TUKS MCU Introductory course
/
TUKS-COURSE-TIMER
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: HAL_L476/stm32l4xx_ll_rcc.c
- Revision:
- 1:d0dfbce63a89
diff -r a9bbfbd216e8 -r d0dfbce63a89 HAL_L476/stm32l4xx_ll_rcc.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HAL_L476/stm32l4xx_ll_rcc.c Fri Feb 24 21:13:56 2017 +0000
@@ -0,0 +1,1495 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_rcc.c
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief RCC LL module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_ll_rcc.h"
+#ifdef USE_FULL_ASSERT
+ #include "stm32_assert.h"
+#else
+ #define assert_param(expr) ((void)0U)
+#endif
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @addtogroup RCC_LL
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup RCC_LL_Private_Macros
+ * @{
+ */
+#if defined(RCC_CCIPR_USART3SEL)
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART3_CLKSOURCE))
+#else
+#define IS_LL_RCC_USART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USART1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_USART2_CLKSOURCE))
+
+#endif /* RCC_CCIPR_USART3SEL */
+#if defined(RCC_CCIPR_UART4SEL) && defined(RCC_CCIPR_UART5SEL)
+#define IS_LL_RCC_UART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_UART4_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_UART5_CLKSOURCE))
+#elif defined(RCC_CCIPR_UART4SEL)
+#define IS_LL_RCC_UART_INSTANCE(__VALUE__) ((__VALUE__) == LL_RCC_UART4_CLKSOURCE)
+#elif defined(RCC_CCIPR_UART5SEL)
+#define IS_LL_RCC_UART_INSTANCE(__VALUE__) ((__VALUE__) == LL_RCC_UART5_CLKSOURCE)
+#endif /* RCC_CCIPR_UART4SEL && RCC_CCIPR_UART5SEL*/
+
+#define IS_LL_RCC_LPUART_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPUART1_CLKSOURCE))
+
+#if defined(RCC_CCIPR_I2C2SEL)&&defined(RCC_CCIPR_I2C3SEL)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C2_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE))
+
+#elif !defined(RCC_CCIPR_I2C2SEL)&&defined(RCC_CCIPR_I2C3SEL)
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_I2C1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_I2C3_CLKSOURCE))
+
+#else
+#define IS_LL_RCC_I2C_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_I2C1_CLKSOURCE)
+
+#endif /* RCC_CCIPR_I2C2SEL && RCC_CCIPR_I2C3SEL */
+#define IS_LL_RCC_LPTIM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_LPTIM1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_LPTIM2_CLKSOURCE))
+
+#if defined(RCC_CCIPR_SAI2SEL)
+#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SAI1_CLKSOURCE) \
+ || ((__VALUE__) == LL_RCC_SAI2_CLKSOURCE))
+#else
+#define IS_LL_RCC_SAI_CLKSOURCE(__VALUE__) ((__VALUE__) == LL_RCC_SAI1_CLKSOURCE)
+#endif /* RCC_CCIPR_SAI2SEL */
+
+#define IS_LL_RCC_SDMMC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SDMMC1_CLKSOURCE))
+
+#define IS_LL_RCC_RNG_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_RNG_CLKSOURCE))
+
+#if defined(USB_OTG_FS) || defined(USB)
+#define IS_LL_RCC_USB_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_USB_CLKSOURCE))
+#endif /* USB_OTG_FS || USB */
+
+#define IS_LL_RCC_ADC_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_ADC_CLKSOURCE))
+
+#define IS_LL_RCC_SWPMI_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_SWPMI1_CLKSOURCE))
+
+#define IS_LL_RCC_DFSDM_CLKSOURCE(__VALUE__) (((__VALUE__) == LL_RCC_DFSDM1_CLKSOURCE))
+
+/**
+ * @}
+ */
+
+/* Private function prototypes -----------------------------------------------*/
+/** @defgroup RCC_LL_Private_Functions RCC Private functions
+ * @{
+ */
+uint32_t RCC_GetSystemClockFreq(void);
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency);
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency);
+uint32_t RCC_PLL_GetFreqDomain_SYS(void);
+uint32_t RCC_PLL_GetFreqDomain_SAI(void);
+uint32_t RCC_PLL_GetFreqDomain_48M(void);
+uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void);
+uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void);
+uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void);
+#if defined(RCC_PLLSAI2_SUPPORT)
+uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void);
+uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void);
+#endif /*RCC_PLLSAI2_SUPPORT*/
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_LL_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_LL_EF_Init
+ * @{
+ */
+
+/**
+ * @brief Reset the RCC clock configuration to the default reset state.
+ * @note The default reset state of the clock configuration is given below:
+ * - MSI ON and used as system clock source
+ * - HSE, HSI, PLL and PLLSAIxSource OFF
+ * - AHB, APB1 and APB2 prescaler set to 1.
+ * - CSS, MCO OFF
+ * - All interrupts disabled
+ * @note This function doesn't modify the configuration of the
+ * - Peripheral clocks
+ * - LSI, LSE and RTC clocks
+ * @retval An ErrorStatus enumeration value:
+ * - SUCCESS: RCC registers are de-initialized
+ * - ERROR: not applicable
+ */
+ErrorStatus LL_RCC_DeInit(void)
+{
+ uint32_t vl_mask = 0;
+
+ /* Set MSION bit */
+ LL_RCC_MSI_Enable();
+
+ /* Insure MSIRDY bit is set before writing default MSIRANGE value */
+ while (LL_RCC_MSI_IsReady() == 0)
+ {
+ __NOP();
+ }
+
+ /* Set MSIRANGE default value */
+ LL_RCC_MSI_SetRange(LL_RCC_MSIRANGE_6);
+ /* Set MSITRIM bits to the reset value*/
+ LL_RCC_MSI_SetCalibTrimming(0);
+
+ /* Set HSITRIM bits to the reset value*/
+ LL_RCC_HSI_SetCalibTrimming(0x10);
+
+ /* Reset CFGR register */
+ LL_RCC_WriteReg(CFGR, 0x00000000);
+
+ vl_mask = 0xFFFFFFFFU;
+
+ /* Reset HSION, HSIKERON, HSIASFS, HSEON, PLLSYSON bits */
+ CLEAR_BIT(vl_mask, (RCC_CR_HSION | RCC_CR_HSIASFS | RCC_CR_HSIKERON | RCC_CR_HSEON |
+ RCC_CR_PLLON));
+
+ /* Reset PLLSAI1ON bit */
+ CLEAR_BIT(vl_mask, RCC_CR_PLLSAI1ON);
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+ /* Reset PLLSAI2ON bit */
+ CLEAR_BIT(vl_mask, RCC_CR_PLLSAI2ON);
+#endif /*RCC_PLLSAI2_SUPPORT*/
+
+ /* Write new mask in CR register */
+ LL_RCC_WriteReg(CR, vl_mask);
+
+ /* Reset PLLCFGR register */
+ LL_RCC_WriteReg(PLLCFGR, 16 << RCC_POSITION_PLLN);
+
+ /* Reset PLLSAI1CFGR register */
+ LL_RCC_WriteReg(PLLSAI1CFGR, 16 << RCC_POSITION_PLLSAI1N);
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+ /* Reset PLLSAI2CFGR register */
+ LL_RCC_WriteReg(PLLSAI2CFGR, 16 << RCC_POSITION_PLLSAI2N);
+#endif /*RCC_PLLSAI2_SUPPORT*/
+
+ /* Reset HSEBYP bit */
+ LL_RCC_HSE_DisableBypass();
+
+ /* Disable all interrupts */
+ LL_RCC_WriteReg(CIER, 0x00000000);
+
+ return SUCCESS;
+}
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_EF_Get_Freq
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * and different peripheral clocks available on the device.
+ * @note If SYSCLK source is MSI, function returns values based on MSI_VALUE(*)
+ * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(**)
+ * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(***)
+ * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(***)
+ * or HSI_VALUE(**) or MSI_VALUE(*) multiplied/divided by the PLL factors.
+ * @note (*) MSI_VALUE is a constant defined in this file (default value
+ * 4 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (**) HSI_VALUE is a constant defined in this file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ * @note (***) HSE_VALUE is a constant defined in this file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ * @note The result of this function could be incorrect when using fractional
+ * value for HSE crystal.
+ * @note This function can be used by the user application to compute the
+ * baud-rate for the communication peripherals or configure other parameters.
+ * @{
+ */
+
+/**
+ * @brief Return the frequencies of different on chip clocks; System, AHB, APB1 and APB2 buses clocks
+ * @note Each time SYSCLK, HCLK, PCLK1 and/or PCLK2 clock changes, this function
+ * must be called to update structure fields. Otherwise, any
+ * configuration based on this function will be incorrect.
+ * @param RCC_Clocks pointer to a @ref LL_RCC_ClocksTypeDef structure which will hold the clocks frequencies
+ * @retval None
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks)
+{
+ /* Get SYSCLK frequency */
+ RCC_Clocks->SYSCLK_Frequency = RCC_GetSystemClockFreq();
+
+ /* HCLK clock frequency */
+ RCC_Clocks->HCLK_Frequency = RCC_GetHCLKClockFreq(RCC_Clocks->SYSCLK_Frequency);
+
+ /* PCLK1 clock frequency */
+ RCC_Clocks->PCLK1_Frequency = RCC_GetPCLK1ClockFreq(RCC_Clocks->HCLK_Frequency);
+
+ /* PCLK2 clock frequency */
+ RCC_Clocks->PCLK2_Frequency = RCC_GetPCLK2ClockFreq(RCC_Clocks->HCLK_Frequency);
+}
+
+/**
+ * @brief Return USARTx clock frequency
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval USART clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource)
+{
+ uint32_t usart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USART_CLKSOURCE(USARTxSource));
+
+ if (USARTxSource == LL_RCC_USART1_CLKSOURCE)
+ {
+ /* USART1CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART1_CLKSOURCE_SYSCLK: /* USART1 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_HSI: /* USART1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_LSE: /* USART1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART1_CLKSOURCE_PCLK2: /* USART1 Clock is PCLK2 */
+ default:
+ usart_frequency = RCC_GetPCLK2ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else if (USARTxSource == LL_RCC_USART2_CLKSOURCE)
+ {
+ /* USART2CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART2_CLKSOURCE_SYSCLK: /* USART2 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_HSI: /* USART2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_LSE: /* USART2 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART2_CLKSOURCE_PCLK1: /* USART2 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else
+ {
+#if defined(RCC_CCIPR_USART3SEL)
+ if (USARTxSource == LL_RCC_USART3_CLKSOURCE)
+ {
+ /* USART3CLK clock frequency */
+ switch (LL_RCC_GetUSARTClockSource(USARTxSource))
+ {
+ case LL_RCC_USART3_CLKSOURCE_SYSCLK: /* USART3 Clock is System Clock */
+ usart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_HSI: /* USART3 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ usart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_LSE: /* USART3 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ usart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_USART3_CLKSOURCE_PCLK1: /* USART3 Clock is PCLK1 */
+ default:
+ usart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* RCC_CCIPR_USART3SEL */
+ }
+ return usart_frequency;
+}
+
+#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL)
+/**
+ * @brief Return UARTx clock frequency
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @retval UART clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource)
+{
+ uint32_t uart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_UART_CLKSOURCE(UARTxSource));
+
+#if defined(RCC_CCIPR_UART4SEL)
+ if (UARTxSource == LL_RCC_UART4_CLKSOURCE)
+ {
+ /* UART4CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART4_CLKSOURCE_SYSCLK: /* UART4 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_HSI: /* UART4 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_LSE: /* UART4 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART4_CLKSOURCE_PCLK1: /* UART4 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* RCC_CCIPR_UART4SEL */
+
+#if defined(RCC_CCIPR_UART5SEL)
+ if (UARTxSource == LL_RCC_UART5_CLKSOURCE)
+ {
+ /* UART5CLK clock frequency */
+ switch (LL_RCC_GetUARTClockSource(UARTxSource))
+ {
+ case LL_RCC_UART5_CLKSOURCE_SYSCLK: /* UART5 Clock is System Clock */
+ uart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_HSI: /* UART5 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ uart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_LSE: /* UART5 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ uart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_UART5_CLKSOURCE_PCLK1: /* UART5 Clock is PCLK1 */
+ default:
+ uart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /* RCC_CCIPR_UART5SEL */
+
+ return uart_frequency;
+}
+#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */
+
+/**
+ * @brief Return I2Cx clock frequency
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE
+ * @retval I2C clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that HSI oscillator is not ready
+ */
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource)
+{
+ uint32_t i2c_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_I2C_CLKSOURCE(I2CxSource));
+
+ if (I2CxSource == LL_RCC_I2C1_CLKSOURCE)
+ {
+ /* I2C1 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C1_CLKSOURCE_SYSCLK: /* I2C1 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C1_CLKSOURCE_HSI: /* I2C1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C1_CLKSOURCE_PCLK1: /* I2C1 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#if defined(RCC_CCIPR_I2C2SEL)
+ else if (I2CxSource == LL_RCC_I2C2_CLKSOURCE)
+ {
+ /* I2C2 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C2_CLKSOURCE_SYSCLK: /* I2C2 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C2_CLKSOURCE_HSI: /* I2C2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C2_CLKSOURCE_PCLK1: /* I2C2 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+#endif /*RCC_CCIPR_I2C2SEL*/
+ else
+ {
+ if (I2CxSource == LL_RCC_I2C3_CLKSOURCE)
+ {
+ /* I2C3 CLK clock frequency */
+ switch (LL_RCC_GetI2CClockSource(I2CxSource))
+ {
+ case LL_RCC_I2C3_CLKSOURCE_SYSCLK: /* I2C3 Clock is System Clock */
+ i2c_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_I2C3_CLKSOURCE_HSI: /* I2C3 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ i2c_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_I2C3_CLKSOURCE_PCLK1: /* I2C3 Clock is PCLK1 */
+ default:
+ i2c_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ }
+
+ return i2c_frequency;
+}
+
+/**
+ * @brief Return LPUARTx clock frequency
+ * @param LPUARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE
+ * @retval LPUART clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource)
+{
+ uint32_t lpuart_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_LPUART_CLKSOURCE(LPUARTxSource));
+
+ /* LPUART1CLK clock frequency */
+ switch (LL_RCC_GetLPUARTClockSource(LPUARTxSource))
+ {
+ case LL_RCC_LPUART1_CLKSOURCE_SYSCLK: /* LPUART1 Clock is System Clock */
+ lpuart_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_LPUART1_CLKSOURCE_HSI: /* LPUART1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ lpuart_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPUART1_CLKSOURCE_LSE: /* LPUART1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ lpuart_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPUART1_CLKSOURCE_PCLK1: /* LPUART1 Clock is PCLK1 */
+ default:
+ lpuart_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+
+ return lpuart_frequency;
+}
+
+/**
+ * @brief Return LPTIMx clock frequency
+ * @param LPTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE
+ * @retval LPTIM clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI or LSE) is not ready
+ */
+uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource)
+{
+ uint32_t lptim_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_LPTIM_CLKSOURCE(LPTIMxSource));
+
+ if (LPTIMxSource == LL_RCC_LPTIM1_CLKSOURCE)
+ {
+ /* LPTIM1CLK clock frequency */
+ switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource))
+ {
+ case LL_RCC_LPTIM1_CLKSOURCE_LSI: /* LPTIM1 Clock is LSI Osc. */
+ if (LL_RCC_LSI_IsReady())
+ {
+ lptim_frequency = LSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_HSI: /* LPTIM1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ lptim_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_LSE: /* LPTIM1 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ lptim_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM1_CLKSOURCE_PCLK1: /* LPTIM1 Clock is PCLK1 */
+ default:
+ lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ else
+ {
+ if (LPTIMxSource == LL_RCC_LPTIM2_CLKSOURCE)
+ {
+ /* LPTIM2CLK clock frequency */
+ switch (LL_RCC_GetLPTIMClockSource(LPTIMxSource))
+ {
+ case LL_RCC_LPTIM2_CLKSOURCE_LSI: /* LPTIM2 Clock is LSI Osc. */
+ if (LL_RCC_LSI_IsReady())
+ {
+ lptim_frequency = LSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM2_CLKSOURCE_HSI: /* LPTIM2 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ lptim_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM2_CLKSOURCE_LSE: /* LPTIM2 Clock is LSE Osc. */
+ if (LL_RCC_LSE_IsReady())
+ {
+ lptim_frequency = LSE_VALUE;
+ }
+ break;
+
+ case LL_RCC_LPTIM2_CLKSOURCE_PCLK1: /* LPTIM2 Clock is PCLK1 */
+ default:
+ lptim_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+ }
+ }
+
+ return lptim_frequency;
+}
+
+/**
+ * @brief Return SAIx clock frequency
+ * @param SAIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval SAI clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that external clock is used
+ */
+uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource)
+{
+ uint32_t sai_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SAI_CLKSOURCE(SAIxSource));
+
+ if (SAIxSource == LL_RCC_SAI1_CLKSOURCE)
+ {
+ /* SAI1CLK clock frequency */
+ switch (LL_RCC_GetSAIClockSource(SAIxSource))
+ {
+ case LL_RCC_SAI1_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SAI1 clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI1_GetFreqDomain_SAI();
+ }
+ break;
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+ case LL_RCC_SAI1_CLKSOURCE_PLLSAI2: /* PLLSAI2 clock used as SAI1 clock source */
+ if (LL_RCC_PLLSAI2_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI2_GetFreqDomain_SAI();
+ }
+ break;
+
+#endif /* RCC_PLLSAI2_SUPPORT */
+ case LL_RCC_SAI1_CLKSOURCE_PLL: /* PLL clock used as SAI1 clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ sai_frequency = RCC_PLL_GetFreqDomain_SAI();
+ }
+ break;
+
+ case LL_RCC_SAI1_CLKSOURCE_PIN: /* External input clock used as SAI1 clock source */
+ default:
+ sai_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+ }
+ else
+ {
+#if defined(RCC_CCIPR_SAI2SEL)
+ if (SAIxSource == LL_RCC_SAI2_CLKSOURCE)
+ {
+ /* SAI2CLK clock frequency */
+ switch (LL_RCC_GetSAIClockSource(SAIxSource))
+ {
+ case LL_RCC_SAI2_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SAI2 clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI1_GetFreqDomain_SAI();
+ }
+ break;
+
+ #if defined(RCC_PLLSAI2_SUPPORT)
+ case LL_RCC_SAI2_CLKSOURCE_PLLSAI2: /* PLLSAI2 clock used as SAI2 clock source */
+ if (LL_RCC_PLLSAI2_IsReady())
+ {
+ sai_frequency = RCC_PLLSAI2_GetFreqDomain_SAI();
+ }
+ break;
+
+ #endif /* RCC_PLLSAI2_SUPPORT */
+ case LL_RCC_SAI2_CLKSOURCE_PLL: /* PLL clock used as SAI2 clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ sai_frequency = RCC_PLL_GetFreqDomain_SAI();
+ }
+ break;
+
+ case LL_RCC_SAI2_CLKSOURCE_PIN: /* External input clock used as SAI2 clock source */
+ default:
+ sai_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+ }
+#endif /*RCC_CCIPR_SAI2SEL*/
+ }
+
+ return sai_frequency;
+}
+
+/**
+ * @brief Return SDMMCx clock frequency
+ * @param SDMMCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE
+ * @retval SDMMC clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (MSI) or PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
+ */
+uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource)
+{
+ uint32_t sdmmc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SDMMC_CLKSOURCE(SDMMCxSource));
+
+ /* SDMMC1CLK clock frequency */
+ switch (LL_RCC_GetSDMMCClockSource(SDMMCxSource))
+ {
+ case LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as SDMMC1 clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ sdmmc_frequency = RCC_PLLSAI1_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_SDMMC1_CLKSOURCE_PLL: /* PLL clock used as SDMMC1 clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ sdmmc_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_SDMMC1_CLKSOURCE_MSI: /* MSI clock used as SDMMC1 clock source */
+ if (LL_RCC_MSI_IsReady())
+ {
+ sdmmc_frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ }
+ break;
+
+ case LL_RCC_SDMMC1_CLKSOURCE_NONE: /* No clock used as SDMMC1 clock source */
+ default:
+ sdmmc_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return sdmmc_frequency;
+}
+
+/**
+ * @brief Return RNGx clock frequency
+ * @param RNGxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE
+ * @retval RNG clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (MSI) or PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
+ */
+uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource)
+{
+ uint32_t rng_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_RNG_CLKSOURCE(RNGxSource));
+
+ /* RNGCLK clock frequency */
+ switch (LL_RCC_GetRNGClockSource(RNGxSource))
+ {
+ case LL_RCC_RNG_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as RNG clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ rng_frequency = RCC_PLLSAI1_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_RNG_CLKSOURCE_PLL: /* PLL clock used as RNG clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ rng_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_RNG_CLKSOURCE_MSI: /* MSI clock used as RNG clock source */
+ if (LL_RCC_MSI_IsReady())
+ {
+ rng_frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ }
+ break;
+
+ case LL_RCC_RNG_CLKSOURCE_NONE: /* No clock used as RNG clock source */
+ default:
+ rng_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return rng_frequency;
+}
+
+#if defined(USB_OTG_FS) || defined(USB)
+/**
+ * @brief Return USBx clock frequency
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval USB clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (MSI) or PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
+ */
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource)
+{
+ uint32_t usb_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_USB_CLKSOURCE(USBxSource));
+
+ /* USBCLK clock frequency */
+ switch (LL_RCC_GetUSBClockSource(USBxSource))
+ {
+ case LL_RCC_USB_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as USB clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ usb_frequency = RCC_PLLSAI1_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_USB_CLKSOURCE_PLL: /* PLL clock used as USB clock source */
+ if (LL_RCC_PLL_IsReady())
+ {
+ usb_frequency = RCC_PLL_GetFreqDomain_48M();
+ }
+ break;
+
+ case LL_RCC_USB_CLKSOURCE_MSI: /* MSI clock used as USB clock source */
+ if (LL_RCC_MSI_IsReady())
+ {
+ usb_frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ }
+ break;
+
+ case LL_RCC_USB_CLKSOURCE_NONE: /* No clock used as USB clock source */
+ default:
+ usb_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return usb_frequency;
+}
+#endif /* USB_OTG_FS || USB */
+
+/**
+ * @brief Return ADCx clock frequency
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE
+ * @retval ADC clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (MSI) or PLL is not ready
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NA indicates that no clock source selected
+ */
+uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource)
+{
+ uint32_t adc_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_ADC_CLKSOURCE(ADCxSource));
+
+ /* ADCCLK clock frequency */
+ switch (LL_RCC_GetADCClockSource(ADCxSource))
+ {
+ case LL_RCC_ADC_CLKSOURCE_PLLSAI1: /* PLLSAI1 clock used as ADC clock source */
+ if (LL_RCC_PLLSAI1_IsReady())
+ {
+ adc_frequency = RCC_PLLSAI1_GetFreqDomain_ADC();
+ }
+ break;
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+ case LL_RCC_ADC_CLKSOURCE_PLLSAI2: /* PLLSAI2 clock used as ADC clock source */
+ if (LL_RCC_PLLSAI2_IsReady())
+ {
+ adc_frequency = RCC_PLLSAI2_GetFreqDomain_ADC();
+ }
+ break;
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+ case LL_RCC_ADC_CLKSOURCE_SYSCLK: /* SYSCLK clock used as ADC clock source */
+ adc_frequency = RCC_GetSystemClockFreq();
+ break;
+ case LL_RCC_ADC_CLKSOURCE_NONE: /* No clock used as ADC clock source */
+ default:
+ adc_frequency = LL_RCC_PERIPH_FREQUENCY_NA;
+ break;
+ }
+
+ return adc_frequency;
+}
+
+/**
+ * @brief Return SWPMIx clock frequency
+ * @param SWPMIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE
+ * @retval SWPMI clock frequency (in Hz)
+ * - @ref LL_RCC_PERIPH_FREQUENCY_NO indicates that oscillator (HSI) is not ready
+ */
+uint32_t LL_RCC_GetSWPMIClockFreq(uint32_t SWPMIxSource)
+{
+ uint32_t swpmi_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_SWPMI_CLKSOURCE(SWPMIxSource));
+
+ /* SWPMI1CLK clock frequency */
+ switch (LL_RCC_GetSWPMIClockSource(SWPMIxSource))
+ {
+ case LL_RCC_SWPMI1_CLKSOURCE_HSI: /* SWPMI1 Clock is HSI Osc. */
+ if (LL_RCC_HSI_IsReady())
+ {
+ swpmi_frequency = HSI_VALUE;
+ }
+ break;
+
+ case LL_RCC_SWPMI1_CLKSOURCE_PCLK: /* SWPMI1 Clock is PCLK1 */
+ default:
+ swpmi_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+
+ return swpmi_frequency;
+}
+
+#if defined(DFSDM1_Channel0)
+/**
+ * @brief Return DFSDMx clock frequency
+ * @param DFSDMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE
+ * @retval DFSDM clock frequency (in Hz)
+ */
+uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource)
+{
+ uint32_t dfsdm_frequency = LL_RCC_PERIPH_FREQUENCY_NO;
+
+ /* Check parameter */
+ assert_param(IS_LL_RCC_DFSDM_CLKSOURCE(DFSDMxSource));
+
+ /* DFSDM1CLK clock frequency */
+ switch (LL_RCC_GetDFSDMClockSource(DFSDMxSource))
+ {
+ case LL_RCC_DFSDM1_CLKSOURCE_SYSCLK: /* DFSDM1 Clock is SYSCLK */
+ dfsdm_frequency = RCC_GetSystemClockFreq();
+ break;
+
+ case LL_RCC_DFSDM1_CLKSOURCE_PCLK: /* DFSDM1 Clock is PCLK1 */
+ default:
+ dfsdm_frequency = RCC_GetPCLK1ClockFreq(RCC_GetHCLKClockFreq(RCC_GetSystemClockFreq()));
+ break;
+ }
+
+ return dfsdm_frequency;
+}
+#endif /* DFSDM1_Channel0 */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_LL_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Return SYSTEM clock frequency
+ * @retval SYSTEM clock frequency (in Hz)
+ */
+uint32_t RCC_GetSystemClockFreq(void)
+{
+ uint32_t frequency = 0;
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (LL_RCC_GetSysClkSource())
+ {
+ case LL_RCC_SYS_CLKSOURCE_STATUS_MSI: /* MSI used as system clock source */
+ frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSI: /* HSI used as system clock source */
+ frequency = HSI_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_HSE: /* HSE used as system clock source */
+ frequency = HSE_VALUE;
+ break;
+
+ case LL_RCC_SYS_CLKSOURCE_STATUS_PLL: /* PLL used as system clock source */
+ frequency = RCC_PLL_GetFreqDomain_SYS();
+ break;
+
+ default:
+ frequency = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+
+ return frequency;
+}
+
+/**
+ * @brief Return HCLK clock frequency
+ * @param SYSCLK_Frequency SYSCLK clock frequency
+ * @retval HCLK clock frequency (in Hz)
+ */
+uint32_t RCC_GetHCLKClockFreq(uint32_t SYSCLK_Frequency)
+{
+ /* HCLK clock frequency */
+ return __LL_RCC_CALC_HCLK_FREQ(SYSCLK_Frequency, LL_RCC_GetAHBPrescaler());
+}
+
+/**
+ * @brief Return PCLK1 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK1ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK1 clock frequency */
+ return __LL_RCC_CALC_PCLK1_FREQ(HCLK_Frequency, LL_RCC_GetAPB1Prescaler());
+}
+
+/**
+ * @brief Return PCLK2 clock frequency
+ * @param HCLK_Frequency HCLK clock frequency
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+uint32_t RCC_GetPCLK2ClockFreq(uint32_t HCLK_Frequency)
+{
+ /* PCLK2 clock frequency */
+ return __LL_RCC_CALC_PCLK2_FREQ(HCLK_Frequency, LL_RCC_GetAPB2Prescaler());
+}
+
+/**
+ * @brief Return PLL clock frequency used for system domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_SYS(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetR());
+}
+/**
+ * @brief Return PLL clock frequency used for SAI domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_SAI(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE / PLLM) * PLLN
+ SAI Domain clock = PLL_VCO / PLLP
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetP());
+}
+
+/**
+ * @brief Return PLL clock frequency used for 48 MHz domain
+ * @retval PLL clock frequency (in Hz)
+ */
+uint32_t RCC_PLL_GetFreqDomain_48M(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
+ 48M Domain clock = PLL_VCO / PLLQ
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLL clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLL clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLL clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLCLK_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLL_GetN(), LL_RCC_PLL_GetQ());
+}
+
+/**
+ * @brief Return PLLSAI1 clock frequency used for SAI domain
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI1_GetFreqDomain_SAI(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLLSAI1_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI1N
+ SAI Domain clock = PLLSAI1_VCO / PLLSAI1P
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI1 clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI1 clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI1_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI1_GetN(), LL_RCC_PLLSAI1_GetP());
+}
+
+/**
+ * @brief Return PLLSAI1 clock frequency used for 48Mhz domain
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI1_GetFreqDomain_48M(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLLSAI1_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI1N
+ 48M Domain clock = PLLSAI1_VCO / PLLSAI1Q
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI1 clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI1 clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI1_48M_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI1_GetN(), LL_RCC_PLLSAI1_GetQ());
+}
+
+/**
+ * @brief Return PLLSAI1 clock frequency used for ADC domain
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI1_GetFreqDomain_ADC(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLLSAI1_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI1N
+ 48M Domain clock = PLLSAI1_VCO / PLLSAI1R
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI1 clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI1 clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI1 clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI1_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI1_GetN(), LL_RCC_PLLSAI1_GetR());
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Return PLLSAI2 clock frequency used for SAI domain
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI2_GetFreqDomain_SAI(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLLSAI2_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI2N
+ SAI Domain clock = PLLSAI2_VCO / PLLSAI2P
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI2 clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI2 clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI2 clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI2_SAI_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI2_GetN(), LL_RCC_PLLSAI2_GetP());
+}
+
+/**
+ * @brief Return PLLSAI2 clock frequency used for ADC domain
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+uint32_t RCC_PLLSAI2_GetFreqDomain_ADC(void)
+{
+ uint32_t pllinputfreq = 0, pllsource = 0;
+
+ /* PLLSAI2_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLSAI2N
+ 48M Domain clock = PLLSAI2_VCO / PLLSAI2R
+ */
+ pllsource = LL_RCC_PLL_GetMainSource();
+
+ switch (pllsource)
+ {
+ case LL_RCC_PLLSOURCE_MSI: /* MSI used as PLLSAI2 clock source */
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+
+ case LL_RCC_PLLSOURCE_HSI: /* HSI used as PLLSAI2 clock source */
+ pllinputfreq = HSI_VALUE;
+ break;
+
+ case LL_RCC_PLLSOURCE_HSE: /* HSE used as PLLSAI2 clock source */
+ pllinputfreq = HSE_VALUE;
+ break;
+
+ default:
+ pllinputfreq = __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ (LL_RCC_MSI_IsEnabledRangeSelect() ?
+ LL_RCC_MSI_GetRange() :
+ LL_RCC_MSI_GetRangeAfterStandby()));
+ break;
+ }
+ return __LL_RCC_CALC_PLLSAI2_ADC_FREQ(pllinputfreq, LL_RCC_PLL_GetDivider(),
+ LL_RCC_PLLSAI2_GetN(), LL_RCC_PLLSAI2_GetR());
+}
+
+#endif /*RCC_PLLSAI2_SUPPORT*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/