Diff: memspcr.pb.c

Revision:

0:54bedd3964e2

Child:

5:702b32ead94e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/memspcr.pb.c	Tue Aug 27 07:51:34 2019 +0000
@@ -0,0 +1,79 @@
+/* Automatically generated nanopb constant definitions */
+/* Generated by nanopb-0.3.9.3 at Wed Aug 21 21:39:54 2019. */
+
+#include "memspcr.pb.h"
+
+/* @@protoc_insertion_point(includes) */
+#if PB_PROTO_HEADER_VERSION != 30
+#error Regenerate this file with the current version of nanopb generator.
+#endif
+
+
+
+const pb_field_t memspcr_ThermalStep_fields[4] = {
+    PB_FIELD(  1, INT32   , SINGULAR, STATIC  , FIRST, memspcr_ThermalStep, elapsed_time_ms, elapsed_time_ms, 0),
+    PB_FIELD(  2, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalStep, resistance, elapsed_time_ms, 0),
+    PB_FIELD(  3, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalStep, camera_offset_ms, resistance, 0),
+    PB_LAST_FIELD
+};
+
+const pb_field_t memspcr_ThermalConfiguration_fields[9] = {
+    PB_FIELD(  1, MESSAGE , REPEATED, CALLBACK, FIRST, memspcr_ThermalConfiguration, profile, profile, &memspcr_ThermalStep_fields),
+    PB_FIELD(  2, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, guard_drive_ratio, profile, 0),
+    PB_FIELD(  3, UENUM   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, selected_heater, guard_drive_ratio, 0),
+    PB_FIELD(  4, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, adc_settling_time_us, selected_heater, 0),
+    PB_FIELD(  7, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_kp, adc_settling_time_us, 0),
+    PB_FIELD(  8, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_integral_time, pid_kp, 0),
+    PB_FIELD(  9, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, pid_derivative_time, pid_integral_time, 0),
+    PB_FIELD( 10, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ThermalConfiguration, control_loop_interval, pid_derivative_time, 0),
+    PB_LAST_FIELD
+};
+
+const pb_field_t memspcr_OpticsConfiguration_fields[4] = {
+    PB_FIELD(  1, INT32   , SINGULAR, STATIC  , FIRST, memspcr_OpticsConfiguration, pre_trigger_ms, pre_trigger_ms, 0),
+    PB_FIELD(  2, INT32   , SINGULAR, STATIC  , OTHER, memspcr_OpticsConfiguration, on_time_ms, pre_trigger_ms, 0),
+    PB_FIELD(  3, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_OpticsConfiguration, led_pwm, on_time_ms, 0),
+    PB_LAST_FIELD
+};
+
+const pb_field_t memspcr_FluidicConfiguration_fields[3] = {
+    PB_FIELD(  1, FLOAT   , SINGULAR, STATIC  , FIRST, memspcr_FluidicConfiguration, pressure_setpoint, pressure_setpoint, 0),
+    PB_FIELD(  2, FLOAT   , SINGULAR, STATIC  , OTHER, memspcr_FluidicConfiguration, pressure_hysterisis, pressure_setpoint, 0),
+    PB_LAST_FIELD
+};
+
+const pb_field_t memspcr_ExperimentConfiguration_fields[5] = {
+    PB_FIELD(  1, MESSAGE , SINGULAR, STATIC  , FIRST, memspcr_ExperimentConfiguration, thermal, thermal, &memspcr_ThermalConfiguration_fields),
+    PB_FIELD(  2, MESSAGE , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, optics, thermal, &memspcr_OpticsConfiguration_fields),
+    PB_FIELD(  3, MESSAGE , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, fluidics, optics, &memspcr_FluidicConfiguration_fields),
+    PB_FIELD(  4, INT32   , SINGULAR, STATIC  , OTHER, memspcr_ExperimentConfiguration, logging_interval_ms, fluidics, 0),
+    PB_LAST_FIELD
+};
+
+
+
+/* Check that field information fits in pb_field_t */
+#if !defined(PB_FIELD_32BIT)
+/* If you get an error here, it means that you need to define PB_FIELD_32BIT
+ * compile-time option. You can do that in pb.h or on compiler command line.
+ * 
+ * The reason you need to do this is that some of your messages contain tag
+ * numbers or field sizes that are larger than what can fit in 8 or 16 bit
+ * field descriptors.
+ */
+PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 65536 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 65536), YOU_MUST_DEFINE_PB_FIELD_32BIT_FOR_MESSAGES_memspcr_ThermalStep_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_FluidicConfiguration_memspcr_ExperimentConfiguration)
+#endif
+
+#if !defined(PB_FIELD_16BIT) && !defined(PB_FIELD_32BIT)
+/* If you get an error here, it means that you need to define PB_FIELD_16BIT
+ * compile-time option. You can do that in pb.h or on compiler command line.
+ * 
+ * The reason you need to do this is that some of your messages contain tag
+ * numbers or field sizes that are larger than what can fit in the default
+ * 8 bit descriptors.
+ */
+PB_STATIC_ASSERT((pb_membersize(memspcr_ExperimentConfiguration, thermal) < 256 && pb_membersize(memspcr_ExperimentConfiguration, optics) < 256 && pb_membersize(memspcr_ExperimentConfiguration, fluidics) < 256), YOU_MUST_DEFINE_PB_FIELD_16BIT_FOR_MESSAGES_memspcr_ThermalStep_memspcr_ThermalConfiguration_memspcr_OpticsConfiguration_memspcr_FluidicConfiguration_memspcr_ExperimentConfiguration)
+#endif
+
+
+/* @@protoc_insertion_point(eof) */
\ No newline at end of file