![](/media/cache/group/default_image.jpg.50x50_q85.jpg)
lab 7
Dependencies: SDFileSystem mbed
Diff: DS1307/ds1307.h
- Revision:
- 0:f6d3b930f382
diff -r 000000000000 -r f6d3b930f382 DS1307/ds1307.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DS1307/ds1307.h Sat Dec 10 21:08:30 2016 +0000 @@ -0,0 +1,224 @@ +#ifndef DS1307_H +#define DS1307_H + +/* mbed Dallas Semiconductor DS1307 serial real time clock +* Copyright (c) 2012 pksmith +* +* Permission is hereby granted, free of charge, to any person obtaining a copy +* of this software and associated documentation files (the "Software"), to deal +* in the Software without restriction, including without limitation the rights +* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +* copies of the Software, and to permit persons to whom the Software is +* furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in +* all copies or substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN +* THE SOFTWARE. +*/ + +#include "mbed.h" + +#define DS1307_addr 0xD0 // this is fixed by Dallas +#define DS1307_freq 100000 // this is the Dallas spec for operating i2c for this device +#define DS1307_sec 0x00 // seconds +#define DS1307_min 0x01 // min +#define DS1307_hour 0x02 // hours +#define DS1307_day 0x03 // day +#define DS1307_date 0x04 // date +#define DS1307_month 0x05 // month +#define DS1307_year 0x06 // year +#define DS1307_sqrout 0x07 // square output register +#define DS1307_ramstart 0x08 // register address that ram starts at +#define DS1307_lastreg 0x3F // this is the last register in the device (note also this register is used to address everything so it gets clobbered) +#define DS1307_lastram 0x3E // last usable ram by this class as the lastreg is clobbered by code for normal operation + +/** DS1307 control and communication class using mbed's i2c class + * + * Example: + * @code + * // show how the DS1307 class works + * #include "ds1307.h" + * #include "mbed.h" + * + * Serial pc(USBTX, USBRX); // tx, rx for debug and usb pc comunications + * + * DS1307 my1307(p9,p10); // start DS1307 class and give it pins for connections of the DS1307 device + * + * int sec = 0; + * int min = 0; + * int hours = 0; + * int day = 0; + * int date = 0; + * int month = 0; + * int year = 0; + * + * void test_rw(int test) { + * if (test == 0) pc.printf("Last R/W operaion passed!\n\r"); + * else pc.printf("Last R/W operation failed!\n\r"); + * } + * + * int main() { + * int junk = 0; + * + * sec = 24; // 24 seconds + * min = 13; // 13 min + * hours = 13; // 1 pm + * day = 4; // wednesday + * date = 20; // June 20 + * month = 6; + * year = 12; // 2012 + * // set time to these values on the ds1307 connected device + * + * test_rw(my1307.settime( sec, min, hours, day, date, month, year)); + * pc.printf("seconds set are %.2D \n\r",sec); + * pc.printf("min set are %.2D \n\r",min); + * pc.printf("hour set are %.2D \n\r",hours); + * pc.printf("day set are %.2D \n\r",day); + * pc.printf("date set are %.2D \n\r",date); + * pc.printf("month set are %.2D \n\r",month); + * pc.printf("year set are %.2D \n\r",year); + * wait(3); + * // now read the time of the DS1307 device and see what time it is + * // note that because of the 3 second wait this time should be 3 seconds past what it was set to earlier + * + * test_rw(my1307.gettime( &sec, &min, &hours, &day, &date, &month, &year)); + * pc.printf("seconds read are %.2D \n\r",sec); + * pc.printf("min read are %.2D \n\r",min); + * pc.printf("hour read are %.2D \n\r",hours); + * pc.printf("day read are %.2D \n\r",day); + * pc.printf("date read are %.2D \n\r",date); + * pc.printf("month read are %.2D \n\r",month); + * pc.printf("year read are %.2D \n\r",year); + * + * junk = 0x39; // just a junk value do read and write test to DS1307 ram + * test_rw(my1307.write( 0x20, junk)); // this should write the value of junk to register 0x20 (a ram location) in the ds1307. + * pc.printf("Value written to register 0x20 %.2X \n\r",junk); + * junk = 0; // clear junk to show that when the register is read from the correct value is obtained + * test_rw(my1307.read( 0x20, &junk)); // this should read register 0x20 + * pc.printf("Value read from register 0x20 %.2X \n\r",junk); + * } + * @endcode + */ +class DS1307 { +public: + /** Create object connected to DS1307 pins ( remember both pins need pull up resisters) + * + * Ensure the pull up resistors are used on these pins. Also note there is no checking on + * if you use thes pins p9, p10, p27, p28 so ensure you only use these ones on the LPC1768 device + * + * @param sda pin that DS1307 connected to (p9 or p28 as defined on LPC1768) + * @param slc pin that DS1307 connected to (p10 or p27 ad defined on LPC1768) + */ + DS1307( PinName sda, PinName slc) ; // constructor + + ~DS1307(); // destructor + + /** Bulk read of several registers at a time + * + * Ensure the variable data pointer passed to this function has the room needed to recieve the quantity! + * + * @param addr the address to read from + * @param quantity the amount of registers to read from + * @param data the place to put the values read + * @param returns 0 if read worked 1 if the read of DS1307 failed for some reason + */ + int read( int addr, int quantity, char *data); // to read some of the 63 bytes from DS1307 + + /** Read one register of DS1307 device + * + * @param addr the address to read from + * @param data read from the one register + * @param returns 0 if read worked 1 if the read of DS1307 failed for some reason + */ + int read(int addr, int *data); // to read one byte only + + /** Bulk write of several registers at a time + * + * @param addr the address to write to + * @param quantity the amount of registers to write to + * @param data that contains the values to be written to the registers + * @param returns 0 if write worked 1 if the write to DS1307 failed for some reason + */ + int write( int addr, int quantity, char *data); // to write bytes to some of the 63 locations in the DS1307 + + /** Write one register of DS1307 device + * + * @param addr the address to write to + * @param data to write to register + * @param returns 0 if write worked 1 if the write to DS1307 failed for some reason + */ + int write( int addr, int data ); // to write one byte only + + /** Start DS1307 clock + * + * @param returns 0 if clock started 1 if the write command to DS1307 failed for some reason + */ + int start_clock(void); // start the clock + + /** Stop DS1307 clock + * + * @param returns 0 if clock stopped 1 if the write command to DS1307 failed for some reason + */ + int stop_clock(void); // stop clock + + /** Set twelve hour mode on DS1307 (note this also converts 24 hour time to 12 time if needed on DS1307) + * + * Note this will convert DS1307 time values in registers to 12 hour values from 24 hour values if needed + * + * @param returns 0 if DS1307 is now in 12 hour mode 1 if the command to DS1307 failed for some reason + */ + int twelve_hour(void); // set 12 hour mode + + /** Set twenty four hour mode on DS1307 + * + * Note this will convert DS1307 time values in registers to 24 hour values from 12 hour values if needed + * + * @param returns 0 if DS1307 is now in 24 hour mode 1 if the command to DS1307 failed for some reason + */ + int twentyfour_hour(void); // set 24 hour mode + + /** Set the time to some current or other value ( note that this will start the clock after it is set!) + * + * Note this will return 1 if any of the values passed to this function are not as listed below! + * + * @param sec the seconds value (0 - 59) + * @param min the minute value (0 - 59) + * @param hour the hour value (0 - 23) always in 24 hour + * @param day the day value ( sunday is 1 ) + * @param date the date value (1 - 31) + * @param month the month value (1-12) + * @param year the year value (00 - 99) this is for 2000 to 2099 only as i understand it! + * @param returns 0 if time is set 1 if the time setting failed in some way + */ + int settime(int sec, int min, int hour, int day, int date, int month, int year); // to set the current time and start clock + + /** Read the current time of the DS1307 + * + * @param sec the seconds value (0 - 59) + * @param min the minute value (0 - 59) + * @param hour the hour value (0 - 23) always in 24 hour + * @param day the day value ( sunday is 1 ) + * @param date the date value (1 - 31) + * @param month the month value (1-12) + * @param year the year value (00 - 99) this is for 2000 to 2099 only as i understand it! + * @param returns 0 if time is read correctly 1 if the time was not recieved correctly for some reason + */ + int gettime(int *sec, int *min, int *hour, int *day, int *date, int *month, int *year); // to get the current time information + + +protected: + I2C ds1307i2c; + int dectobcd( int ); + int bcdtodec( int ); + int hilow_check( int, int, int); + +}; + +#endif