Thing Innovations / Mbed 2 deprecated mDot_TTN_OTAA_Node Featured

Demonstration TTN OTAA node

Dependencies:   BME280 DS1820 libmDot mbed-rtos mbed

This is an example application for the MultiTech mDot and connects to The Things Network using Over The Air Activation (OTAA). It sends data from a Dallas Semiconductors DS18B20 OneWire temperature sensor.

Register a device and generate a random AppKey for the currently used application Id: (You need to use your own device IDs, the ones shown here are examples only)

./ttnctl devices register 0080000000000000 INFO Generating random AppKey... INFO Registered device AppKey=000102030405060708090A0B0C0D0E0F DevEUI=0080000000000000

or to specify the same AppKey for a new device or to reregister the same device again:

./ttnctl devices register 0080000000000000 000102030405060708090A0B0C0D0E0F

./ttnctl devices info 0080000000000000 Dynamic device:

AppEUI: 70B3D50000000000 {0x70, 0xB3, 0xD5, 0x00, 0x00, 0x00, 0x00, 0x00}

DevEUI: 0080000000000000 {0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}

AppKey: 000102030405060708090A0B0C0D0E0F {0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F}

Copy the AppEUI and AppKey values provided in hex array notation above to the AppEUI and AppKey parameters below.

diff -r 717a3d909c6b -r 38ce10209eff main.cpp
--- a/main.cpp	Sat Nov 14 20:17:03 2015 +0000
+++ b/main.cpp	Sat Nov 14 20:54:36 2015 +0000
@@ -1,6 +1,6 @@
 /** mDot_TTN_DS18B20 - Simple mDot temperature sensor using Dallas Semiconductors DS18B20 OneWire temperature sensor.
  * It used the MANUAL join mode with parameters for The Things Network.
- * 
+ *
  *
  * Uses MultiTech mDot developer board http://www.multitech.com/models/94558010LF
  * Requires a MultiTech MultiConnect Conduit http://www.multitech.com/models/94557203LF
@@ -30,7 +30,7 @@
 uint8_t NwkSKey[16]= {0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C};
 
 // Network Address - Get your own address range at http://thethingsnetwork.org/wiki/AddressSpace
-uint8_t NetworkAddr[4]= {0x02,0x01,0xXX,0xXX};      // Our Network address or Node ID
+uint8_t NetworkAddr[4]= {0x02,0x01,0x00,0x00};      // Our Network address or Node ID
 
 
 // Some defines for the LoRa configuration
@@ -68,9 +68,6 @@
 
     float temperature = 0.0;
 
-    // Enable internal pullup on input pin
-    configReset.mode(PullUp);
-
     pc.baud(115200);
     pc.printf("TTN mDot LoRa Temperature sensor\n\r");