TUKS MCU Introductory course / TUKS-COURSE-THERMOMETER

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of TUKS-COURSE-TIMER by TUKS MCU Introductory course

Embed: (wiki syntax)

« Back to documentation index

DBGMCU
Functions

DBGMCU
[SYSTEM Exported Functions]

Functions

__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID (void)
 Return the device identifier DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID.
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID (void)
 Return the device revision identifier.
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode (void)
 Enable the Debug Module during SLEEP mode DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode.
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode (void)
 Disable the Debug Module during SLEEP mode DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode.
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode (void)
 Enable the Debug Module during STOP mode DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode.
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode (void)
 Disable the Debug Module during STOP mode DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode.
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode (void)
 Enable the Debug Module during STANDBY mode DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode.
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode (void)
 Disable the Debug Module during STANDBY mode DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode.
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment (uint32_t PinAssignment)
 Set Trace pin assignment control DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment
DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment.
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment (void)
 Get Trace pin assignment control DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment
DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment.
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph (uint32_t Periphs)
 Freeze APB1 peripherals (group1 peripherals) DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph.
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph (uint32_t Periphs)
 Freeze APB1 peripherals (group2 peripherals) DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph.
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph (uint32_t Periphs)
 Unfreeze APB1 peripherals (group1 peripherals) DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph.
__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph (uint32_t Periphs)
 Unfreeze APB1 peripherals (group2 peripherals) DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph.
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph (uint32_t Periphs)
 Freeze APB2 peripherals DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph.
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph (uint32_t Periphs)
 Unfreeze APB2 peripherals DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph.

Function Documentation

__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph ( uint32_t  Periphs )

Freeze APB1 peripherals (group1 peripherals) DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB1_GRP1_TIM2_STOP
  • LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM6_STOP
  • LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
  • LL_DBGMCU_APB1_GRP1_RTC_STOP
  • LL_DBGMCU_APB1_GRP1_WWDG_STOP
  • LL_DBGMCU_APB1_GRP1_IWDG_STOP
  • LL_DBGMCU_APB1_GRP1_I2C1_STOP
  • LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
  • LL_DBGMCU_APB1_GRP1_I2C3_STOP
  • LL_DBGMCU_APB1_GRP1_CAN_STOP
  • LL_DBGMCU_APB1_GRP1_LPTIM1_STOP

(*) value not defined in all devices.

Return values:
None

Definition at line 1073 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph ( uint32_t  Periphs )

Unfreeze APB1 peripherals (group1 peripherals) DBGMCU_APB1FZR1 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB1_GRP1_TIM2_STOP
  • LL_DBGMCU_APB1_GRP1_TIM3_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM4_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM5_STOP (*)
  • LL_DBGMCU_APB1_GRP1_TIM6_STOP
  • LL_DBGMCU_APB1_GRP1_TIM7_STOP (*)
  • LL_DBGMCU_APB1_GRP1_RTC_STOP
  • LL_DBGMCU_APB1_GRP1_WWDG_STOP
  • LL_DBGMCU_APB1_GRP1_IWDG_STOP
  • LL_DBGMCU_APB1_GRP1_I2C1_STOP
  • LL_DBGMCU_APB1_GRP1_I2C2_STOP (*)
  • LL_DBGMCU_APB1_GRP1_I2C3_STOP
  • LL_DBGMCU_APB1_GRP1_CAN_STOP
  • LL_DBGMCU_APB1_GRP1_LPTIM1_STOP

(*) value not defined in all devices.

Return values:
None

Definition at line 1112 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_FreezePeriph ( uint32_t  Periphs )

Freeze APB1 peripherals (group2 peripherals) DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_FreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB1_GRP2_LPTIM2_STOP
Return values:
None

Definition at line 1085 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_APB1_GRP2_UnFreezePeriph ( uint32_t  Periphs )

Unfreeze APB1 peripherals (group2 peripherals) DBGMCU_APB1FZR2 DBG_xxxx_STOP LL_DBGMCU_APB1_GRP2_UnFreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB1_GRP2_LPTIM2_STOP
Return values:
None

Definition at line 1124 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph ( uint32_t  Periphs )

Freeze APB2 peripherals DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB2_GRP1_TIM1_STOP
  • LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
  • LL_DBGMCU_APB2_GRP1_TIM15_STOP
  • LL_DBGMCU_APB2_GRP1_TIM16_STOP
  • LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)

(*) value not defined in all devices.

Return values:
None

Definition at line 1142 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph ( uint32_t  Periphs )

Unfreeze APB2 peripherals DBGMCU_APB2FZ DBG_TIMx_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph.

Parameters:
PeriphsThis parameter can be a combination of the following values:

  • LL_DBGMCU_APB2_GRP1_TIM1_STOP
  • LL_DBGMCU_APB2_GRP1_TIM8_STOP (*)
  • LL_DBGMCU_APB2_GRP1_TIM15_STOP
  • LL_DBGMCU_APB2_GRP1_TIM16_STOP
  • LL_DBGMCU_APB2_GRP1_TIM17_STOP (*)

(*) value not defined in all devices.

Return values:
None

Definition at line 1160 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode ( void   )

Disable the Debug Module during SLEEP mode DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode.

Return values:
None

Definition at line 973 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode ( void   )

Disable the Debug Module during STANDBY mode DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode.

Return values:
None

Definition at line 1013 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode ( void   )

Disable the Debug Module during STOP mode DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode.

Return values:
None

Definition at line 993 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode ( void   )

Enable the Debug Module during SLEEP mode DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode.

Return values:
None

Definition at line 963 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode ( void   )

Enable the Debug Module during STANDBY mode DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode.

Return values:
None

Definition at line 1003 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode ( void   )

Enable the Debug Module during STOP mode DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode.

Return values:
None

Definition at line 983 of file stm32l4xx_ll_system.h.

__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID ( void   )

Return the device identifier DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID.

Return values:
Valuesbetween Min_Data=0x00 and Max_Data=0xFFFF (ex: device ID is 0x6415)

Definition at line 942 of file stm32l4xx_ll_system.h.

__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID ( void   )

Return the device revision identifier.

Note:
This field indicates the revision of the device. DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
Return values:
Valuesbetween Min_Data=0x00 and Max_Data=0xFFFF

Definition at line 953 of file stm32l4xx_ll_system.h.

__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment ( void   )

Get Trace pin assignment control DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment
DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment.

Return values:
Returnedvalue can be one of the following values:

  • LL_DBGMCU_TRACE_NONE
  • LL_DBGMCU_TRACE_ASYNCH
  • LL_DBGMCU_TRACE_SYNCH_SIZE1
  • LL_DBGMCU_TRACE_SYNCH_SIZE2
  • LL_DBGMCU_TRACE_SYNCH_SIZE4

Definition at line 1046 of file stm32l4xx_ll_system.h.

__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment ( uint32_t  PinAssignment )

Set Trace pin assignment control DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment
DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment.

Parameters:
PinAssignmentThis parameter can be one of the following values:

  • LL_DBGMCU_TRACE_NONE
  • LL_DBGMCU_TRACE_ASYNCH
  • LL_DBGMCU_TRACE_SYNCH_SIZE1
  • LL_DBGMCU_TRACE_SYNCH_SIZE2
  • LL_DBGMCU_TRACE_SYNCH_SIZE4
Return values:
None

Definition at line 1030 of file stm32l4xx_ll_system.h.

Generated on Tue Jul 12 2022 17:38:58 by  doxygen 1.7.2