This will generate the message for the programme
Dependencies: MODSERIAL Nanopb
memspcr.pb.c
- Committer:
- justinbuckland
- Date:
- 2019-09-20
- Revision:
- 4:629ca12c04f4
- Parent:
- 2:b46d53a5f931
File content as of revision 4:629ca12c04f4:
/* Automatically generated nanopb constant definitions */ /* Generated by nanopb-0.3.9.3 at Thu Aug 29 14:10:38 2019. */ #include "memspcr.pb.h" /* @@protoc_insertion_point(includes) */ #if PB_PROTO_HEADER_VERSION != 30 #error Regenerate this file with the current version of nanopb generator. #endif const pb_field_t memspcr_ThermalStep_fields[4] = { PB_FIELD( 1, INT32 , SINGULAR, STATIC , FIRST, memspcr_ThermalStep, elapsed_time_ms, elapsed_time_ms, 0), PB_FIELD( 2, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalStep, resistance, elapsed_time_ms, 0), PB_FIELD( 3, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalStep, camera_offset_ms, resistance, 0), PB_LAST_FIELD }; const pb_field_t memspcr_ThermalConfiguration_fields[7] = { PB_FIELD( 2, FLOAT , SINGULAR, STATIC , FIRST, memspcr_ThermalConfiguration, guard_drive_ratio, guard_drive_ratio, 0), PB_FIELD( 4, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, adc_settling_time_us, guard_drive_ratio, 0), PB_FIELD( 7, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_kp, adc_settling_time_us, 0), PB_FIELD( 8, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_integral_time, pid_kp, 0), PB_FIELD( 9, FLOAT , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, pid_derivative_time, pid_integral_time, 0), PB_FIELD( 10, INT32 , SINGULAR, STATIC , OTHER, memspcr_ThermalConfiguration, control_loop_interval_ms, pid_derivative_time, 0), PB_LAST_FIELD }; const pb_field_t memspcr_OpticsConfiguration_fields[4] = { PB_FIELD( 1, INT32 , SINGULAR, STATIC , FIRST, memspcr_OpticsConfiguration, pre_trigger_ms, pre_trigger_ms, 0), PB_FIELD( 2, INT32 , SINGULAR, STATIC , OTHER, memspcr_OpticsConfiguration, on_time_ms, pre_trigger_ms, 0), PB_FIELD( 3, FLOAT , SINGULAR, STATIC , OTHER, memspcr_OpticsConfiguration, led_pwm, on_time_ms, 0), PB_LAST_FIELD }; const pb_field_t memspcr_FluidicConfiguration_fields[3] = { PB_FIELD( 1, FLOAT , SINGULAR, STATIC , FIRST, memspcr_FluidicConfiguration, pressure_setpoint, pressure_setpoint, 0), PB_FIELD( 2, FLOAT , SINGULAR, STATIC , OTHER, memspcr_FluidicConfiguration, pressure_hysterisis, pressure_setpoint, 0), PB_LAST_FIELD }; const pb_field_t memspcr_ExperimentConfiguration_fields[7] = { PB_FIELD( 1, MESSAGE , SINGULAR, STATIC , FIRST, memspcr_ExperimentConfiguration, thermal, thermal, &memspcr_ThermalConfiguration_fields), PB_FIELD( 3, MESSAGE , REPEATED, CALLBACK, OTHER, memspcr_ExperimentConfiguration, profile, thermal, &memspcr_ThermalStep_fields), PB_FIELD( 4, MESSAGE , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, optics, profile, &memspcr_OpticsConfiguration_fields), PB_FIELD( 5, MESSAGE , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, fluidics, optics, &memspcr_FluidicConfiguration_fields), PB_FIELD( 6, INT32 , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, logging_interval_ms, fluidics, 0), PB_FIELD( 7, UENUM , SINGULAR, STATIC , OTHER, memspcr_ExperimentConfiguration, selected_heater, logging_interval_ms, 0), PB_LAST_FIELD }; /* Check that field information fits in pb_field_t */ #if !defined(PB_FIELD_32BIT) /* If you get an error here, it means that you need to define PB_FIELD_32BIT * compile-time option. You can do that in pb.h or on compiler command line. * * The reason you need to do this is that some of your messages contain tag * numbers or field sizes that are larger than what can fit in 8 or 16 bit * field descriptors. */ PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 65536), YOU_MUST_DEFINE_PB_FIELD_32BIT_FOR_MESSAGES_memspcr_ThermalStep_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_FluidicConfiguration_memspcr_ExperimentConfiguration) #endif #if !defined(PB_FIELD_16BIT) && !defined(PB_FIELD_32BIT) /* If you get an error here, it means that you need to define PB_FIELD_16BIT * compile-time option. You can do that in pb.h or on compiler command line. * * The reason you need to do this is that some of your messages contain tag * numbers or field sizes that are larger than what can fit in the default * 8 bit descriptors. */ PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 256 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 256 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 256), YOU_MUST_DEFINE_PB_FIELD_16BIT_FOR_MESSAGES_memspcr_ThermalStep_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_FluidicConfiguration_memspcr_ExperimentConfiguration) #endif /* @@protoc_insertion_point(eof) */