_default_fingerprint[32] = { 0 };
+const uint16_t arm_uc_default_fingerprint_size =
+ sizeof(arm_uc_default_fingerprint);
+
+const uint8_t arm_uc_default_certificate[1] = { 0 };
+const uint16_t arm_uc_default_certificate_size =
+ sizeof(arm_uc_default_certificate);
+#endif
\ No newline at end of file