Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
TUKS-COURSE-TIMER
by 
TUKS MCU Introductory course
Functions | |
| void | i2c_init (i2c_t *obj, PinName sda, PinName scl) |
| Initialize the I2C peripheral. | |
| void | i2c_frequency (i2c_t *obj, int hz) |
| Configure the I2C frequency. | |
| int | i2c_start (i2c_t *obj) |
| Send START command. | |
| int | i2c_stop (i2c_t *obj) |
| Send STOP command. | |
| int | i2c_read (i2c_t *obj, int address, char *data, int length, int stop) |
| Blocking reading data. | |
| int | i2c_write (i2c_t *obj, int address, const char *data, int length, int stop) |
| Blocking sending data. | |
| void | i2c_reset (i2c_t *obj) |
| Reset I2C peripheral. | |
| int | i2c_byte_read (i2c_t *obj, int last) |
| Read one byte. | |
| int | i2c_byte_write (i2c_t *obj, int data) |
| Write one byte. | |
Function Documentation
| int i2c_byte_read | ( | i2c_t * | obj, |
| int | last | ||
| ) |
Read one byte.
- Parameters:
-
obj The I2C object last Acknoledge
- Returns:
- The read byte
| int i2c_byte_write | ( | i2c_t * | obj, |
| int | data | ||
| ) |
Write one byte.
- Parameters:
-
obj The I2C object data Byte to be written
- Returns:
- 0 if NAK was received, 1 if ACK was received, 2 for timeout.
| void i2c_frequency | ( | i2c_t * | obj, |
| int | hz | ||
| ) |
Configure the I2C frequency.
- Parameters:
-
obj The I2C object hz Frequency in Hz
| void i2c_init | ( | i2c_t * | obj, |
| PinName | sda, | ||
| PinName | scl | ||
| ) |
Initialize the I2C peripheral.
It sets the default parameters for I2C peripheral, and configures its specifieds pins.
- Parameters:
-
obj The I2C object sda The sda pin scl The scl pin
| int i2c_read | ( | i2c_t * | obj, |
| int | address, | ||
| char * | data, | ||
| int | length, | ||
| int | stop | ||
| ) |
Blocking reading data.
- Parameters:
-
obj The I2C object address 7-bit address (last bit is 1) data The buffer for receiving length Number of bytes to read stop Stop to be generated after the transfer is done
- Returns:
- Number of read bytes
| void i2c_reset | ( | i2c_t * | obj ) |
Reset I2C peripheral.
TODO: The action here. Most of the implementation sends stop()
- Parameters:
-
obj The I2C object
| int i2c_start | ( | i2c_t * | obj ) |
Send START command.
- Parameters:
-
obj The I2C object
| int i2c_stop | ( | i2c_t * | obj ) |
Send STOP command.
- Parameters:
-
obj The I2C object
| int i2c_write | ( | i2c_t * | obj, |
| int | address, | ||
| const char * | data, | ||
| int | length, | ||
| int | stop | ||
| ) |
Blocking sending data.
- Parameters:
-
obj The I2C object address 7-bit address (last bit is 0) data The buffer for sending length Number of bytes to write stop Stop to be generated after the transfer is done
- Returns:
- zero or non-zero - Number of written bytes negative - I2C_ERROR_XXX status
Generated on Tue Jul 12 2022 17:38:59 by
1.7.2