Debugged library and example main

Dependencies:   MX106_not_working mbed-src AX12_final comunication_1

Fork of MX106-custom by Team DIANA

Revision:
11:19e8022f60ea
Parent:
10:2acfa1a84c96
diff -r 2acfa1a84c96 -r 19e8022f60ea main.cpp
--- a/main.cpp	Sat Jul 02 18:06:59 2016 +0000
+++ b/main.cpp	Wed Jul 13 15:53:34 2016 +0000
@@ -2,6 +2,10 @@
 #include "communication_1.h"
 #include "MX106.h"
 #include "MX64.h"
+#include <stdio.h>
+#include <string.h>
+
+#define MAX_JOINT 3 
 
 /*Connessioni jupers millefori/nucleo: 
     - rosso 5V
@@ -13,8 +17,138 @@
 Serial pc(USBTX, USBRX);
 communication_1 wire(PA_9, PA_10, 9600);
 MX106 motor_21(wire, 21, 1);
-MX64 motor_22(wire, 22, 1);
+MX106 motor_22(wire, 22, 1);
+MX106 motor_14(wire, 14, 1);
    
 int main() {  
-   pc.printf("Start run! \n");
+   //pc.printf("Start run! \n");
+   wire.trigger();
+   wire.trigger();
+   wire.trigger();
+   wire.trigger();
+   
+   //printf("asking volts\n");
+   //float volts = motor_21.getVolts();
+   //printf("volts: %f\n", volts);
+   
+   motor_21.setMotorEnabled(1);
+
+   //printf("set continuous rotation mode\n");
+   //motor_21.setMode(0);
+   //printf("set speed\n");
+   //motor_21.setSpeed(180);
+   //printf("speed set\n");
+
+
+   //printf("set multiturn mode\n");
+   //motor_21.setMode(2);
+   //printf("asking pos\n");
+   //float pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+   //motor_21.setSpeed(90);
+   //float wait_time = 5;
+   //motor_21.setGoalPosition(0);
+   //wait(10);
+   //float targets[7] = {0, 90, 180, 270, 180, 360, 720};
+   //for (int i = 0; i < 7; i++) {
+     //motor_21.setGoalPosition(targets[i]);
+     //wait(wait_time);
+   //}
+   //printf("asking pos after move\n");
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+
+   Joint* joint_21 = &motor_21;
+
+   float pos;
+   //joint_21->setMaxSpeed(360*3/2);
+   //joint_21->setSpeed(90);
+   //wait(3);
+   //joint_21->setSpeed(0);
+   //wait(1);
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+   
+
+   //joint_21->setCWLimit(90);
+   //joint_21->setCCWLimit(-90);
+   //joint_21->setGoalPosition(0); 
+   //wait(5);
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+
+   //joint_21->setGoalPosition(80); 
+   //wait(5);
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+
+   //joint_21->setGoalPosition(130); 
+   //wait(5);
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+
+   //joint_21->setGoalPosition(-130); 
+   //wait(5);
+   //pos = motor_21.getPosition();
+   //printf(" pos : %f \n", pos);
+   //
+   //
+   
+   Joint* joints[MAX_JOINT];
+   joints[0] = &motor_21;
+   joints[1] = &motor_22;
+   joints[2] = &motor_14;
+
+   // comandi
+   char buf[200];
+   uint8_t current_motor = 0; 
+
+   while(1) {
+     printf("\n insert command: \n");
+     if(pc.gets(buf, 200)) {
+       char command[3];
+       strncpy(command, buf, 2);
+       command[2]='\0';
+
+       if(strcmp(command, "ID")  == 0) {
+         int id;
+         if(sscanf(buf, "ID %d", &id) != 1) {
+           printf("\n bad ID command \n");
+         };
+         bool found = false;
+         for(int i =0; i< MAX_JOINT && !found; i++) {
+           int nid = joints[i]->getID();
+           printf("found motor with id %d\n", nid);
+           if(id == nid) {
+             printf("\nusing motor %d - ID: %d", i, id);
+             current_motor = i;
+             found = true;
+             break;
+           } 
+         }
+         if(!found) {
+           printf("\nmotor with ID: %d not found", id);
+         }
+       } else if(strcmp(command, "GO") == 0) {
+         float posDegrees;
+         if(sscanf(buf, "GO %f", &posDegrees) != 1) {
+           printf("\n bad GO command \n");
+           break;
+         }
+         joints[current_motor]->setGoalPosition(posDegrees);
+       } else if(strcmp(command, "SP") == 0) {
+         float speed;
+         if(sscanf(buf, "SP %f", &speed) != 1) {
+           printf("\n bad SP command \n");
+           break;
+         }
+         joints[current_motor]->setSpeed(speed);
+       } else {
+         printf("\n unknown command: \"\s\" \n", buf);
+       }
+
+
+     };
+   }
+
 }