TUKS MCU Introductory course
/
TUKS-COURSE-TIMER
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Diff: HAL_L476/stm32l4xx_ll_comp.h
- Revision:
- 1:d0dfbce63a89
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/HAL_L476/stm32l4xx_ll_comp.h Fri Feb 24 21:13:56 2017 +0000
@@ -0,0 +1,892 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_comp.h
+ * @author MCD Application Team
+ * @version V1.5.1
+ * @date 31-May-2016
+ * @brief Header file of COMP LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_COMP_H
+#define __STM32L4xx_LL_COMP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined (COMP1) || defined (COMP2)
+
+/** @defgroup COMP_LL COMP
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup COMP_LL_Private_Constants COMP Private Constants
+ * @{
+ */
+
+/* COMP registers bits positions */
+#define LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS ((uint32_t)30U) /* Value equivalent to POSITION_VAL(COMP_CSR_VALUE) */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup COMP_LL_ES_INIT COMP Exported Init structure
+ * @{
+ */
+
+/**
+ * @brief Structure definition of some features of COMP instance.
+ */
+typedef struct
+{
+ uint32_t PowerMode; /*!< Set comparator operating mode to adjust power and speed.
+ This parameter can be a value of @ref COMP_LL_EC_POWERMODE
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetPowerMode(). */
+
+ uint32_t InputPlus; /*!< Set comparator input plus (non-inverting input).
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_PLUS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputPlus(). */
+
+ uint32_t InputMinus; /*!< Set comparator input minus (inverting input).
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_MINUS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputMinus(). */
+
+ uint32_t InputHysteresis; /*!< Set comparator hysteresis mode of the input minus.
+ This parameter can be a value of @ref COMP_LL_EC_INPUT_HYSTERESIS
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetInputHysteresis(). */
+
+ uint32_t OutputPolarity; /*!< Set comparator output polarity.
+ This parameter can be a value of @ref COMP_LL_EC_OUTPUT_POLARITY
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputPolarity(). */
+
+ uint32_t OutputBlankingSource; /*!< Set comparator blanking source.
+ This parameter can be a value of @ref COMP_LL_EC_OUTPUT_BLANKING_SOURCE
+
+ This feature can be modified afterwards using unitary function @ref LL_COMP_SetOutputBlankingSource(). */
+
+} LL_COMP_InitTypeDef;
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Constants COMP Exported Constants
+ * @{
+ */
+
+/** @defgroup COMP_LL_EC_COMMON_WINDOWMODE Comparator common modes - Window mode
+ * @{
+ */
+#define LL_COMP_WINDOWMODE_DISABLE ((uint32_t)0x00000000U) /*!< Window mode disable: Comparators 1 and 2 are independent */
+#define LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON (COMP_CSR_WINMODE) /*!< Window mode enable: Comparators instances pair COMP1 and COMP2 have their input plus connected together. The common input is COMP1 input plus (COMP2 input plus is no more accessible). */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_POWERMODE Comparator modes - Power mode
+ * @{
+ */
+#define LL_COMP_POWERMODE_HIGHSPEED ((uint32_t)0x00000000U) /*!< COMP power mode to high speed */
+#define LL_COMP_POWERMODE_MEDIUMSPEED (COMP_CSR_PWRMODE_0) /*!< COMP power mode to medium speed */
+#define LL_COMP_POWERMODE_ULTRALOWPOWER (COMP_CSR_PWRMODE_1 | COMP_CSR_PWRMODE_0) /*!< COMP power mode to ultra-low power */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_PLUS Comparator inputs - Input plus (input non-inverting) selection
+ * @{
+ */
+#define LL_COMP_INPUT_PLUS_IO1 ((uint32_t)0x00000000U) /*!< Comparator input plus connected to IO1 (pin PC5 for COMP1, pin PB4 for COMP2) */
+#define LL_COMP_INPUT_PLUS_IO2 (COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO2 (pin PB2 for COMP1, pin PB6 for COMP2) */
+#if defined(COMP_CSR_INPSEL_1)
+#define LL_COMP_INPUT_PLUS_IO3 (COMP_CSR_INPSEL_1 | COMP_CSR_INPSEL_0) /*!< Comparator input plus connected to IO3 (pin PA1 for COMP1, pin PA3 for COMP2) */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_MINUS Comparator inputs - Input minus (input inverting) selection
+ * @{
+ */
+#define LL_COMP_INPUT_MINUS_1_4VREFINT ( COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/4 VrefInt */
+#define LL_COMP_INPUT_MINUS_1_2VREFINT ( COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 1/2 VrefInt */
+#define LL_COMP_INPUT_MINUS_3_4VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_SCALEN | COMP_CSR_BRGEN) /*!< Comparator input minus connected to 3/4 VrefInt */
+#define LL_COMP_INPUT_MINUS_VREFINT ( COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0 | COMP_CSR_SCALEN ) /*!< Comparator input minus connected to VrefInt */
+#define LL_COMP_INPUT_MINUS_DAC1_CH1 (COMP_CSR_INMSEL_2 ) /*!< Comparator input minus connected to DAC1 channel 1 (DAC_OUT1) */
+#define LL_COMP_INPUT_MINUS_DAC1_CH2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to DAC1 channel 2 (DAC_OUT2) */
+#define LL_COMP_INPUT_MINUS_IO1 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 ) /*!< Comparator input minus connected to IO1 (pin PB1 for COMP1, pin PB3 for COMP2) */
+#define LL_COMP_INPUT_MINUS_IO2 (COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO2 (pin PC4 for COMP1, pin PB7 for COMP2) */
+#if defined(COMP_CSR_INMESEL_1)
+#define LL_COMP_INPUT_MINUS_IO3 ( COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO3 (pin PA0 for COMP1, pin PA2 for COMP2) */
+#define LL_COMP_INPUT_MINUS_IO4 (COMP_CSR_INMESEL_1 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO4 (pin PA4 for COMP1, pin PA4 for COMP2) */
+#define LL_COMP_INPUT_MINUS_IO5 (COMP_CSR_INMESEL_1 | COMP_CSR_INMESEL_0 | COMP_CSR_INMSEL_2 | COMP_CSR_INMSEL_1 | COMP_CSR_INMSEL_0) /*!< Comparator input minus connected to IO5 (pin PA5 for COMP1, pin PA5 for COMP2) */
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_LEGACY Comparator inputs legacy literals name
+ * @{
+ */
+#define LL_COMP_WINDOWMODE_ENABLE LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+
+#define LL_COMP_INVERTINGINPUT_1_4VREFINT LL_COMP_INPUT_MINUS_1_4VREFINT
+#define LL_COMP_INVERTINGINPUT_1_2VREFINT LL_COMP_INPUT_MINUS_1_2VREFINT
+#define LL_COMP_INVERTINGINPUT_3_4VREFINT LL_COMP_INPUT_MINUS_3_4VREFINT
+#define LL_COMP_INVERTINGINPUT_VREFINT LL_COMP_INPUT_MINUS_VREFINT
+#define LL_COMP_INVERTINGINPUT_DAC1 LL_COMP_INPUT_MINUS_DAC1_CH1
+#define LL_COMP_INVERTINGINPUT_DAC2 LL_COMP_INPUT_MINUS_DAC1_CH2
+#define LL_COMP_INVERTINGINPUT_IO1 LL_COMP_INPUT_MINUS_IO1
+#define LL_COMP_INVERTINGINPUT_IO2 LL_COMP_INPUT_MINUS_IO2
+#if defined(COMP_CSR_INMESEL_1)
+#define LL_COMP_INVERTINGINPUT_IO3 LL_COMP_INPUT_MINUS_IO3
+#define LL_COMP_INVERTINGINPUT_IO4 LL_COMP_INPUT_MINUS_IO4
+#define LL_COMP_INVERTINGINPUT_IO5 LL_COMP_INPUT_MINUS_IO5
+#endif
+
+#define LL_COMP_NONINVERTINGINPUT_IO1 LL_COMP_INPUT_PLUS_IO1
+#define LL_COMP_NONINVERTINGINPUT_IO2 LL_COMP_INPUT_PLUS_IO2
+#if defined(COMP_CSR_INPSEL_1)
+#define LL_COMP_NONINVERTINGINPUT_IO3 LL_COMP_INPUT_PLUS_IO3
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_INPUT_HYSTERESIS Comparator input - Hysteresis
+ * @{
+ */
+#define LL_COMP_HYSTERESIS_NONE ((uint32_t)0x00000000U) /*!< No hysteresis */
+#define LL_COMP_HYSTERESIS_LOW ( COMP_CSR_HYST_0) /*!< Hysteresis level low */
+#define LL_COMP_HYSTERESIS_MEDIUM (COMP_CSR_HYST_1 ) /*!< Hysteresis level medium */
+#define LL_COMP_HYSTERESIS_HIGH (COMP_CSR_HYST_1 | COMP_CSR_HYST_0) /*!< Hysteresis level high */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_POLARITY Comparator output - Output polarity
+ * @{
+ */
+#define LL_COMP_OUTPUTPOL_NONINVERTED ((uint32_t)0x00000000U) /*!< COMP output polarity is not inverted: comparator output is high when the plus (non-inverting) input is at a higher voltage than the minus (inverting) input */
+#define LL_COMP_OUTPUTPOL_INVERTED (COMP_CSR_POLARITY) /*!< COMP output polarity is inverted: comparator output is low when the plus (non-inverting) input is at a lower voltage than the minus (inverting) input */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE Comparator output - Blanking source
+ * @{
+ */
+#define LL_COMP_BLANKINGSRC_NONE ((uint32_t)0x00000000U) /*!<Comparator output without blanking */
+#define LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (COMP_CSR_BLANKING_0) /*!< Comparator output blanking source TIM1 OC5 (specific to COMP instance: COMP1) */
+#define LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (COMP_CSR_BLANKING_1) /*!< Comparator output blanking source TIM2 OC3 (specific to COMP instance: COMP1) */
+#define LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (COMP_CSR_BLANKING_2) /*!< Comparator output blanking source TIM3 OC3 (specific to COMP instance: COMP1) */
+#define LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (COMP_CSR_BLANKING_0) /*!< Comparator output blanking source TIM3 OC4 (specific to COMP instance: COMP2) */
+#define LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (COMP_CSR_BLANKING_1) /*!< Comparator output blanking source TIM8 OC5 (specific to COMP instance: COMP2) */
+#define LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (COMP_CSR_BLANKING_2) /*!< Comparator output blanking source TIM15 OC1 (specific to COMP instance: COMP2) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_BLANKING_SOURCE_LEGACY Comparator output blanking source legacy literals name
+ * @{
+ */
+#define LL_COMP_BLANKINGSRC_TIM1_OC5 (LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1)
+#define LL_COMP_BLANKINGSRC_TIM2_OC3 (LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1)
+#define LL_COMP_BLANKINGSRC_TIM3_OC3 (LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1)
+
+#define LL_COMP_BLANKINGSRC_TIM3_OC4 (LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2)
+#define LL_COMP_BLANKINGSRC_TIM8_OC5 (LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2)
+#define LL_COMP_BLANKINGSRC_TIM15_OC1 (LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2)
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_OUTPUT_LEVEL Comparator output - Output level
+ * @{
+ */
+#define LL_COMP_OUTPUT_LEVEL_LOW ((uint32_t)0x00000000U) /*!< Comparator output level low (if the polarity is not inverted, otherwise to be complemented) */
+#define LL_COMP_OUTPUT_LEVEL_HIGH ((uint32_t)0x00000001U) /*!< Comparator output level high (if the polarity is not inverted, otherwise to be complemented) */
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EC_HW_DELAYS Definitions of COMP hardware constraints delays
+ * @note Only COMP IP HW delays are defined in COMP LL driver driver,
+ * not timeout values.
+ * For details on delays values, refer to descriptions in source code
+ * above each literal definition.
+ * @{
+ */
+
+/* Delay for comparator startup time. */
+/* Note: Delay required to reach propagation delay specification. */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tSTART"). */
+/* Unit: us */
+#define LL_COMP_DELAY_STARTUP_US ((uint32_t) 80U) /*!< Delay for COMP startup time */
+
+/* Delay for comparator voltage scaler stabilization time. */
+/* Note: Voltage scaler is used when selecting comparator input */
+/* based on VrefInt: VrefInt or subdivision of VrefInt. */
+/* Literal set to maximum value (refer to device datasheet, */
+/* parameter "tSTART_SCALER"). */
+/* Unit: us */
+#define LL_COMP_DELAY_VOLTAGE_SCALER_STAB_US ((uint32_t) 200U) /*!< Delay for COMP voltage scaler stabilization time */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Macros COMP Exported Macros
+ * @{
+ */
+/** @defgroup COMP_LL_EM_WRITE_READ Common write and read registers macro
+ * @{
+ */
+
+/**
+ * @brief Write a value in COMP register
+ * @param __INSTANCE__ comparator instance
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_COMP_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in COMP register
+ * @param __INSTANCE__ comparator instance
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_COMP_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EM_HELPER_MACRO COMP helper macro
+ * @{
+ */
+
+/**
+ * @brief Helper macro to select the COMP common instance
+ * to which is belonging the selected COMP instance.
+ * @note COMP common register instance can be used to
+ * set parameters common to several COMP instances.
+ * Refer to functions having argument "COMPxy_COMMON" as parameter.
+ * @param __COMPx__ COMP instance
+ * @retval COMP common instance or value "0" if there is no COMP common instance.
+ */
+#define __LL_COMP_COMMON_INSTANCE(__COMPx__) \
+ (COMP12_COMMON)
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup COMP_LL_Exported_Functions COMP Exported Functions
+ * @{
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_common Configuration of COMP hierarchical scope: common to several COMP instances
+ * @{
+ */
+
+/**
+ * @brief Set window mode of a pair of comparators instances
+ * (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).
+ * @rmtoll CSR WINMODE LL_COMP_SetCommonWindowMode
+ * @param COMPxy_COMMON Comparator common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
+ * @param WindowMode This parameter can be one of the following values:
+ * @arg @ref LL_COMP_WINDOWMODE_DISABLE
+ * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON, uint32_t WindowMode)
+{
+ /* Note: On this STM32 serie, window mode can be set only */
+ /* from COMP instance: COMP2. */
+ MODIFY_REG(COMPxy_COMMON->CSR, COMP_CSR_WINMODE, WindowMode);
+}
+
+/**
+ * @brief Get window mode of a pair of comparators instances
+ * (2 consecutive COMP instances odd and even COMP<x> and COMP<x+1>).
+ * @rmtoll CSR WINMODE LL_COMP_GetCommonWindowMode
+ * @param COMPxy_COMMON Comparator common instance
+ * (can be set directly from CMSIS definition or by using helper macro @ref __LL_COMP_COMMON_INSTANCE() )
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_WINDOWMODE_DISABLE
+ * @arg @ref LL_COMP_WINDOWMODE_COMP1_INPUT_PLUS_COMMON
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetCommonWindowMode(COMP_Common_TypeDef *COMPxy_COMMON)
+{
+ return (uint32_t)(READ_BIT(COMPxy_COMMON->CSR, COMP_CSR_WINMODE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_modes Configuration of comparator modes
+ * @{
+ */
+
+/**
+ * @brief Set comparator instance operating mode to adjust power and speed.
+ * @rmtoll CSR PWRMODE LL_COMP_SetPowerMode
+ * @param COMPx Comparator instance
+ * @param PowerMode This parameter can be one of the following values:
+ * @arg @ref LL_COMP_POWERMODE_HIGHSPEED
+ * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
+ * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetPowerMode(COMP_TypeDef *COMPx, uint32_t PowerMode)
+{
+ MODIFY_REG(COMPx->CSR, COMP_CSR_PWRMODE, PowerMode);
+}
+
+/**
+ * @brief Get comparator instance operating mode to adjust power and speed.
+ * @rmtoll CSR PWRMODE LL_COMP_GetPowerMode
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_POWERMODE_HIGHSPEED
+ * @arg @ref LL_COMP_POWERMODE_MEDIUMSPEED
+ * @arg @ref LL_COMP_POWERMODE_ULTRALOWPOWER
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetPowerMode(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_PWRMODE));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_inputs Configuration of comparator inputs
+ * @{
+ */
+
+/**
+ * @brief Set comparator inputs minus (inverting) and plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @note On this STM32 serie, scaler bridge is configurable:
+ * to optimize power consumption, this function enables the
+ * voltage scaler bridge only when required
+ * (when selecting comparator input based on VrefInt: VrefInt or
+ * subdivision of VrefInt).
+ * - For scaler bridge power consumption values,
+ * refer to device datasheet, parameter "IDDA(SCALER)".
+ * - Voltage scaler requires a delay for voltage stabilization.
+ * Refer to device datasheet, parameter "tSTART_SCALER".
+ * - Scaler bridge is common for all comparator instances,
+ * therefore if at least one of the comparator instance
+ * is requiring the scaler bridge, it remains enabled.
+ * @rmtoll CSR INMSEL LL_COMP_ConfigInputs\n
+ * CSR INPSEL LL_COMP_ConfigInputs\n
+ * CSR BRGEN LL_COMP_ConfigInputs\n
+ * CSR SCALEN LL_COMP_ConfigInputs
+ * @param COMPx Comparator instance
+ * @param InputMinus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ * @arg @ref LL_COMP_INPUT_MINUS_IO2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
+ *
+ * (*) Parameter not available on all devices.
+ * @param InputPlus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_IO2
+ * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
+ *
+ * (*) Parameter not available on all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_ConfigInputs(COMP_TypeDef *COMPx, uint32_t InputMinus, uint32_t InputPlus)
+{
+#if defined(COMP_CSR_INMESEL_1)
+ MODIFY_REG(COMPx->CSR,
+ COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_INPSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN,
+ InputMinus | InputPlus);
+#else
+ MODIFY_REG(COMPx->CSR,
+ COMP_CSR_INMSEL | COMP_CSR_INPSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN,
+ InputMinus | InputPlus);
+#endif
+}
+
+/**
+ * @brief Set comparator input plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR INPSEL LL_COMP_SetInputPlus
+ * @param COMPx Comparator instance
+ * @param InputPlus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_IO2
+ * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
+ *
+ * (*) Parameter not available on all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputPlus(COMP_TypeDef *COMPx, uint32_t InputPlus)
+{
+ MODIFY_REG(COMPx->CSR, COMP_CSR_INPSEL, InputPlus);
+}
+
+/**
+ * @brief Get comparator input plus (non-inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR INPSEL LL_COMP_GetInputPlus
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_PLUS_IO1
+ * @arg @ref LL_COMP_INPUT_PLUS_IO2
+ * @arg @ref LL_COMP_INPUT_PLUS_IO3 (*)
+ *
+ * (*) Parameter not available on all devices.
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputPlus(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INPSEL));
+}
+
+/**
+ * @brief Set comparator input minus (inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @note On this STM32 serie, scaler bridge is configurable:
+ * to optimize power consumption, this function enables the
+ * voltage scaler bridge only when required
+ * (when selecting comparator input based on VrefInt: VrefInt or
+ * subdivision of VrefInt).
+ * - For scaler bridge power consumption values,
+ * refer to device datasheet, parameter "IDDA(SCALER)".
+ * - Voltage scaler requires a delay for voltage stabilization.
+ * Refer to device datasheet, parameter "tSTART_SCALER".
+ * - Scaler bridge is common for all comparator instances,
+ * therefore if at least one of the comparator instance
+ * is requiring the scaler bridge, it remains enabled.
+ * @rmtoll CSR INMSEL LL_COMP_SetInputMinus\n
+ * CSR BRGEN LL_COMP_SetInputMinus\n
+ * CSR SCALEN LL_COMP_SetInputMinus
+ * @param COMPx Comparator instance
+ * @param InputMinus This parameter can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ * @arg @ref LL_COMP_INPUT_MINUS_IO2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
+ *
+ * (*) Parameter not available on all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputMinus(COMP_TypeDef *COMPx, uint32_t InputMinus)
+{
+#if defined(COMP_CSR_INMESEL_1)
+ MODIFY_REG(COMPx->CSR, COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, InputMinus);
+#else
+ MODIFY_REG(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN, InputMinus);
+#endif
+}
+
+/**
+ * @brief Get comparator input minus (inverting).
+ * @note In case of comparator input selected to be connected to IO:
+ * GPIO pins are specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR INMSEL LL_COMP_GetInputMinus\n
+ * CSR BRGEN LL_COMP_GetInputMinus\n
+ * CSR SCALEN LL_COMP_GetInputMinus
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_INPUT_MINUS_1_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_1_2VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_3_4VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_VREFINT
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH1
+ * @arg @ref LL_COMP_INPUT_MINUS_DAC1_CH2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO1
+ * @arg @ref LL_COMP_INPUT_MINUS_IO2
+ * @arg @ref LL_COMP_INPUT_MINUS_IO3 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO4 (*)
+ * @arg @ref LL_COMP_INPUT_MINUS_IO5 (*)
+ *
+ * (*) Parameter not available on all devices.
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputMinus(COMP_TypeDef *COMPx)
+{
+#if defined(COMP_CSR_INMESEL_1)
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMESEL | COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN));
+#else
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_INMSEL | COMP_CSR_SCALEN | COMP_CSR_BRGEN));
+#endif
+}
+
+/**
+ * @brief Set comparator instance hysteresis mode of the input minus (inverting input).
+ * @rmtoll CSR HYST LL_COMP_SetInputHysteresis
+ * @param COMPx Comparator instance
+ * @param InputHysteresis This parameter can be one of the following values:
+ * @arg @ref LL_COMP_HYSTERESIS_NONE
+ * @arg @ref LL_COMP_HYSTERESIS_LOW
+ * @arg @ref LL_COMP_HYSTERESIS_MEDIUM
+ * @arg @ref LL_COMP_HYSTERESIS_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetInputHysteresis(COMP_TypeDef *COMPx, uint32_t InputHysteresis)
+{
+ MODIFY_REG(COMPx->CSR, COMP_CSR_HYST, InputHysteresis);
+}
+
+/**
+ * @brief Get comparator instance hysteresis mode of the minus (inverting) input.
+ * @rmtoll CSR HYST LL_COMP_GetInputHysteresis
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_HYSTERESIS_NONE
+ * @arg @ref LL_COMP_HYSTERESIS_LOW
+ * @arg @ref LL_COMP_HYSTERESIS_MEDIUM
+ * @arg @ref LL_COMP_HYSTERESIS_HIGH
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetInputHysteresis(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_HYST));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_comparator_output Configuration of comparator output
+ * @{
+ */
+
+/**
+ * @brief Set comparator instance output polarity.
+ * @rmtoll CSR POLARITY LL_COMP_SetOutputPolarity
+ * @param COMPx Comparator instance
+ * @param OutputPolarity This parameter can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
+ * @arg @ref LL_COMP_OUTPUTPOL_INVERTED
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetOutputPolarity(COMP_TypeDef *COMPx, uint32_t OutputPolarity)
+{
+ MODIFY_REG(COMPx->CSR, COMP_CSR_POLARITY, OutputPolarity);
+}
+
+/**
+ * @brief Get comparator instance output polarity.
+ * @rmtoll CSR POLARITY LL_COMP_GetOutputPolarity
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUTPOL_NONINVERTED
+ * @arg @ref LL_COMP_OUTPUTPOL_INVERTED
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetOutputPolarity(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_POLARITY));
+}
+
+/**
+ * @brief Set comparator instance blanking source.
+ * @note Blanking source may be specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @note Availability of parameters of blanking source from timer
+ * depends on timers availability on the selected device.
+ * @rmtoll CSR BLANKING LL_COMP_SetOutputBlankingSource
+ * @param COMPx Comparator instance
+ * @param BlankingSource This parameter can be one of the following values:
+ * @arg @ref LL_COMP_BLANKINGSRC_NONE
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (1)(3)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (1)(3)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (1)(3)
+ *
+ * (1) Parameter availability depending on timer availability
+ * on the selected device.
+ * (2) On STM32L4, parameter available only on comparator instance: COMP1.
+ * (3) On STM32L4, parameter available only on comparator instance: COMP2.
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_SetOutputBlankingSource(COMP_TypeDef *COMPx, uint32_t BlankingSource)
+{
+ MODIFY_REG(COMPx->CSR, COMP_CSR_BLANKING, BlankingSource);
+}
+
+/**
+ * @brief Get comparator instance blanking source.
+ * @note Availability of parameters of blanking source from timer
+ * depends on timers availability on the selected device.
+ * @note Blanking source may be specific to each comparator instance.
+ * Refer to description of parameters or to reference manual.
+ * @rmtoll CSR BLANKING LL_COMP_GetOutputBlankingSource
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_BLANKINGSRC_NONE
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM1_OC5_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM2_OC3_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC3_COMP1 (1)(2)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM3_OC4_COMP2 (1)(3)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM8_OC5_COMP2 (1)(3)
+ * @arg @ref LL_COMP_BLANKINGSRC_TIM15_OC1_COMP2 (1)(3)
+ *
+ * (1) Parameter availability depending on timer availability
+ * on the selected device.
+ * (2) On STM32L4, parameter available only on comparator instance: COMP1.
+ * (3) On STM32L4, parameter available only on comparator instance: COMP2.
+ */
+__STATIC_INLINE uint32_t LL_COMP_GetOutputBlankingSource(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_BLANKING));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Configuration_Legacy_Functions Configuration of COMP, legacy functions name
+ * @{
+ */
+/* Old functions name kept for legacy purpose, to be replaced by the */
+/* current functions name. */
+__STATIC_INLINE void LL_COMP_SetInputNonInverting(COMP_TypeDef *COMPx, uint32_t InputNonInverting)
+{
+ LL_COMP_SetInputPlus(COMPx, InputNonInverting);
+}
+__STATIC_INLINE uint32_t LL_COMP_GetInputNonInverting(COMP_TypeDef *COMPx)
+{
+ return LL_COMP_GetInputPlus(COMPx);
+}
+
+__STATIC_INLINE void LL_COMP_SetInputInverting(COMP_TypeDef *COMPx, uint32_t InputInverting)
+{
+ LL_COMP_SetInputMinus(COMPx, InputInverting);
+}
+__STATIC_INLINE uint32_t LL_COMP_GetInputInverting(COMP_TypeDef *COMPx)
+{
+ return LL_COMP_GetInputMinus(COMPx);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup COMP_LL_EF_Operation Operation on comparator instance
+ * @{
+ */
+
+/**
+ * @brief Enable comparator instance.
+ * @note After enable from off state, comparator requires a delay
+ * to reach reach propagation delay specification.
+ * Refer to device datasheet, parameter "tSTART".
+ * @rmtoll CSR EN LL_COMP_Enable
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Enable(COMP_TypeDef *COMPx)
+{
+ SET_BIT(COMPx->CSR, COMP_CSR_EN);
+}
+
+/**
+ * @brief Disable comparator instance.
+ * @rmtoll CSR EN LL_COMP_Disable
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Disable(COMP_TypeDef *COMPx)
+{
+ CLEAR_BIT(COMPx->CSR, COMP_CSR_EN);
+}
+
+/**
+ * @brief Get comparator enable state
+ * (0: COMP is disabled, 1: COMP is enabled)
+ * @rmtoll CSR EN LL_COMP_IsEnabled
+ * @param COMPx Comparator instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_COMP_IsEnabled(COMP_TypeDef *COMPx)
+{
+ return (READ_BIT(COMPx->CSR, COMP_CSR_EN) == (COMP_CSR_EN));
+}
+
+/**
+ * @brief Lock comparator instance.
+ * @note Once locked, comparator configuration can be accessed in read-only.
+ * @note The only way to unlock the comparator is a device hardware reset.
+ * @rmtoll CSR LOCK LL_COMP_Lock
+ * @param COMPx Comparator instance
+ * @retval None
+ */
+__STATIC_INLINE void LL_COMP_Lock(COMP_TypeDef *COMPx)
+{
+ SET_BIT(COMPx->CSR, COMP_CSR_LOCK);
+}
+
+/**
+ * @brief Get comparator lock state
+ * (0: COMP is unlocked, 1: COMP is locked).
+ * @note Once locked, comparator configuration can be accessed in read-only.
+ * @note The only way to unlock the comparator is a device hardware reset.
+ * @rmtoll CSR LOCK LL_COMP_IsLocked
+ * @param COMPx Comparator instance
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_COMP_IsLocked(COMP_TypeDef *COMPx)
+{
+ return (READ_BIT(COMPx->CSR, COMP_CSR_LOCK) == (COMP_CSR_LOCK));
+}
+
+/**
+ * @brief Read comparator instance output level.
+ * @note The comparator output level depends on the selected polarity
+ * (Refer to function @ref LL_COMP_SetOutputPolarity()).
+ * If the comparator polarity is not inverted:
+ * - Comparator output is low when the input plus
+ * is at a lower voltage than the input minus
+ * - Comparator output is high when the input plus
+ * is at a higher voltage than the input minus
+ * If the comparator polarity is inverted:
+ * - Comparator output is high when the input plus
+ * is at a lower voltage than the input minus
+ * - Comparator output is low when the input plus
+ * is at a higher voltage than the input minus
+ * @rmtoll CSR VALUE LL_COMP_ReadOutputLevel
+ * @param COMPx Comparator instance
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_COMP_OUTPUT_LEVEL_LOW
+ * @arg @ref LL_COMP_OUTPUT_LEVEL_HIGH
+ */
+__STATIC_INLINE uint32_t LL_COMP_ReadOutputLevel(COMP_TypeDef *COMPx)
+{
+ return (uint32_t)(READ_BIT(COMPx->CSR, COMP_CSR_VALUE)
+ >> LL_COMP_OUTPUT_LEVEL_BITOFFSET_POS);
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup COMP_LL_EF_Init Initialization and de-initialization functions
+ * @{
+ */
+
+ErrorStatus LL_COMP_DeInit(COMP_TypeDef *COMPx);
+ErrorStatus LL_COMP_Init(COMP_TypeDef *COMPx, LL_COMP_InitTypeDef *COMP_InitStruct);
+void LL_COMP_StructInit(LL_COMP_InitTypeDef *COMP_InitStruct);
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* COMP1 || COMP2 */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/