TUKS MCU Introductory course / TUKS-COURSE-THERMOMETER

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of TUKS-COURSE-TIMER by TUKS MCU Introductory course

Embed: (wiki syntax)

« Back to documentation index

Time One Pulse functions
Functions

Time One Pulse functions
[TIM Exported Functions]

Time One Pulse functions. More...

Functions

HAL_StatusTypeDef HAL_TIM_OnePulse_Init (TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
 Initializes the TIM One Pulse Time Base according to the specified parameters in the TIM_HandleTypeDef and initialize the associated handle.
HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit (TIM_HandleTypeDef *htim)
 DeInitialize the TIM One Pulse.
__weak void HAL_TIM_OnePulse_MspInit (TIM_HandleTypeDef *htim)
 Initializes the TIM One Pulse MSP.
__weak void HAL_TIM_OnePulse_MspDeInit (TIM_HandleTypeDef *htim)
 DeInitialize TIM One Pulse MSP.
HAL_StatusTypeDef HAL_TIM_OnePulse_Start (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
 Starts the TIM One Pulse signal generation.
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
 Stops the TIM One Pulse signal generation.
HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
 Starts the TIM One Pulse signal generation in interrupt mode.
HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT (TIM_HandleTypeDef *htim, uint32_t OutputChannel)
 Stops the TIM One Pulse signal generation in interrupt mode.

Detailed Description

Time One Pulse functions. 

  ==============================================================================
                        ##### Time One Pulse functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to:
    (+) Initialize and configure the TIM One Pulse.
    (+) De-initialize the TIM One Pulse.
    (+) Start the Time One Pulse.
    (+) Stop the Time One Pulse.
    (+) Start the Time One Pulse and enable interrupt.
    (+) Stop the Time One Pulse and disable interrupt.
    (+) Start the Time One Pulse and enable DMA transfer.
    (+) Stop the Time One Pulse and disable DMA transfer.

Function Documentation

HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit ( TIM_HandleTypeDef *  htim )

DeInitialize the TIM One Pulse.

Parameters:
htim,:TIM One Pulse handle
Return values:
HALstatus

Definition at line 2027 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_OnePulse_Init ( TIM_HandleTypeDef *  htim,
uint32_t  OnePulseMode 
)

Initializes the TIM One Pulse Time Base according to the specified parameters in the TIM_HandleTypeDef and initialize the associated handle.

Parameters:
htim,:TIM OnePulse handle
OnePulseMode,:Select the One pulse mode. This parameter can be one of the following values:

  • TIM_OPMODE_SINGLE: Only one pulse will be generated.
  • TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
Return values:
HALstatus

Definition at line 1981 of file stm32l4xx_hal_tim.c.

__weak void HAL_TIM_OnePulse_MspDeInit ( TIM_HandleTypeDef *  htim )

DeInitialize TIM One Pulse MSP.

Parameters:
htim,:TIM handle
Return values:
None

Definition at line 2069 of file stm32l4xx_hal_tim.c.

__weak void HAL_TIM_OnePulse_MspInit ( TIM_HandleTypeDef *  htim )

Initializes the TIM One Pulse MSP.

Parameters:
htim,:TIM handle
Return values:
None

Definition at line 2054 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_OnePulse_Start ( TIM_HandleTypeDef *  htim,
uint32_t  OutputChannel 
)

Starts the TIM One Pulse signal generation.

Parameters:
htim: TIM One Pulse handle
OutputChannel: TIM Channels to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
Return values:
HALstatus

Definition at line 2088 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT ( TIM_HandleTypeDef *  htim,
uint32_t  OutputChannel 
)

Starts the TIM One Pulse signal generation in interrupt mode.

Parameters:
htim: TIM One Pulse handle
OutputChannel: TIM Channels to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
Return values:
HALstatus

Definition at line 2160 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_OnePulse_Stop ( TIM_HandleTypeDef *  htim,
uint32_t  OutputChannel 
)

Stops the TIM One Pulse signal generation.

Parameters:
htim: TIM One Pulse handle
OutputChannel: TIM Channels to be disable This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
Return values:
HALstatus

Definition at line 2124 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT ( TIM_HandleTypeDef *  htim,
uint32_t  OutputChannel 
)

Stops the TIM One Pulse signal generation in interrupt mode.

Parameters:
htim: TIM One Pulse handle
OutputChannel: TIM Channels to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
Return values:
HALstatus

Definition at line 2202 of file stm32l4xx_hal_tim.c.

Generated on Tue Jul 12 2022 17:38:54 by  doxygen 1.7.2