TUKS MCU Introductory course / TUKS-COURSE-THERMOMETER

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of TUKS-COURSE-TIMER by TUKS MCU Introductory course

Embed: (wiki syntax)

« Back to documentation index

Time PWM functions
Functions

Time PWM functions
[TIM Exported Functions]

Time PWM functions. More...

Functions

HAL_StatusTypeDef HAL_TIM_PWM_Init (TIM_HandleTypeDef *htim)
 Initializes the TIM PWM Time Base according to the specified parameters in the TIM_HandleTypeDef and initialize the associated handle.
HAL_StatusTypeDef HAL_TIM_PWM_DeInit (TIM_HandleTypeDef *htim)
 DeInitialize the TIM peripheral.
__weak void HAL_TIM_PWM_MspInit (TIM_HandleTypeDef *htim)
 Initializes the TIM PWM MSP.
__weak void HAL_TIM_PWM_MspDeInit (TIM_HandleTypeDef *htim)
 DeInitialize TIM PWM MSP.
HAL_StatusTypeDef HAL_TIM_PWM_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
 Starts the PWM signal generation.
HAL_StatusTypeDef HAL_TIM_PWM_Stop (TIM_HandleTypeDef *htim, uint32_t Channel)
 Stops the PWM signal generation.
HAL_StatusTypeDef HAL_TIM_PWM_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
 Starts the PWM signal generation in interrupt mode.
HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
 Stops the PWM signal generation in interrupt mode.
HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA (TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
 Starts the TIM PWM signal generation in DMA mode.
HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA (TIM_HandleTypeDef *htim, uint32_t Channel)
 Stops the TIM PWM signal generation in DMA mode.

Detailed Description

Time PWM functions. 

  ==============================================================================
                          ##### Time PWM functions #####
  ==============================================================================
  [..]
    This section provides functions allowing to:
    (+) Initialize and configure the TIM OPWM.
    (+) De-initialize the TIM PWM.
    (+) Start the Time PWM.
    (+) Stop the Time PWM.
    (+) Start the Time PWM and enable interrupt.
    (+) Stop the Time PWM and disable interrupt.
    (+) Start the Time PWM and enable DMA transfer.
    (+) Stop the Time PWM and disable DMA transfer.

Function Documentation

HAL_StatusTypeDef HAL_TIM_PWM_DeInit ( TIM_HandleTypeDef *  htim )

DeInitialize the TIM peripheral.

Parameters:
htim,:TIM handle
Return values:
HALstatus

Definition at line 1032 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Init ( TIM_HandleTypeDef *  htim )

Initializes the TIM PWM Time Base according to the specified parameters in the TIM_HandleTypeDef and initialize the associated handle.

Parameters:
htim,:TIM handle
Return values:
HALstatus

Definition at line 993 of file stm32l4xx_hal_tim.c.

__weak void HAL_TIM_PWM_MspDeInit ( TIM_HandleTypeDef *  htim )

DeInitialize TIM PWM MSP.

Parameters:
htim,:TIM handle
Return values:
None

Definition at line 1074 of file stm32l4xx_hal_tim.c.

__weak void HAL_TIM_PWM_MspInit ( TIM_HandleTypeDef *  htim )

Initializes the TIM PWM MSP.

Parameters:
htim,:TIM handle
Return values:
None

Definition at line 1059 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Start ( TIM_HandleTypeDef *  htim,
uint32_t  Channel 
)

Starts the PWM signal generation.

Parameters:
htim: TIM handle
Channel: TIM Channels to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
  • TIM_CHANNEL_5: TIM Channel 5 selected
  • TIM_CHANNEL_6: TIM Channel 6 selected
Return values:
HALstatus

Definition at line 1097 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA ( TIM_HandleTypeDef *  htim,
uint32_t  Channel,
uint32_t *  pData,
uint16_t  Length 
)

Starts the TIM PWM signal generation in DMA mode.

Parameters:
htim: TIM handle
Channel: TIM Channels to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
pData,:The source Buffer address.
Length,:The length of data to be transferred from memory to TIM peripheral
Return values:
HALstatus

Definition at line 1300 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Start_IT ( TIM_HandleTypeDef *  htim,
uint32_t  Channel 
)

Starts the PWM signal generation in interrupt mode.

Parameters:
htim: TIM handle
Channel: TIM Channel to be enabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
Return values:
HALstatus

Definition at line 1166 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Stop ( TIM_HandleTypeDef *  htim,
uint32_t  Channel 
)

Stops the PWM signal generation.

Parameters:
htim: TIM handle
Channel: TIM Channels to be disabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
  • TIM_CHANNEL_5: TIM Channel 5 selected
  • TIM_CHANNEL_6: TIM Channel 6 selected
Return values:
HALstatus

Definition at line 1131 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA ( TIM_HandleTypeDef *  htim,
uint32_t  Channel 
)

Stops the TIM PWM signal generation in DMA mode.

Parameters:
htim: TIM handle
Channel: TIM Channels to be disabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
Return values:
HALstatus

Definition at line 1417 of file stm32l4xx_hal_tim.c.

HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT ( TIM_HandleTypeDef *  htim,
uint32_t  Channel 
)

Stops the PWM signal generation in interrupt mode.

Parameters:
htim: TIM handle
Channel: TIM Channels to be disabled This parameter can be one of the following values:

  • TIM_CHANNEL_1: TIM Channel 1 selected
  • TIM_CHANNEL_2: TIM Channel 2 selected
  • TIM_CHANNEL_3: TIM Channel 3 selected
  • TIM_CHANNEL_4: TIM Channel 4 selected
Return values:
HALstatus

Definition at line 1232 of file stm32l4xx_hal_tim.c.

Generated on Tue Jul 12 2022 17:38:54 by  doxygen 1.7.2