Dependencies: USBDevice
Diff: main.cpp
- Revision:
- 32:51535920edd1
- Parent:
- 31:2e7483c7281b
--- a/main.cpp Fri May 01 17:28:49 2020 +0000
+++ b/main.cpp Wed Dec 29 06:43:21 2021 +0000
@@ -1,160 +1,139 @@
-#include "mbed.h"
-#include "SDFileSystem.h"
-#include "max32630fthr.h"
-#include "USBSerial.h"
-#include <ctype.h>
+// Application to:
+//1. Click Button to measure and display temperature.
+//2. Click again to stop measure
+//3. Repeat
-#define PERIOD 10 // Logging period in seconds
-#define CONVERT_T_DELAY 30
+
+
-//OT07 Registers
-#define OT07_STATUS 0x00 // OT07 status regiter
-#define OT07_INT_EN 0x01 // OT07 Interrupt Enable
-#define OT07_FIFO_W 0x04 // OT07 FIFO Write Pointer
-#define OT07_FIFO_R 0x05 // OT07 FIFO Read Pointer
-#define OT07_FIFO_OF 0x06 // OT07 FIFO Overflow Counter
-#define OT07_FIFO_COUNT 0x07 // OT07 FIFO Data Count
-#define OT07_FIFO_DATA 0x08 // OT07 FIFO Data
-#define OT07_FIFO_CNFG1 0x09 // OT07 FIFO Configuration 1 (FIFO_A_FULL)
-#define OT07_FIFO_CNFG2 0x0A // OT07 FIFO Configuration 2
-#define OT07_SYS 0x0C // OT07 System Configuration
-#define OT07_ALARM_HIGH_MSB 0x10 // OT07 Alarm High MSB
-#define OT07_ALARM_HIGH_LSB 0x11 // OT07 Alarm High LSB
-#define OT07_ALARM_LOW_MSB 0x12 // OT07 Alarm Low MSB
-#define OT07_ALARM_LOW_LSB 0x13 // OT07 Alarm LOW LSB
-#define OT07_ADC_SETUP 0x14 // OT07 Temp Seneor Setup (ADC_RES[7:6]) & Convert Temperature [0]
-#define OT07_GPIO_SETUP 0x20 // OT07 GPIO Setup, sets GPIO modes
-#define OT07_GPIO_CTRL 0x21 // OT07 GPIO control
-#define OT07_ROM_ID 0x31 // OT07 ROM_ID address of LSB?
-#define DEVICE_ACK 0
-#define DEVICE_NACK 1
-#define DEVICE_BAD_RESP 2
+#include "mbed.h"
+#include "USBSerial.h"
+#include "OT07_lib.h"
+#include <ctype.h> // to test and map characters: https://www.tutorialspoint.com/c_standard_library/ctype_h.htm
-#define MAX_DEVICES 64 // Maximum number of rom devices allowed
-#define ID_LENGTH 6 // Rom ID length in bytes
+#define PERIOD 10 // Logging period in seconds
+#define CONVERT_T_DELAY 30
#define BS 8 // ASCII Back Space
#define CR 13 // ASCII Carriage Return
-struct OT07_struct {
- char rom_id[ID_LENGTH]; // device ROM ID
- char I2C_address; // I2C addess, based on GPIO0 and GPIO1 at power up
-};
+
-struct TempResponse {
- double tempC; // Temperature in °C
- int status; // Status of Temperature read. 0 for success, 1 for error
-};
-
-const char* settings_file = "/sd/settings.txt";
-const char* log_file = "/sd/MAX30208Log.csv";
+//const char* settings_file = "/sd/settings.txt";
+//const char* log_file = "/sd/MAX30208Log.csv";
//global variable
//******************** init Feather Boared Hardware ***********************
-MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
+//MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
//microSD logging file system setup
-SDFileSystem sd(P0_5, P0_6, P0_4, P0_7, "sd"); // mosi, miso, sclk, cs
+//SDFileSystem sd(P0_5, P0_6, P0_4, P0_7, "sd"); // mosi, miso, sclk, cs
//SD card insertion detection pin
-DigitalIn SDDetect(P2_2, PullUp);
-InterruptIn SDInsert(P2_2);
+//DigitalIn SDDetect(P2_2, PullUp); //
+//InterruptIn SDInsert(P2_2); // Need DigitalIn before InterruptIn: https://os.mbed.com/docs/mbed-os/v6.2/apis/interruptin.html
// Virtual serial port over USB
USBSerial pc(0x0B6A, 0x0042, 0x0001, false);
// I2C setup
-I2C i2c(P3_4,P3_5); // P3_4 -> I2C1_SDA, P3_5-> I2C1_SCL
+I2C i2c(P1_6,P1_7); // P1_6 -> I2C_SDA, P1_7-> I2C_SCL
//Timer setup
-Ticker timer_1; // timer for blinking led heartbeat
+Ticker timer_1; // timer for blinking the blue LED: LED3
-bool tick_flag; // used for counting seconds
-bool log_flag = false;
+//bool tick_flag; // used for counting seconds
+//bool log_flag = false;
bool led_toggle_flag = false;
-bool button_flag = false;
-bool sd_insert_flag = false;
-bool error_flag;
-int error_ticks;
+bool button_flag = false; // used for measure and display temperature, and stop doing it.
+//bool sd_insert_flag = false;
+//bool error_flag;
+//int error_ticks;
//LED blink setup
-DigitalOut rLED(LED1);
-DigitalOut gLED(LED2);
-DigitalOut bLED(LED3);
+DigitalOut rLED(P2_4); // LED1 = P2_4
+DigitalOut gLED(P2_5); // LED2 = P2_5
+DigitalOut bLED(P2_6); // LED3 = P2_6
-InterruptIn button(SW1);
+
+//InterruptIn button(SW1); // button on the FTHR board
+InterruptIn button(P2_7); // button on the PICO board
void LED_blink_callback(){ // LED Heart beat
- led_toggle_flag = !led_toggle_flag;
+
+ bLED = !bLED; // toggle the LED3
- if(log_flag) //if logging
- {
-
- if(led_toggle_flag)
- {
- //toggle red led
- rLED = LED_ON;
- }
- else
- {
- rLED = LED_OFF;
- gLED = LED_OFF;
- bLED = LED_OFF;
- }
- }
- else if(error_flag) //if error (no sd card)
- {
- if(led_toggle_flag)
- {
- //toggle red led
- rLED = LED_ON;
- gLED = LED_ON;
- }
- else
- {
- rLED = LED_OFF;
- gLED = LED_OFF;
- bLED = LED_OFF;
- }
- error_ticks--;
- if(error_ticks <= 0)
- error_flag = false;
- }
- else
- {
- if(led_toggle_flag)
- {
- //toggle teal leds
- gLED = LED_ON;
- bLED = LED_ON;
- }
- else
- {
- rLED = LED_OFF;
- gLED = LED_OFF;
- bLED = LED_OFF;
- }
- }
-
- tick_flag = true;
-}
+// led_toggle_flag = !led_toggle_flag;
+//
+// if(log_flag) //if logging
+// {
+//
+// if(led_toggle_flag)
+// {
+// //toggle red led
+// rLED = LED_ON;
+// }
+// else
+// {
+// rLED = LED_OFF;
+// gLED = LED_OFF;
+// bLED = LED_OFF;
+// }
+// }
+// else if(error_flag) //if error (no sd card)
+// {
+// if(led_toggle_flag)
+// {
+// //toggle red led
+// rLED = LED_ON;
+// gLED = LED_ON;
+// }
+// else
+// {
+// rLED = LED_OFF;
+// gLED = LED_OFF;
+// bLED = LED_OFF;
+// }
+// error_ticks--;
+// if(error_ticks <= 0)
+// error_flag = false;
+// }
+// else
+// {
+// if(led_toggle_flag)
+// {
+// //toggle teal leds
+// gLED = LED_ON;
+// bLED = LED_ON;
+// }
+// else
+// {
+// rLED = LED_OFF;
+// gLED = LED_OFF;
+// bLED = LED_OFF;
+// }
+// }
+//
+// tick_flag = true;
+} // end of void LED_blink_callback()
void btn_pressed() //button pressed isr
{
button_flag = true;
+ gLED = !gLED;
}
-void sd_insert() //sd_insert pressed isr
-{
- sd_insert_flag = true;
-}
+//void sd_insert() //sd_insert pressed isr
+//{
+// sd_insert_flag = true;
+//}
// *****************************************************************************
@@ -194,368 +173,6 @@
return crc_table[crc8 ^ value];
}
-// *****************************************************************************
-// OT07_write_register(char, char, char) writes single byte to OT07
-// char I2C address
-// char OT07 register address
-// char data byte to be writen
-// returns 0 on success ACK, 1 on NACK
-// *****************************************************************************
-
-int OT07_write_register(char I2C_add, char reg_add, char byte){
- char data[2];
- int error;
- data[0] = reg_add;
- data[1] = byte;
- error = i2c.write(I2C_add,data,2);
- //if(DEBUG)db.printf("wr[%02X %02X %d]\r\n", data[0], data[1], error);
- return error;
-
-}
-
-/// ****************************************************************************
-// OT07_write_register(char, char, char *, int) writes multiple bytes to OT07
-// char I2C address
-// char OT07 register address
-// char * data vector of bytes to be written
-// int number of bytes to write
-// returns 0 on success ACK, 1 on NACK
-// *****************************************************************************
-
-int OT07_write_register(char I2C_add, char reg_add, char *bytes, int n){
- int i;
- //set start address
- char data[16];
- int error;
- data[0] = reg_add;
- for(i=1;i<=n;i++){
- data[i] = bytes[i-1];
- }
- error = i2c.write(I2C_add,data,n+1); // send n bytes of data
-
- return error;
-}
-
-// *****************************************************************************
-// OT07_read_register(char, char, char *, int) writes single byte to OT07
-// char I2C address
-// char OT07 register address
-// char * data vector for read bytes to be stored in
-// int number of bytes to read
-// returns 0 on success, 1 on fail
-// *****************************************************************************
-
-int OT07_read_register(char I2C_add, char reg_add, char *bytes, int n){
- int error;
- error = i2c.write(I2C_add,®_add,1,1);
- if(error)return error;
- error = i2c.read(I2C_add,bytes,n);
- //if(DEBUG)db.printf("rr e[%d]\r\n",error);
- return error;
-}
-
-// *****************************************************************************
-// search_I2C_bus(OT07_struct *) searches I2C address 0xA0, 0xA2, 0xA4 and 0xA6
-// OT07_struct * structure array to holds I2C address and rom_ids
-// returns number of devices found
-// *****************************************************************************
-
-int search_I2C_bus(OT07_struct OT07[]){
- char data[16];
- char I2C_add;
- //char GPIO;
- int error;
- int device_count = 0;
- int i;
- int j;
- for(i = 0;i<4;i++){
- I2C_add = 0xA0 + i*2;
- error = OT07_read_register(I2C_add,0xff,data,1);
-
- if(error == 0){
- if(data[0] == 0x30){
-
- OT07[device_count].I2C_address = I2C_add;
-
- OT07_read_register(I2C_add,OT07_ROM_ID,data,ID_LENGTH);
- for(j=ID_LENGTH-1;j>=0;j--){
- OT07[device_count].rom_id[j] = data[j];
-
- }
- device_count++;
- }
- }
-
- }
- return device_count;
-}
-
-// *****************************************************************************
-// convert_temperature(char) sends convert command to OT07 device
-// char I2C address
-// *****************************************************************************
-
-void convert_temperature(char I2C_add){ // set convert bit to start conversion
-
- char data[2];
-
- //read ADC_SETUP register 0x14
- OT07_read_register(I2C_add, OT07_ADC_SETUP,data,1);
-
- //mask convert register value with 0x01 and write back register 0x14
- OT07_write_register(I2C_add, OT07_ADC_SETUP, data[0]|0x01);
-}
-
-//******************************************************************************
-// get_temperature(char) read temperature from OT07 device FIFO register
-// char I2C address
-// returns TempResponse tempC = temperature in oC
-// status = register read result
-//******************************************************************************
-
-TempResponse get_temperature(char I2C_add){
- char data[2];
- double T;
- int count;
-
- // Read temperature from FIFO, 2 bytes
- int error = OT07_read_register(I2C_add,OT07_FIFO_DATA,data,2);
-
- //calculate temperture from data
- count = (int)(data[0]*256 + data[1]);
- if (count >= 32768)count = count - 65536; // 2s comp
- T = (double)count*0.005;
-
- TempResponse resp;
- resp.tempC = T;
- resp.status = error; // 1 for nack/error. 0 for ack/success
- return resp;
-}
-
-
-void write_settings_file(int interval, bool device_logged[MAX_DEVICES])
-{
- FILE *fp = fopen(settings_file, "w");
- if (fp != NULL)
- {
- fprintf(fp, "i %d\r\n", interval);
-
- fprintf(fp, "d");
-
- for(int i = 0; i < MAX_DEVICES; i++)
- {
- if(device_logged[i] == true)
- {
- fprintf(fp," %d", i);
- }
- }
- fprintf(fp,"\r\n");
-
- fclose(fp);
- }
- return;
-}
-
-void clear_log_file()
-{
- FILE *fp = fopen(log_file, "w");
- if (fp != NULL)
- {
- fclose(fp);
- }
- return;
-}
-
-bool print_settings_file()
-{
- FILE *fp = fopen(settings_file, "r");
- if (fp != NULL)
- {
- pc.printf("*\r\n");
-
- // Read contents from file
- char c = fgetc(fp);
-
- while (!feof(fp))
- {
- pc.printf("%c", c);
- c = fgetc(fp);
- }
-
- pc.printf("*\r\n");
-
- fclose(fp);
- }
- else
- {
- return false;
- }
- return true;
-}
-
-bool print_log_file()
-{
- FILE *fp = fopen(log_file, "r");
- if (fp != NULL)
- {
- pc.printf("*\r\n");
-
- // Read contents from file
- char c = fgetc(fp);
- while (!feof(fp))
- {
- pc.printf("%c", c);
- c = fgetc(fp);
- }
-
- pc.printf("*\r\n");
-
- fclose(fp);
- }
- else
- {
- return false;
- }
- return true;
-}
-
-int getline(char **lineptr, int *n, FILE *stream) {
- char *bufptr = NULL;
- char *p = bufptr;
- size_t size;
- int c;
-
- if (lineptr == NULL) {
- return -1;
- }
- if (stream == NULL) {
- return -1;
- }
- if (n == NULL) {
- return -1;
- }
- bufptr = *lineptr;
- size = *n;
-
- c = fgetc(stream);
- if (c == EOF) {
- return -1;
- }
- if (bufptr == NULL) {
- bufptr = (char *)malloc(128);
- if (bufptr == NULL) {
- return -1;
- }
- size = 128;
- }
- p = bufptr;
- while(c != EOF) {
- if ((p - bufptr) > (size - 1)) {
- size = size + 128;
- bufptr = (char *)realloc(bufptr, size);
- if (bufptr == NULL) {
- return -1;
- }
- }
- *p++ = c;
- if (c == '\n') {
- break;
- }
- c = fgetc(stream);
- }
-
- *p++ = '\0';
- *lineptr = bufptr;
- *n = size;
-
- return p - bufptr - 1;
-}
-
-bool print_settings_file_2()
-{
- char * line = NULL;
- int len = 0;
-
- FILE *fp = fopen(settings_file, "r");
- if (fp != NULL)
- {
- pc.printf("*\r\n");
-
- // Read contents from file
- while ((getline(&line, &len, fp)) != -1)
- {
- pc.printf("%s", line);
- }
- pc.printf("*\r\n");
-
- fclose(fp);
- }
- else
- {
- return false;
- }
- return true;
-}
-
-//returns true if settings file exists and is in the proper format
-bool apply_settings_file(bool (&logged_devices)[MAX_DEVICES], int& interval)
-{
-
- char * line = NULL;
- int len = 0;
- int line_number = 0;
-
-
- FILE *fp = fopen("/sd/settings.txt", "r");
- if (fp != NULL)
- {
-
- //initialize devices to all false;
- for(int i = 0; i < MAX_DEVICES; i++)
- {
- logged_devices[i] = false;
- }
-
- // Read contents from file
- while ((getline(&line, &len, fp)) != -1)
- {
- line_number++;
-
- char i = 0;
- char c = line[i];
- while(c != '\0')
- {
- int number;
- int n;
- sscanf((line+i), "%d%n", &number, &n);
- if(isdigit(c))
- {
- if(line_number == 1)
- {
- interval = number;
- }
- else if(line_number == 2)
- {
- logged_devices[number] = true;
- }
- if(n > 1)
- i = i + (n - 1);
- }
- i++;
- c = line[i];
- }
- }
-
- fclose(fp);
- }
- else
- {
- return false;
- }
-
- return true;
-
-}
//******************************************************************************
// main()
@@ -564,435 +181,495 @@
int main()
{
- OT07_struct OT07[4]; // structure that holds I2C address and ROM_ID
- char data[130];
- int device_count = 0; // number of OW devices found by search_rom()
- int i;
- int j;
- int k;
+ rLED = LED_OFF;
+ gLED = LED_OFF;
+ bLED = LED_OFF;
+
+
+ // Application to:
+ //1. Click Button to measure and display temperature.
+ //2. Click again to stop measure
+ //3. Repeat
+
+
+ pc.printf("Welcome tot the OT07 Test Program!\r\n");
+ pc.printf("Press the button to start measurement.\r\n");
+ pc.printf("Press one more time to stop.\r\n");
+
+ //************* init ticker timer callbacks ****************
+ timer_1.attach(&LED_blink_callback, 2); //LED3 toggles every 3 seconds
+
+ //************* init button interrupts ****************
+ button.fall(&btn_pressed);
+
+ char data[5];
+ char i2c_add = 0xA0;
+ TempResponse T;
- char device_id[ID_LENGTH]; //8 byte rom id of current slected device
- char rom_id_list[MAX_DEVICES][ID_LENGTH]; //List of rom id for each device on OW bus
-
- TempResponse T[MAX_DEVICES];
-
- bool device_logged[MAX_DEVICES];
- //initialize device_logged to all false;
- for(int i = 0; i < MAX_DEVICES; i++)
- {
- device_logged[i] = false;
- }
+ while (1) {
+
+// pc.printf("In loop.\r\n");
+
+
+ if (button_flag) {
+ pc.printf("The button is pressed.\r\n");
+ button_flag = false;
+
+ // Read OT07 register
+ int result = OT07_read_register(&i2c, i2c_add,0xff,data,1);
+ if(result) {
+ pc.printf("Read fail.\r\n");
+ } else {
+ pc.printf("Success!\r\n");
+ pc.printf("OT07 add[%02X] data[%02X]\r\n",0xff,data[0]); // should be 0x30
+ } // end of if(result)
+
+ for (int i = 0; i < 3; i++) {
+ convert_temperature(&i2c, i2c_add); //send OW convert selected device
+ wait_ms(CONVERT_T_DELAY); //wait 20 ms for convert temperature to complete
+ T = get_temperature(&i2c, i2c_add);
+ pc.printf("OT07 temperature[%.3f] status[%d]\r\n", T.tempC, T.status);
+ }
+
+ } // end of if (button_flag)
- // i/o variables
- char rx_buff[128]; // comport input buffer
- int rx_index; // rx_buffer pointer
- char c; // command type character
- int n; // argument count
- int arg1; // argumnet 1
- int arg2; // argument 2
- int device; // device argument
- int num_bytes;
+ } // end of while (1)
- int time_count;
- int log_interval = PERIOD;
- int time_to_sample;
-
- apply_settings_file(device_logged, log_interval);
-
- //************* init ticker timer callbacks ****************
- timer_1.attach(&LED_blink_callback,0.5); //start ticker, once per sec.
+} // end of main()
- i2c.frequency(400000); //set I2C clock to 400kHz
-
- rLED = LED_OFF;
- gLED = LED_ON;
- bLED = LED_ON;
-
- // ****************** search for all devices on bus *****************
-
- device_count = search_I2C_bus(OT07);
-
- rx_index = 0; //character buffer index for input from PC
-
- button.fall(&btn_pressed);
- SDInsert.fall(&sd_insert);
-
- sd.disk_initialize(); //initialize sd card
-
- while(1) { // start main loop, take data if logging, check for input, repeat
-
- if(sd_insert_flag == true)
- {
- sd.disk_initialize();
- sd_insert_flag = false;
- }
-
- if(button_flag == true)
- {
- if(log_flag == false){ //start logging
-
- if(SDDetect)//if SD card not detected
- {
- error_flag = true;
- error_ticks = 6;
- log_flag = false;
- }
- else
- {
- apply_settings_file(device_logged, log_interval);
-
- FILE *fp = fopen(log_file, "a");
- if (fp != NULL)
- {
- fprintf(fp,"Device List\r\n");
- fprintf(fp,"Device Number,Address,Unique ID\r\n");
- for(j=0;j<device_count;j++)
- {
- if(device_logged[j])
- {
- fprintf(fp,"%d,0x%02X,0x",j, OT07[j].I2C_address);
- for(i=ID_LENGTH-1;i>=0;i--)
- {
- fprintf(fp,"%02X",OT07[j].rom_id[i]);
- }
- fprintf(fp,"\r\n");
- }
- }
- fprintf(fp, "Temperature Log\r\n");
- fprintf(fp, "Time (s)");
-
- for(j=0;j<device_count;j++)
- {
- if(device_logged[j])
- fprintf(fp,",Device %d Temperature (C)",j);
- }
- fprintf(fp,"\r\n");
-
- fclose(fp);
- }
-
- time_count = 0;
-
- time_to_sample = 0; // force sample at time = 0;
- tick_flag = true; // force sample at time = 0;
- log_flag = true;
- }
- }else{
- log_flag = false;
- }
- button_flag = false;
- }
-
- while(tick_flag == false){ //check for input while waiting for next tick
-
- // ----------------------------------------------------------------------------
- // test for charater input for USB com port
- // ----------------------------------------------------------------------------
-
- //test if PC sent some charaters
- while(pc.readable()){ //characters in buffer, get them
- rx_buff[rx_index] = pc.getc();
-
- if(rx_buff[rx_index] == CR){
- rx_buff[++rx_index] = 0;
- rx_index = -1; // because i++ at end of while give i=0 on next loop
- device = 0;
- arg1 = 0;
- arg2 = 0;
-
- n = sscanf(rx_buff, " %c %d %x %x", &c, & device, &arg1, &arg2);
- //process input
- if(n > 0){//got input so process it
- switch(c){
- case 'a':
- case 'A':
- break;
- case 'c':
- case 'C':
- if(!SDDetect)
- pc.printf("y\r\n");
- else
- pc.printf("n\r\n");
- break;
- case 'd':
- case 'D':
- if(n==1) // if no device number is given
- {
- //clear device_logged array
- for(int i = 0; i < MAX_DEVICES; i++)
- {
- device_logged[i] = false;
- }
-
- write_settings_file(log_interval, device_logged);
- }
- if(n == 2)
- {
- device_logged[device] = true;
- write_settings_file(log_interval, device_logged);
- }
- break;
- case 'f':
- case 'F': //f is for "flash" for microSD
- if(!SDDetect)
- pc.printf("y\r\n");
- else
- pc.printf("n\r\n");
- break;
- case 'g':
- case 'G':
- if(n == 2)
- {
- //0 means get config, 1 means get log, 2 means clear log
- bool fileExists = false;
- if(device == 0)//get config
- {
- fileExists = print_settings_file();
- }
- if(device == 1)//get log
- {
- fileExists = print_log_file();
- }
- if(device == 2)//get log
- {
- clear_log_file();
- fileExists = true;
- }
- if(!fileExists)
- {
- pc.printf("no_file\r\n");
- }
- }
- // read all registers command
- //i.e. ("g 0 0" means readAll from device 0 "g 1 0" means readAll from device 1)
- if(n == 3)
- {
- //device holds device number 0 means readAll command
- OT07_read_register(OT07[device].I2C_address,0x00,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x00,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x01,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x01,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x04,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x04,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x05,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x05,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x06,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x06,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x07,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x07,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x08,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x08,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x09,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x09,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x0A,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x0A,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x0C,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x0C,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x10,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x10,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x11,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x11,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x12,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x12,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x13,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x13,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x14,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x14,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x20,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x20,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x21,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x21,data[0]);
- //OT07_read_register(OT07[device].I2C_address,0x30,data,1);
- //pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x30,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x31,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x31,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x32,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x32,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x33,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x33,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x34,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x34,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x35,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x35,data[0]);
- OT07_read_register(OT07[device].I2C_address,0x36,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x36,data[0]);
- //OT07_read_register(OT07[device].I2C_address,0x37,data,1);
- //pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x37,data[0]);
- OT07_read_register(OT07[device].I2C_address,0xFF,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0xFF,data[0]);
- }
- break;
- case 'i':
- case 'I': //Set Logging sample intreval in seconds
-
- log_interval = device;
- if(log_interval < 1)log_interval = 1;
- if(log_interval > 60)log_interval = 60;
- write_settings_file(log_interval, device_logged);
- break;
- case 'l':
- case 'L':
- /*
- // Toggle logging
-
- if(log_flag == false){ //start logging
- if(SDDetect)//if SD card not detected
- {
- error_flag = true;
- error_ticks = 6;
- log_flag = false;
- }
- else
- {
- FILE *fp = fopen(log_file, "a");
- if (fp != NULL)
- {
- fprintf(fp, "Time(s)");
-
- for(j=0;j<device_count;j++)
- {
- fprintf(fp,",Device %d Temperature (C)",j);
- }
- fprintf(fp,"\r\n");
-
- fclose(fp);
- }
-
- time_count = 0;
-
- time_to_sample = 0; // force sample at time = 0;
- tick_flag = true; // force sample at time = 0;
- log_flag = true;
- }
- }else{
- //pc.printf("<stop logging>\r\n");
- log_flag = false;
- }*/
- break;
- case 'r':
- case 'R':
- //read register "r device radd.start radd.end"
- if(n==3){ //read single register from selected device
- OT07_read_register(OT07[device].I2C_address,arg1,data,1);
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,arg1,data[0]);
- }
- if(n==4){ //read a range of regesters from selected device
- num_bytes = arg2-arg1 + 1; // calculate number of bytes to read
- if (num_bytes < 1) num_bytes = 1; // if arg2 <= arg 1 just read arg1 address.
- OT07_read_register(OT07[device].I2C_address,arg1,data,num_bytes);
- for(i=0;i<num_bytes;i++){
- pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,arg1+i,data[i]);
- }
- }
- break;
-
- case 's':
- case 'S':
- // ****************** search for I2C devices on bus *****************
- device_count = search_I2C_bus(OT07);
- pc.printf("%d devices:\r\n", device_count);
- for(j=0;j<device_count;j++){
- pc.printf("device[%02X] addr[%02X] unique id[",j, OT07[j].I2C_address);
- for(i=ID_LENGTH-1;i>=0;i--){
- pc.printf("%02X",OT07[j].rom_id[i]);
- }
- pc.printf("]\r\n");
- }
-
- break;
-
- case 'T':
- case 't':
-
- if(n == 2){//get temperatures from selected device
-
- convert_temperature(OT07[device].I2C_address); //send OW convert selected device
- wait_ms(CONVERT_T_DELAY); //wait 20 ms for convert temperature to complete
- T[device] = get_temperature(OT07[device].I2C_address);
- pc.printf("device[%02X] temperature[%.3f] status[%d]\r\n",device,T[device].tempC, T[device].status);
- }
-
- if(n == 3){ // "t 1 3" get temperature for devices 1 thru 3
- //sprintf(str,"%x",arg1); //convert arg1 input as hex to decimal i.e. 0x10 becomes 10 dec
- //sscanf(str,"%d",&arg1);
- //IS THIS NEEDED? ^^^
-
- for(j=device;j<=arg1;j++){
- convert_temperature(OT07[j].I2C_address); //send convert to all devices
- wait_ms(CONVERT_T_DELAY); //wait 20ms for convert temperature to complete
- T[j] = get_temperature(OT07[j].I2C_address);
- }
-
- for(j=device;j<=arg1;j++){
- pc.printf("device[%02X] temperature[%.3f] status[%d]\r\n",j,T[j].tempC, T[j].status);
- }
- }
-
- break;
-
- case 'w':
- case 'W': //write register "w device w.addr data"
-
- OT07_write_register(OT07[device].I2C_address,arg1, arg2);
- pc.printf("write -- device[%02X] add[%02X] data[%02X]\r\n",device,arg1,arg2);
- break;
-
- case 'x':
- case 'X': // experimental modes
- break;
-
-
- }//end switch(c)
- }//if(n>0)
- }//end if(CR)
- if(rx_buff[rx_index] == BS){//backspace received, back up buffer pointer
- if(rx_index>0)rx_index--;//remove last char from buffer if not at start.
- }else rx_index++;
- }//end while(pc.redable())
- wait_ms(100); // slow down polling
-
- }// end (while tick == false)
- tick_flag = false; // set to false for next time
-
- // only reached when tick_flag = true otherwise stuck in pc.readable() loop
- if(log_flag == true){
- if(time_count >= time_to_sample){ //take next sample
- time_to_sample += log_interval; // calculate time for next sample
-
- for(j=0;j<device_count;j++){
- convert_temperature(OT07[j].I2C_address);
- wait_ms(CONVERT_T_DELAY); //wait 20ms for convert temperature to complete
- T[j] = get_temperature(OT07[j].I2C_address);
- }
- /////////////////////////////////////////////////////////////////////////////////////////////////
-
- //open file for microSD logging
- FILE *fp = fopen(log_file, "a");
- if (fp != NULL)
- {
- //fprintf(fp, "\n");
- fprintf(fp, "%d",time_count);
- for(j=0;j<device_count;j++)
- {
- if(device_logged[j])
- {
- if(T[j].status == DEVICE_ACK)
- fprintf(fp,",%.3f",T[j].tempC);
- else
- fprintf(fp,",---.---");
- }
-
- }
- fprintf(fp,"\r\n");
-
- fclose(fp);
- }
- }// end if(time_count >= time_to_sample)
- time_count ++; //
-
- }// end if(log_flag)
-
- }//end while(1)
-}
+//int main()
+//{
+// OT07_struct OT07[4]; // structure that holds I2C address and ROM_ID
+// char data[130];
+// int device_count = 0; // number of OW devices found by search_rom()
+// int i;
+// int j;
+// int k;
+//
+//
+// char device_id[ID_LENGTH]; //8 byte rom id of current slected device
+// char rom_id_list[MAX_DEVICES][ID_LENGTH]; //List of rom id for each device on OW bus
+//
+// TempResponse T[MAX_DEVICES];
+//
+// bool device_logged[MAX_DEVICES];
+// //initialize device_logged to all false;
+// for(int i = 0; i < MAX_DEVICES; i++)
+// {
+// device_logged[i] = false;
+// }
+//
+// // i/o variables
+// char rx_buff[128]; // comport input buffer
+// int rx_index; // rx_buffer pointer
+// char c; // command type character
+// int n; // argument count
+// int arg1; // argumnet 1
+// int arg2; // argument 2
+// int device; // device argument
+// int num_bytes;
+//
+// int time_count;
+// int log_interval = PERIOD;
+// int time_to_sample;
+//
+// apply_settings_file(device_logged, log_interval);
+//
+// //************* init ticker timer callbacks ****************
+// timer_1.attach(&LED_blink_callback,0.5); //start ticker, once per sec.
+//
+//
+// i2c.frequency(400000); //set I2C clock to 400kHz
+//
+// rLED = LED_OFF;
+// gLED = LED_ON;
+// bLED = LED_ON;
+//
+// // ****************** search for all devices on bus *****************
+//
+// device_count = search_I2C_bus(OT07);
+//
+// rx_index = 0; //character buffer index for input from PC
+//
+// button.fall(&btn_pressed);
+// SDInsert.fall(&sd_insert);
+//
+// sd.disk_initialize(); //initialize sd card
+//
+// while(1) { // start main loop, take data if logging, check for input, repeat
+//
+// if(sd_insert_flag == true)
+// {
+// sd.disk_initialize();
+// sd_insert_flag = false;
+// }
+//
+// if(button_flag == true)
+// {
+// if(log_flag == false){ //start logging
+//
+// if(SDDetect)//if SD card not detected
+// {
+// error_flag = true;
+// error_ticks = 6;
+// log_flag = false;
+// }
+// else
+// {
+// apply_settings_file(device_logged, log_interval);
+//
+// FILE *fp = fopen(log_file, "a");
+// if (fp != NULL)
+// {
+// fprintf(fp,"Device List\r\n");
+// fprintf(fp,"Device Number,Address,Unique ID\r\n");
+// for(j=0;j<device_count;j++)
+// {
+// if(device_logged[j])
+// {
+// fprintf(fp,"%d,0x%02X,0x",j, OT07[j].I2C_address);
+// for(i=ID_LENGTH-1;i>=0;i--)
+// {
+// fprintf(fp,"%02X",OT07[j].rom_id[i]);
+// }
+// fprintf(fp,"\r\n");
+// }
+// }
+// fprintf(fp, "Temperature Log\r\n");
+// fprintf(fp, "Time (s)");
+//
+// for(j=0;j<device_count;j++)
+// {
+// if(device_logged[j])
+// fprintf(fp,",Device %d Temperature (C)",j);
+// }
+// fprintf(fp,"\r\n");
+//
+// fclose(fp);
+// }
+//
+// time_count = 0;
+//
+// time_to_sample = 0; // force sample at time = 0;
+// tick_flag = true; // force sample at time = 0;
+// log_flag = true;
+// }
+// }else{
+// log_flag = false;
+// }
+// button_flag = false;
+// }
+//
+// while(tick_flag == false){ //check for input while waiting for next tick
+//
+// // ----------------------------------------------------------------------------
+// // test for charater input for USB com port
+// // ----------------------------------------------------------------------------
+//
+// //test if PC sent some charaters
+// while(pc.readable()){ //characters in buffer, get them
+// rx_buff[rx_index] = pc.getc();
+//
+// if(rx_buff[rx_index] == CR){
+// rx_buff[++rx_index] = 0;
+// rx_index = -1; // because i++ at end of while give i=0 on next loop
+// device = 0;
+// arg1 = 0;
+// arg2 = 0;
+//
+// n = sscanf(rx_buff, " %c %d %x %x", &c, & device, &arg1, &arg2);
+// //process input
+// if(n > 0){//got input so process it
+// switch(c){
+// case 'a':
+// case 'A':
+// break;
+// case 'c':
+// case 'C':
+// if(!SDDetect)
+// pc.printf("y\r\n");
+// else
+// pc.printf("n\r\n");
+// break;
+// case 'd':
+// case 'D':
+// if(n==1) // if no device number is given
+// {
+// //clear device_logged array
+// for(int i = 0; i < MAX_DEVICES; i++)
+// {
+// device_logged[i] = false;
+// }
+//
+// write_settings_file(log_interval, device_logged);
+// }
+// if(n == 2)
+// {
+// device_logged[device] = true;
+// write_settings_file(log_interval, device_logged);
+// }
+// break;
+// case 'f':
+// case 'F': //f is for "flash" for microSD
+// if(!SDDetect)
+// pc.printf("y\r\n");
+// else
+// pc.printf("n\r\n");
+// break;
+// case 'g':
+// case 'G':
+// if(n == 2)
+// {
+// //0 means get config, 1 means get log, 2 means clear log
+// bool fileExists = false;
+// if(device == 0)//get config
+// {
+// fileExists = print_settings_file();
+// }
+// if(device == 1)//get log
+// {
+// fileExists = print_log_file();
+// }
+// if(device == 2)//get log
+// {
+// clear_log_file();
+// fileExists = true;
+// }
+// if(!fileExists)
+// {
+// pc.printf("no_file\r\n");
+// }
+// }
+// // read all registers command
+// //i.e. ("g 0 0" means readAll from device 0 "g 1 0" means readAll from device 1)
+// if(n == 3)
+// {
+// //device holds device number 0 means readAll command
+// OT07_read_register(OT07[device].I2C_address,0x00,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x00,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x01,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x01,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x04,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x04,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x05,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x05,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x06,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x06,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x07,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x07,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x08,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x08,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x09,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x09,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x0A,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x0A,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x0C,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x0C,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x10,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x10,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x11,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x11,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x12,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x12,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x13,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x13,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x14,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x14,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x20,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x20,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x21,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x21,data[0]);
+// //OT07_read_register(OT07[device].I2C_address,0x30,data,1);
+// //pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x30,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x31,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x31,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x32,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x32,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x33,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x33,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x34,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x34,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x35,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x35,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0x36,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x36,data[0]);
+// //OT07_read_register(OT07[device].I2C_address,0x37,data,1);
+// //pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0x37,data[0]);
+// OT07_read_register(OT07[device].I2C_address,0xFF,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,0xFF,data[0]);
+// }
+// break;
+// case 'i':
+// case 'I': //Set Logging sample intreval in seconds
+//
+// log_interval = device;
+// if(log_interval < 1)log_interval = 1;
+// if(log_interval > 60)log_interval = 60;
+// write_settings_file(log_interval, device_logged);
+// break;
+// case 'l':
+// case 'L':
+// /*
+// // Toggle logging
+//
+// if(log_flag == false){ //start logging
+// if(SDDetect)//if SD card not detected
+// {
+// error_flag = true;
+// error_ticks = 6;
+// log_flag = false;
+// }
+// else
+// {
+// FILE *fp = fopen(log_file, "a");
+// if (fp != NULL)
+// {
+// fprintf(fp, "Time(s)");
+//
+// for(j=0;j<device_count;j++)
+// {
+// fprintf(fp,",Device %d Temperature (C)",j);
+// }
+// fprintf(fp,"\r\n");
+//
+// fclose(fp);
+// }
+//
+// time_count = 0;
+//
+// time_to_sample = 0; // force sample at time = 0;
+// tick_flag = true; // force sample at time = 0;
+// log_flag = true;
+// }
+// }else{
+// //pc.printf("<stop logging>\r\n");
+// log_flag = false;
+// }*/
+// break;
+// case 'r':
+// case 'R':
+// //read register "r device radd.start radd.end"
+// if(n==3){ //read single register from selected device
+// OT07_read_register(OT07[device].I2C_address,arg1,data,1);
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,arg1,data[0]);
+// }
+// if(n==4){ //read a range of regesters from selected device
+// num_bytes = arg2-arg1 + 1; // calculate number of bytes to read
+// if (num_bytes < 1) num_bytes = 1; // if arg2 <= arg 1 just read arg1 address.
+// OT07_read_register(OT07[device].I2C_address,arg1,data,num_bytes);
+// for(i=0;i<num_bytes;i++){
+// pc.printf("device[%02X] add[%02X] data[%02X]\r\n",device,arg1+i,data[i]);
+// }
+// }
+// break;
+//
+// case 's':
+// case 'S':
+// // ****************** search for I2C devices on bus *****************
+// device_count = search_I2C_bus(OT07);
+// pc.printf("%d devices:\r\n", device_count);
+// for(j=0;j<device_count;j++){
+// pc.printf("device[%02X] addr[%02X] unique id[",j, OT07[j].I2C_address);
+// for(i=ID_LENGTH-1;i>=0;i--){
+// pc.printf("%02X",OT07[j].rom_id[i]);
+// }
+// pc.printf("]\r\n");
+// }
+//
+// break;
+//
+// case 'T':
+// case 't':
+//
+// if(n == 2){//get temperatures from selected device
+//
+// convert_temperature(OT07[device].I2C_address); //send OW convert selected device
+// wait_ms(CONVERT_T_DELAY); //wait 20 ms for convert temperature to complete
+// T[device] = get_temperature(OT07[device].I2C_address);
+// pc.printf("device[%02X] temperature[%.3f] status[%d]\r\n",device,T[device].tempC, T[device].status);
+// }
+//
+// if(n == 3){ // "t 1 3" get temperature for devices 1 thru 3
+// //sprintf(str,"%x",arg1); //convert arg1 input as hex to decimal i.e. 0x10 becomes 10 dec
+// //sscanf(str,"%d",&arg1);
+// //IS THIS NEEDED? ^^^
+//
+// for(j=device;j<=arg1;j++){
+// convert_temperature(OT07[j].I2C_address); //send convert to all devices
+// wait_ms(CONVERT_T_DELAY); //wait 20ms for convert temperature to complete
+// T[j] = get_temperature(OT07[j].I2C_address);
+// }
+//
+// for(j=device;j<=arg1;j++){
+// pc.printf("device[%02X] temperature[%.3f] status[%d]\r\n",j,T[j].tempC, T[j].status);
+// }
+// }
+//
+// break;
+//
+// case 'w':
+// case 'W': //write register "w device w.addr data"
+//
+// OT07_write_register(OT07[device].I2C_address,arg1, arg2);
+// pc.printf("write -- device[%02X] add[%02X] data[%02X]\r\n",device,arg1,arg2);
+// break;
+//
+// case 'x':
+// case 'X': // experimental modes
+// break;
+//
+//
+// }//end switch(c)
+// }//if(n>0)
+// }//end if(CR)
+// if(rx_buff[rx_index] == BS){//backspace received, back up buffer pointer
+// if(rx_index>0)rx_index--;//remove last char from buffer if not at start.
+// }else rx_index++;
+// }//end while(pc.redable())
+// wait_ms(100); // slow down polling
+//
+// }// end (while tick == false)
+// tick_flag = false; // set to false for next time
+//
+// // only reached when tick_flag = true otherwise stuck in pc.readable() loop
+// if(log_flag == true){
+// if(time_count >= time_to_sample){ //take next sample
+// time_to_sample += log_interval; // calculate time for next sample
+//
+// for(j=0;j<device_count;j++){
+// convert_temperature(OT07[j].I2C_address);
+// wait_ms(CONVERT_T_DELAY); //wait 20ms for convert temperature to complete
+// T[j] = get_temperature(OT07[j].I2C_address);
+// }
+// /////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// //open file for microSD logging
+// FILE *fp = fopen(log_file, "a");
+// if (fp != NULL)
+// {
+// //fprintf(fp, "\n");
+// fprintf(fp, "%d",time_count);
+// for(j=0;j<device_count;j++)
+// {
+// if(device_logged[j])
+// {
+// if(T[j].status == DEVICE_ACK)
+// fprintf(fp,",%.3f",T[j].tempC);
+// else
+// fprintf(fp,",---.---");
+// }
+//
+// }
+// fprintf(fp,"\r\n");
+//
+// fclose(fp);
+// }
+// }// end if(time_count >= time_to_sample)
+// time_count ++; //
+//
+// }// end if(log_flag)
+//
+// }//end while(1)
+//}