TUKS MCU Introductory course
/
TUKS-COURSE-TIMER
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: HAL_L476/stm32l4xx_ll_pwr.h
- Revision:
- 1:d0dfbce63a89
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HAL_L476/stm32l4xx_ll_pwr.h Fri Feb 24 21:13:56 2017 +0000
@@ -0,0 +1,1408 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_pwr.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of PWR LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_PWR_H
+#define __STM32L4xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+ * @{
+ */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_WriteReg function
+ * @{
+ */
+#define LL_PWR_SCR_CSBF PWR_SCR_CSBF
+#define LL_PWR_SCR_CWUF PWR_SCR_CWUF
+#define LL_PWR_SCR_CWUF5 PWR_SCR_CWUF5
+#define LL_PWR_SCR_CWUF4 PWR_SCR_CWUF4
+#define LL_PWR_SCR_CWUF3 PWR_SCR_CWUF3
+#define LL_PWR_SCR_CWUF2 PWR_SCR_CWUF2
+#define LL_PWR_SCR_CWUF1 PWR_SCR_CWUF1
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_PWR_ReadReg function
+ * @{
+ */
+#define LL_PWR_SR1_WUFI PWR_SR1_WUFI
+#define LL_PWR_SR1_SBF PWR_SR1_SBF
+#define LL_PWR_SR1_WUF5 PWR_SR1_WUF5
+#define LL_PWR_SR1_WUF4 PWR_SR1_WUF4
+#define LL_PWR_SR1_WUF3 PWR_SR1_WUF3
+#define LL_PWR_SR1_WUF2 PWR_SR1_WUF2
+#define LL_PWR_SR1_WUF1 PWR_SR1_WUF1
+#define LL_PWR_SR2_PVMO4 PWR_SR2_PVMO4
+#define LL_PWR_SR2_PVMO3 PWR_SR2_PVMO3
+#if defined(PWR_SR2_PVMO2)
+#define LL_PWR_SR2_PVMO2 PWR_SR2_PVMO2
+#endif /* PWR_SR2_PVMO2 */
+#define LL_PWR_SR2_PVMO1 PWR_SR2_PVMO1
+#define LL_PWR_SR2_PVDO PWR_SR2_PVDO
+#define LL_PWR_SR2_VOSF PWR_SR2_VOSF
+#define LL_PWR_SR2_REGLPF PWR_SR2_REGLPF
+#define LL_PWR_SR2_REGLPS PWR_SR2_REGLPS
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_REGU_VOLTAGE REGU VOLTAGE
+ * @{
+ */
+#define LL_PWR_REGU_VOLTAGE_SCALE1 (PWR_CR1_VOS_0)
+#define LL_PWR_REGU_VOLTAGE_SCALE2 (PWR_CR1_VOS_1)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_MODE_PWR MODE PWR
+ * @{
+ */
+#define LL_PWR_MODE_STOP0 (PWR_CR1_LPMS_STOP0)
+#define LL_PWR_MODE_STOP1 (PWR_CR1_LPMS_STOP1)
+#define LL_PWR_MODE_STOP2 (PWR_CR1_LPMS_STOP2)
+#define LL_PWR_MODE_STANDBY (PWR_CR1_LPMS_STANDBY)
+#define LL_PWR_MODE_SHUTDOWN (PWR_CR1_LPMS_SHUTDOWN)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_PVM_VDDUSB_1 PVM VDDUSB 1
+ * @{
+ */
+#if defined(USB_OTG_FS)
+#define LL_PWR_PVM_VDDUSB_1_2V (PWR_CR2_PVME1) /* Monitoring VDDUSB vs. 1.2V */
+#endif /* USB_OTG_FS */
+#if defined(PWR_CR2_PVME2)
+#define LL_PWR_PVM_VDDIO2_0_9V (PWR_CR2_PVME2) /* Monitoring VDDIO2 vs. 0.9V */
+#endif /* PWR_CR2_PVME2 */
+#define LL_PWR_PVM_VDDA_1_62V (PWR_CR2_PVME3) /* Monitoring VDDA vs. 1.62V */
+#define LL_PWR_PVM_VDDA_2_2V (PWR_CR2_PVME4) /* Monitoring VDDA vs. 2.2V */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_PVDLEVEL PVDLEVEL
+ * @{
+ */
+#define LL_PWR_PVDLEVEL_0 (PWR_CR2_PLS_LEV0) /* VPVD0 around 2.0 V */
+#define LL_PWR_PVDLEVEL_1 (PWR_CR2_PLS_LEV1) /* VPVD1 around 2.2 V */
+#define LL_PWR_PVDLEVEL_2 (PWR_CR2_PLS_LEV2) /* VPVD2 around 2.4 V */
+#define LL_PWR_PVDLEVEL_3 (PWR_CR2_PLS_LEV3) /* VPVD3 around 2.5 V */
+#define LL_PWR_PVDLEVEL_4 (PWR_CR2_PLS_LEV4) /* VPVD4 around 2.6 V */
+#define LL_PWR_PVDLEVEL_5 (PWR_CR2_PLS_LEV5) /* VPVD5 around 2.8 V */
+#define LL_PWR_PVDLEVEL_6 (PWR_CR2_PLS_LEV6) /* VPVD6 around 2.9 V */
+#define LL_PWR_PVDLEVEL_7 (PWR_CR2_PLS_LEV7) /* External input analog voltage (Compare internally to VREFINT) */
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_WAKEUP WAKEUP
+ * @{
+ */
+#define LL_PWR_WAKEUP_PIN1 (PWR_CR3_EWUP1)
+#define LL_PWR_WAKEUP_PIN2 (PWR_CR3_EWUP2)
+#define LL_PWR_WAKEUP_PIN3 (PWR_CR3_EWUP3)
+#define LL_PWR_WAKEUP_PIN4 (PWR_CR3_EWUP4)
+#define LL_PWR_WAKEUP_PIN5 (PWR_CR3_EWUP5)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_BATT_CHARG_RESISTOR BATT CHARG RESISTOR
+ * @{
+ */
+#define LL_PWR_BATT_CHARG_RESISTOR_5K ((uint32_t)0x00000000)
+#define LL_PWR_BATT_CHARGRESISTOR_1_5K (PWR_CR4_VBRS)
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GPIO GPIO
+ * @{
+ */
+#define LL_PWR_GPIO_A ((uint32_t)(&(PWR->PUCRA)))
+#define LL_PWR_GPIO_B ((uint32_t)(&(PWR->PUCRB)))
+#define LL_PWR_GPIO_C ((uint32_t)(&(PWR->PUCRC)))
+#define LL_PWR_GPIO_D ((uint32_t)(&(PWR->PUCRD)))
+#define LL_PWR_GPIO_E ((uint32_t)(&(PWR->PUCRE)))
+#if defined(GPIOF)
+#define LL_PWR_GPIO_F ((uint32_t)(&(PWR->PUCRF)))
+#endif /* GPIOF */
+#if defined(GPIOG)
+#define LL_PWR_GPIO_G ((uint32_t)(&(PWR->PUCRG)))
+#endif /* GPIOG */
+#define LL_PWR_GPIO_H ((uint32_t)(&(PWR->PUCRH)))
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EC_GPIO_BIT GPIO BIT
+ * @{
+ */
+#define LL_PWR_GPIO_BIT_0 ((uint32_t)0x00000001)
+#define LL_PWR_GPIO_BIT_1 ((uint32_t)0x00000002)
+#define LL_PWR_GPIO_BIT_2 ((uint32_t)0x00000004)
+#define LL_PWR_GPIO_BIT_3 ((uint32_t)0x00000008)
+#define LL_PWR_GPIO_BIT_4 ((uint32_t)0x00000010)
+#define LL_PWR_GPIO_BIT_5 ((uint32_t)0x00000020)
+#define LL_PWR_GPIO_BIT_6 ((uint32_t)0x00000040)
+#define LL_PWR_GPIO_BIT_7 ((uint32_t)0x00000080)
+#define LL_PWR_GPIO_BIT_8 ((uint32_t)0x00000100)
+#define LL_PWR_GPIO_BIT_9 ((uint32_t)0x00000200)
+#define LL_PWR_GPIO_BIT_10 ((uint32_t)0x00000400)
+#define LL_PWR_GPIO_BIT_11 ((uint32_t)0x00000800)
+#define LL_PWR_GPIO_BIT_12 ((uint32_t)0x00001000)
+#define LL_PWR_GPIO_BIT_13 ((uint32_t)0x00002000)
+#define LL_PWR_GPIO_BIT_14 ((uint32_t)0x00004000)
+#define LL_PWR_GPIO_BIT_15 ((uint32_t)0x00008000)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+ * @{
+ */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in PWR register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in PWR register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+ * @{
+ */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+ * @{
+ */
+
+/**
+ * @brief Switch the regulator from main mode to low-power mode
+ * @rmtoll CR1 LPR LL_PWR_EnableLowPowerRunMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableLowPowerRunMode(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_LPR);
+}
+
+/**
+ * @brief Switch the regulator from low-power mode to main mode
+ * @rmtoll CR1 LPR LL_PWR_DisableLowPowerRunMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableLowPowerRunMode(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_LPR);
+}
+
+/**
+ * @brief Check if the regulator is in low-power mode
+ * @rmtoll CR1 LPR LL_PWR_IsEnabledLowPowerRunMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledLowPowerRunMode(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_LPR) == (PWR_CR1_LPR));
+}
+
+/**
+ * @brief Switch from run main mode to run low-power mode.
+ * @rmtoll CR1 LPR LL_PWR_EnterLowPowerRunMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnterLowPowerRunMode(void)
+{
+ LL_PWR_EnableLowPowerRunMode();
+}
+
+/**
+ * @brief Switch from run main mode to low-power mode.
+ * @rmtoll CR1 LPR LL_PWR_ExitLowPowerRunMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ExitLowPowerRunMode(void)
+{
+ LL_PWR_DisableLowPowerRunMode();
+}
+
+/**
+ * @brief Set the main internal regulator output voltage
+ * @rmtoll CR1 VOS LL_PWR_SetRegulVoltageScaling
+ * @param VoltageScaling This parameter can be one of the following values:
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetRegulVoltageScaling(uint32_t VoltageScaling)
+{
+ MODIFY_REG(PWR->CR1, PWR_CR1_VOS, VoltageScaling);
+}
+
+/**
+ * @brief Get the main internal regulator output voltage
+ * @rmtoll CR1 VOS LL_PWR_GetRegulVoltageScaling
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE1
+ * @arg @ref LL_PWR_REGU_VOLTAGE_SCALE2
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulVoltageScaling(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_VOS));
+}
+
+/**
+ * @brief Enable access to the backup domain
+ * @rmtoll CR1 DBP LL_PWR_EnableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+ SET_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Disable access to the backup domain
+ * @rmtoll CR1 DBP LL_PWR_DisableBkUpAccess
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+ CLEAR_BIT(PWR->CR1, PWR_CR1_DBP);
+}
+
+/**
+ * @brief Check if the backup domain is enabled
+ * @rmtoll CR1 DBP LL_PWR_IsEnabledBkUpAccess
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+ return (READ_BIT(PWR->CR1, PWR_CR1_DBP) == (PWR_CR1_DBP));
+}
+
+/**
+ * @brief Set Low-Power mode
+ * @rmtoll CR1 LPMS LL_PWR_SetPowerMode
+ * @param LowPowerMode This parameter can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP0
+ * @arg @ref LL_PWR_MODE_STOP1
+ * @arg @ref LL_PWR_MODE_STOP2
+ * @arg @ref LL_PWR_MODE_STANDBY
+ * @arg @ref LL_PWR_MODE_SHUTDOWN
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t LowPowerMode)
+{
+ MODIFY_REG(PWR->CR1, PWR_CR1_LPMS, LowPowerMode);
+}
+
+/**
+ * @brief Get Low-Power mode
+ * @rmtoll CR1 LPMS LL_PWR_GetPowerMode
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_MODE_STOP0
+ * @arg @ref LL_PWR_MODE_STOP1
+ * @arg @ref LL_PWR_MODE_STOP2
+ * @arg @ref LL_PWR_MODE_STANDBY
+ * @arg @ref LL_PWR_MODE_SHUTDOWN
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR1, PWR_CR1_LPMS));
+}
+
+#if defined(USB_OTG_FS)
+/**
+ * @brief Enable VDDUSB supply
+ * @rmtoll CR2 USV LL_PWR_EnableVddUSB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableVddUSB(void)
+{
+ SET_BIT(PWR->CR2, PWR_CR2_USV);
+}
+#endif /* USB_OTG_FS */
+
+#if defined(USB_OTG_FS)
+/**
+ * @brief Disable VDDUSB supply
+ * @rmtoll CR2 USV LL_PWR_DisableVddUSB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableVddUSB(void)
+{
+ CLEAR_BIT(PWR->CR2, PWR_CR2_USV);
+}
+#endif /* USB_OTG_FS */
+
+#if defined(USB_OTG_FS)
+/**
+ * @brief Check if VDDUSB supply is enabled
+ * @rmtoll CR2 USV LL_PWR_IsEnabledVddUSB
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddUSB(void)
+{
+ return (READ_BIT(PWR->CR2, PWR_CR2_USV) == (PWR_CR2_USV));
+}
+#endif /* USB_OTG_FS */
+
+#if defined(PWR_CR2_IOSV)
+/**
+ * @brief Enable VDDIO2 supply
+ * @rmtoll CR2 IOSV LL_PWR_EnableVddIO2
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableVddIO2(void)
+{
+ SET_BIT(PWR->CR2, PWR_CR2_IOSV);
+}
+
+/**
+ * @brief Disable VDDIO2 supply
+ * @rmtoll CR2 IOSV LL_PWR_DisableVddIO2
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableVddIO2(void)
+{
+ CLEAR_BIT(PWR->CR2, PWR_CR2_IOSV);
+}
+
+/**
+ * @brief Check if VDDIO2 supply is enabled
+ * @rmtoll CR2 IOSV LL_PWR_IsEnabledVddIO2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledVddIO2(void)
+{
+ return (READ_BIT(PWR->CR2, PWR_CR2_IOSV) == (PWR_CR2_IOSV));
+}
+#endif /* PWR_CR2_IOSV */
+
+/**
+ * @brief Enable the Power Voltage Monitoring on a peripheral
+ * @rmtoll CR2 PVME1 LL_PWR_EnablePVM\n
+ * CR2 PVME2 LL_PWR_EnablePVM\n
+ * CR2 PVME3 LL_PWR_EnablePVM\n
+ * CR2 PVME4 LL_PWR_EnablePVM
+ * @param PeriphVoltage This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
+ * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
+ * @arg @ref LL_PWR_PVM_VDDA_1_62V
+ * @arg @ref LL_PWR_PVM_VDDA_2_2V
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePVM(uint32_t PeriphVoltage)
+{
+ SET_BIT(PWR->CR2, PeriphVoltage);
+}
+
+/**
+ * @brief Disable the Power Voltage Monitoring on a peripheral
+ * @rmtoll CR2 PVME1 LL_PWR_DisablePVM\n
+ * CR2 PVME2 LL_PWR_DisablePVM\n
+ * CR2 PVME3 LL_PWR_DisablePVM\n
+ * CR2 PVME4 LL_PWR_DisablePVM
+ * @param PeriphVoltage This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
+ * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
+ * @arg @ref LL_PWR_PVM_VDDA_1_62V
+ * @arg @ref LL_PWR_PVM_VDDA_2_2V
+ *
+ * (*) value not defined in all devices
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePVM(uint32_t PeriphVoltage)
+{
+ CLEAR_BIT(PWR->CR2, PeriphVoltage);
+}
+
+/**
+ * @brief Check if Power Voltage Monitoring is enabled on a peripheral
+ * @rmtoll CR2 PVME1 LL_PWR_IsEnabledPVM\n
+ * CR2 PVME2 LL_PWR_IsEnabledPVM\n
+ * CR2 PVME3 LL_PWR_IsEnabledPVM\n
+ * CR2 PVME4 LL_PWR_IsEnabledPVM
+ * @param PeriphVoltage This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVM_VDDUSB_1_2V (*)
+ * @arg @ref LL_PWR_PVM_VDDIO2_0_9V (*)
+ * @arg @ref LL_PWR_PVM_VDDA_1_62V
+ * @arg @ref LL_PWR_PVM_VDDA_2_2V
+ *
+ * (*) value not defined in all devices
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVM(uint32_t PeriphVoltage)
+{
+ return (READ_BIT(PWR->CR2, PeriphVoltage) == (PeriphVoltage));
+}
+
+/**
+ * @brief Configure the voltage threshold detected by the Power Voltage Detector
+ * @rmtoll CR2 PLS LL_PWR_SetPVDLevel
+ * @param PVDLevel This parameter can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+ MODIFY_REG(PWR->CR2, PWR_CR2_PLS, PVDLevel);
+}
+
+/**
+ * @brief Get the voltage threshold detection
+ * @rmtoll CR2 PLS LL_PWR_GetPVDLevel
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_PVDLEVEL_0
+ * @arg @ref LL_PWR_PVDLEVEL_1
+ * @arg @ref LL_PWR_PVDLEVEL_2
+ * @arg @ref LL_PWR_PVDLEVEL_3
+ * @arg @ref LL_PWR_PVDLEVEL_4
+ * @arg @ref LL_PWR_PVDLEVEL_5
+ * @arg @ref LL_PWR_PVDLEVEL_6
+ * @arg @ref LL_PWR_PVDLEVEL_7
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR2, PWR_CR2_PLS));
+}
+
+/**
+ * @brief Enable Power Voltage Detector
+ * @rmtoll CR2 PVDE LL_PWR_EnablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+ SET_BIT(PWR->CR2, PWR_CR2_PVDE);
+}
+
+/**
+ * @brief Disable Power Voltage Detector
+ * @rmtoll CR2 PVDE LL_PWR_DisablePVD
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+ CLEAR_BIT(PWR->CR2, PWR_CR2_PVDE);
+}
+
+/**
+ * @brief Check if Power Voltage Detector is enabled
+ * @rmtoll CR2 PVDE LL_PWR_IsEnabledPVD
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+ return (READ_BIT(PWR->CR2, PWR_CR2_PVDE) == (PWR_CR2_PVDE));
+}
+
+/**
+ * @brief Enable Internal Wake-up line
+ * @rmtoll CR3 EIWF LL_PWR_EnableInternWU
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableInternWU(void)
+{
+ SET_BIT(PWR->CR3, PWR_CR3_EIWF);
+}
+
+/**
+ * @brief Disable Internal Wake-up line
+ * @rmtoll CR3 EIWF LL_PWR_DisableInternWU
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableInternWU(void)
+{
+ CLEAR_BIT(PWR->CR3, PWR_CR3_EIWF);
+}
+
+/**
+ * @brief Check if Internal Wake-up line is enabled
+ * @rmtoll CR3 EIWF LL_PWR_IsEnabledInternWU
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledInternWU(void)
+{
+ return (READ_BIT(PWR->CR3, PWR_CR3_EIWF) == (PWR_CR3_EIWF));
+}
+
+/**
+ * @brief Enable pull-up and pull-down configuration
+ * @rmtoll CR3 APC LL_PWR_EnablePUPDCfg
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnablePUPDCfg(void)
+{
+ SET_BIT(PWR->CR3, PWR_CR3_APC);
+}
+
+/**
+ * @brief Disable pull-up and pull-down configuration
+ * @rmtoll CR3 APC LL_PWR_DisablePUPDCfg
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisablePUPDCfg(void)
+{
+ CLEAR_BIT(PWR->CR3, PWR_CR3_APC);
+}
+
+/**
+ * @brief Check if pull-up and pull-down configuration is enabled
+ * @rmtoll CR3 APC LL_PWR_IsEnabledPUPDCfg
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPUPDCfg(void)
+{
+ return (READ_BIT(PWR->CR3, PWR_CR3_APC) == (PWR_CR3_APC));
+}
+
+/**
+ * @brief Enable SRAM2 content retention in Standby mode
+ * @rmtoll CR3 RRS LL_PWR_EnableSRAM2Retention
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableSRAM2Retention(void)
+{
+ SET_BIT(PWR->CR3, PWR_CR3_RRS);
+}
+
+/**
+ * @brief Disable SRAM2 content retention in Standby mode
+ * @rmtoll CR3 RRS LL_PWR_DisableSRAM2Retention
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableSRAM2Retention(void)
+{
+ CLEAR_BIT(PWR->CR3, PWR_CR3_RRS);
+}
+
+/**
+ * @brief Check if SRAM2 content retention in Standby mode is enabled
+ * @rmtoll CR3 RRS LL_PWR_IsEnabledSRAM2Retention
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledSRAM2Retention(void)
+{
+ return (READ_BIT(PWR->CR3, PWR_CR3_RRS) == (PWR_CR3_RRS));
+}
+
+/**
+ * @brief Enable the WakeUp PINx functionality
+ * @rmtoll CR3 EWUP1 LL_PWR_EnableWakeUpPin\n
+ * CR3 EWUP2 LL_PWR_EnableWakeUpPin\n
+ * CR3 EWUP3 LL_PWR_EnableWakeUpPin\n
+ * CR3 EWUP4 LL_PWR_EnableWakeUpPin\n
+ * CR3 EWUP5 LL_PWR_EnableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CR3, WakeUpPin);
+}
+
+/**
+ * @brief Disable the WakeUp PINx functionality
+ * @rmtoll CR3 EWUP1 LL_PWR_DisableWakeUpPin\n
+ * CR3 EWUP2 LL_PWR_DisableWakeUpPin\n
+ * CR3 EWUP3 LL_PWR_DisableWakeUpPin\n
+ * CR3 EWUP4 LL_PWR_DisableWakeUpPin\n
+ * CR3 EWUP5 LL_PWR_DisableWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CR3, WakeUpPin);
+}
+
+/**
+ * @brief Check if the WakeUp PINx functionality is enabled
+ * @rmtoll CR3 EWUP1 LL_PWR_IsEnabledWakeUpPin\n
+ * CR3 EWUP2 LL_PWR_IsEnabledWakeUpPin\n
+ * CR3 EWUP3 LL_PWR_IsEnabledWakeUpPin\n
+ * CR3 EWUP4 LL_PWR_IsEnabledWakeUpPin\n
+ * CR3 EWUP5 LL_PWR_IsEnabledWakeUpPin
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CR3, WakeUpPin) == (WakeUpPin));
+}
+
+/**
+ * @brief Set the resistor impedance
+ * @rmtoll CR4 VBRS LL_PWR_SetBattChargResistor
+ * @param Resistor This parameter can be one of the following values:
+ * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K
+ * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetBattChargResistor(uint32_t Resistor)
+{
+ MODIFY_REG(PWR->CR4, PWR_CR4_VBRS, Resistor);
+}
+
+/**
+ * @brief Get the resistor impedance
+ * @rmtoll CR4 VBRS LL_PWR_GetBattChargResistor
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_PWR_BATT_CHARG_RESISTOR_5K
+ * @arg @ref LL_PWR_BATT_CHARGRESISTOR_1_5K
+ */
+__STATIC_INLINE uint32_t LL_PWR_GetBattChargResistor(void)
+{
+ return (uint32_t)(READ_BIT(PWR->CR4, PWR_CR4_VBRS));
+}
+
+/**
+ * @brief Enable battery charging
+ * @rmtoll CR4 VBE LL_PWR_EnableBatteryCharging
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableBatteryCharging(void)
+{
+ SET_BIT(PWR->CR4, PWR_CR4_VBE);
+}
+
+/**
+ * @brief Disable battery charging
+ * @rmtoll CR4 VBE LL_PWR_DisableBatteryCharging
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableBatteryCharging(void)
+{
+ CLEAR_BIT(PWR->CR4, PWR_CR4_VBE);
+}
+
+/**
+ * @brief Check if battery charging is enabled
+ * @rmtoll CR4 VBE LL_PWR_IsEnabledBatteryCharging
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBatteryCharging(void)
+{
+ return (READ_BIT(PWR->CR4, PWR_CR4_VBE) == (PWR_CR4_VBE));
+}
+
+/**
+ * @brief Set the Wake-Up pin polarity low for the event detection
+ * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR4 WP2 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR4 WP3 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR4 WP4 LL_PWR_SetWakeUpPinPolarityLow\n
+ * CR4 WP5 LL_PWR_SetWakeUpPinPolarityLow
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityLow(uint32_t WakeUpPin)
+{
+ SET_BIT(PWR->CR4, WakeUpPin);
+}
+
+/**
+ * @brief Set the Wake-Up pin polarity high for the event detection
+ * @rmtoll CR4 WP1 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR4 WP2 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR4 WP3 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR4 WP4 LL_PWR_SetWakeUpPinPolarityHigh\n
+ * CR4 WP5 LL_PWR_SetWakeUpPinPolarityHigh
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_SetWakeUpPinPolarityHigh(uint32_t WakeUpPin)
+{
+ CLEAR_BIT(PWR->CR4, WakeUpPin);
+}
+
+/**
+ * @brief Get the Wake-Up pin polarity for the event detection
+ * @rmtoll CR4 WP1 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR4 WP2 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR4 WP3 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR4 WP4 LL_PWR_IsWakeUpPinPolarityLow\n
+ * CR4 WP5 LL_PWR_IsWakeUpPinPolarityLow
+ * @param WakeUpPin This parameter can be one of the following values:
+ * @arg @ref LL_PWR_WAKEUP_PIN1
+ * @arg @ref LL_PWR_WAKEUP_PIN2
+ * @arg @ref LL_PWR_WAKEUP_PIN3
+ * @arg @ref LL_PWR_WAKEUP_PIN4
+ * @arg @ref LL_PWR_WAKEUP_PIN5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsWakeUpPinPolarityLow(uint32_t WakeUpPin)
+{
+ return (READ_BIT(PWR->CR4, WakeUpPin) == (WakeUpPin));
+}
+
+/**
+ * @brief Enable GPIO pull-up state in Standby and Shutdown modes
+ * @rmtoll PUCRA PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRB PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRC PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRD PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRE PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRF PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRG PU0-15 LL_PWR_EnableGPIOPullUp\n
+ * PUCRH PU0-1 LL_PWR_EnableGPIOPullUp
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
+{
+ SET_BIT(*((uint32_t *)GPIO), GPIONumber);
+}
+
+/**
+ * @brief Disable GPIO pull-up state in Standby and Shutdown modes
+ * @rmtoll PUCRA PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRB PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRC PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRD PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRE PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRF PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRG PU0-15 LL_PWR_DisableGPIOPullUp\n
+ * PUCRH PU0-1 LL_PWR_DisableGPIOPullUp
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
+{
+ CLEAR_BIT(*((uint32_t *)GPIO), GPIONumber);
+}
+
+/**
+ * @brief Check if GPIO pull-up state is enabled
+ * @rmtoll PUCRA PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRB PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRC PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRD PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRE PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRF PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRG PU0-15 LL_PWR_IsEnabledGPIOPullUp\n
+ * PUCRH PU0-1 LL_PWR_IsEnabledGPIOPullUp
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullUp(uint32_t GPIO, uint32_t GPIONumber)
+{
+ return (READ_BIT(*((uint32_t *)(GPIO)), GPIONumber) == (GPIONumber));
+}
+
+/**
+ * @brief Enable GPIO pull-down state in Standby and Shutdown modes
+ * @rmtoll PDCRA PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRB PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRC PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRD PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRE PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRF PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRG PD0-15 LL_PWR_EnableGPIOPullDown\n
+ * PDCRH PD0-1 LL_PWR_EnableGPIOPullDown
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_EnableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
+{
+ register uint32_t temp = (uint32_t)(GPIO) + 4;
+ SET_BIT(*((uint32_t *)(temp)), GPIONumber);
+}
+
+/**
+ * @brief Disable GPIO pull-down state in Standby and Shutdown modes
+ * @rmtoll PDCRA PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRB PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRC PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRD PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRE PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRF PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRG PD0-15 LL_PWR_DisableGPIOPullDown\n
+ * PDCRH PD0-1 LL_PWR_DisableGPIOPullDown
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_DisableGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
+{
+ register uint32_t temp = (uint32_t)(GPIO) + 4;
+ CLEAR_BIT(*((uint32_t *)(temp)), GPIONumber);
+}
+
+/**
+ * @brief Check if GPIO pull-down state is enabled
+ * @rmtoll PDCRA PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRB PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRC PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRD PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRE PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRF PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRG PD0-15 LL_PWR_IsEnabledGPIOPullDown\n
+ * PDCRH PD0-1 LL_PWR_IsEnabledGPIOPullDown
+ * @param GPIO This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_A
+ * @arg @ref LL_PWR_GPIO_B
+ * @arg @ref LL_PWR_GPIO_C
+ * @arg @ref LL_PWR_GPIO_D
+ * @arg @ref LL_PWR_GPIO_E
+ * @arg @ref LL_PWR_GPIO_F (*)
+ * @arg @ref LL_PWR_GPIO_G (*)
+ * @arg @ref LL_PWR_GPIO_H
+ *
+ * (*) value not defined in all devices
+ * @param GPIONumber This parameter can be one of the following values:
+ * @arg @ref LL_PWR_GPIO_BIT_0
+ * @arg @ref LL_PWR_GPIO_BIT_1
+ * @arg @ref LL_PWR_GPIO_BIT_2
+ * @arg @ref LL_PWR_GPIO_BIT_3
+ * @arg @ref LL_PWR_GPIO_BIT_4
+ * @arg @ref LL_PWR_GPIO_BIT_5
+ * @arg @ref LL_PWR_GPIO_BIT_6
+ * @arg @ref LL_PWR_GPIO_BIT_7
+ * @arg @ref LL_PWR_GPIO_BIT_8
+ * @arg @ref LL_PWR_GPIO_BIT_9
+ * @arg @ref LL_PWR_GPIO_BIT_10
+ * @arg @ref LL_PWR_GPIO_BIT_11
+ * @arg @ref LL_PWR_GPIO_BIT_12
+ * @arg @ref LL_PWR_GPIO_BIT_13
+ * @arg @ref LL_PWR_GPIO_BIT_14
+ * @arg @ref LL_PWR_GPIO_BIT_15
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledGPIOPullDown(uint32_t GPIO, uint32_t GPIONumber)
+{
+ register uint32_t temp = (uint32_t)(GPIO) + 4;
+ return (READ_BIT(*((uint32_t *)(temp)), GPIONumber) == (GPIONumber));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+ * @{
+ */
+
+/**
+ * @brief Get Internal Wake-up line Flag
+ * @rmtoll SR1 WUFI LL_PWR_IsActiveFlag_InternWU
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_InternWU(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUFI) == (PWR_SR1_WUFI));
+}
+
+/**
+ * @brief Get Stand-By Flag
+ * @rmtoll SR1 SBF LL_PWR_IsActiveFlag_SB
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_SBF) == (PWR_SR1_SBF));
+}
+
+/**
+ * @brief Get Wake-up Flag 5
+ * @rmtoll SR1 WUF5 LL_PWR_IsActiveFlag_WU5
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU5(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUF5) == (PWR_SR1_WUF5));
+}
+
+/**
+ * @brief Get Wake-up Flag 4
+ * @rmtoll SR1 WUF4 LL_PWR_IsActiveFlag_WU4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU4(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUF4) == (PWR_SR1_WUF4));
+}
+
+/**
+ * @brief Get Wake-up Flag 3
+ * @rmtoll SR1 WUF3 LL_PWR_IsActiveFlag_WU3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU3(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUF3) == (PWR_SR1_WUF3));
+}
+
+/**
+ * @brief Get Wake-up Flag 2
+ * @rmtoll SR1 WUF2 LL_PWR_IsActiveFlag_WU2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU2(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUF2) == (PWR_SR1_WUF2));
+}
+
+/**
+ * @brief Get Wake-up Flag 1
+ * @rmtoll SR1 WUF1 LL_PWR_IsActiveFlag_WU1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU1(void)
+{
+ return (READ_BIT(PWR->SR1, PWR_SR1_WUF1) == (PWR_SR1_WUF1));
+}
+
+/**
+ * @brief Clear Stand-By Flag
+ * @rmtoll SCR CSBF LL_PWR_ClearFlag_SB
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CSBF);
+}
+
+/**
+ * @brief Clear Wake-up Flags
+ * @rmtoll SCR CWUF LL_PWR_ClearFlag_WU
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF);
+}
+
+/**
+ * @brief Clear Wake-up Flag 5
+ * @rmtoll SCR CWUF5 LL_PWR_ClearFlag_WU5
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU5(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF5);
+}
+
+/**
+ * @brief Clear Wake-up Flag 4
+ * @rmtoll SCR CWUF4 LL_PWR_ClearFlag_WU4
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU4(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF4);
+}
+
+/**
+ * @brief Clear Wake-up Flag 3
+ * @rmtoll SCR CWUF3 LL_PWR_ClearFlag_WU3
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU3(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF3);
+}
+
+/**
+ * @brief Clear Wake-up Flag 2
+ * @rmtoll SCR CWUF2 LL_PWR_ClearFlag_WU2
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU2(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF2);
+}
+
+/**
+ * @brief Clear Wake-up Flag 1
+ * @rmtoll SCR CWUF1 LL_PWR_ClearFlag_WU1
+ * @retval None
+ */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU1(void)
+{
+ WRITE_REG(PWR->SCR, PWR_SCR_CWUF1);
+}
+
+/**
+ * @brief Indicate whether VDDA voltage is below or above PVM4 threshold
+ * @rmtoll SR2 PVMO4 LL_PWR_IsActiveFlag_PVMO4
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO4(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_PVMO4) == (PWR_SR2_PVMO4));
+}
+
+/**
+ * @brief Indicate whether VDDA voltage is below or above PVM3 threshold
+ * @rmtoll SR2 PVMO3 LL_PWR_IsActiveFlag_PVMO3
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO3(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_PVMO3) == (PWR_SR2_PVMO3));
+}
+
+#if defined(PWR_SR2_PVMO2)
+/**
+ * @brief Indicate whether VDDIO2 voltage is below or above PVM2 threshold
+ * @rmtoll SR2 PVMO2 LL_PWR_IsActiveFlag_PVMO2
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO2(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_PVMO2) == (PWR_SR2_PVMO2));
+}
+#endif /* PWR_SR2_PVMO2 */
+
+#if defined(USB_OTG_FS)
+/**
+ * @brief Indicate whether VDDUSB voltage is below or above PVM1 threshold
+ * @rmtoll SR2 PVMO1 LL_PWR_IsActiveFlag_PVMO1
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVMO1(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_PVMO1) == (PWR_SR2_PVMO1));
+}
+#endif /* USB_OTG_FS */
+
+/**
+ * @brief Indicate whether VDD voltage is below or above the selected PVD threshold
+ * @rmtoll SR2 PVDO LL_PWR_IsActiveFlag_PVDO
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_PVDO) == (PWR_SR2_PVDO));
+}
+
+/**
+ * @brief Indicate whether the regulator is ready in the selected voltage range or if its output voltage is still changing to the required voltage level
+ * @rmtoll SR2 VOSF LL_PWR_IsActiveFlag_VOSF
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VOSF(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_VOSF) == (PWR_SR2_VOSF));
+}
+
+/**
+ * @brief Indicate whether the regulator is ready in main mode or is in low-power mode
+ * @note: Take care, return value "0" means the regulator is ready. Return value "1" means the output voltage range is still changing.
+ * @rmtoll SR2 REGLPF LL_PWR_IsActiveFlag_REGLPF
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPF(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_REGLPF) == (PWR_SR2_REGLPF));
+}
+
+/**
+ * @brief Indicate whether or not the low-power regulator is ready
+ * @rmtoll SR2 REGLPS LL_PWR_IsActiveFlag_REGLPS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_REGLPS(void)
+{
+ return (READ_BIT(PWR->SR2, PWR_SR2_REGLPS) == (PWR_SR2_REGLPS));
+}
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(PWR) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/