TUKS MCU Introductory course / TUKS-COURSE-THERMOMETER

Important changes to repositories hosted on mbed.com

Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.

To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.

It is also possible to export all your personal repositories from the account settings page.

Fork of TUKS-COURSE-TIMER by TUKS MCU Introductory course

Embed: (wiki syntax)

« Back to documentation index

STM32L476G_DISCOVERY_GYROSCOPE_Exported_Functions
Functions

STM32L476G_DISCOVERY_GYROSCOPE_Exported_Functions
[STM32L476G-DISCOVERY GYROSCOPE]

Functions

uint8_t BSP_GYRO_Init (void)
 Initialize Gyroscope.
void BSP_GYRO_DeInit (void)
 DeInitialize Gyroscope.
void BSP_GYRO_LowPower (void)
 Put Gyroscope in low power mode.
uint8_t BSP_GYRO_ReadID (void)
 Read ID of Gyroscope component.
void BSP_GYRO_Reset (void)
 Reboot memory content of Gyroscope.
void BSP_GYRO_ITConfig (GYRO_InterruptConfigTypeDef *pIntConfig)
 Configure Gyroscope interrupts (INT1 or INT2).
void BSP_GYRO_EnableIT (uint8_t IntPin)
 Enable Gyroscope interrupts (INT1 or INT2).
void BSP_GYRO_DisableIT (uint8_t IntPin)
 Disable Gyroscope interrupts (INT1 or INT2).
void BSP_GYRO_GetXYZ (float *pfData)
 Get XYZ angular acceleration from the Gyroscope.

Function Documentation

void BSP_GYRO_DeInit ( void   )

DeInitialize Gyroscope.

Return values:
None

Definition at line 163 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_DisableIT ( uint8_t  IntPin )

Disable Gyroscope interrupts (INT1 or INT2).

Parameters:
IntPin,:Interrupt pin This parameter can be:

  • L3GD20_INT1
  • L3GD20_INT2
Return values:
None

Definition at line 262 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_EnableIT ( uint8_t  IntPin )

Enable Gyroscope interrupts (INT1 or INT2).

Parameters:
IntPin,:Interrupt pin This parameter can be:

  • L3GD20_INT1
  • L3GD20_INT2
Return values:
None

Definition at line 246 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_GetXYZ ( float *  pfData )

Get XYZ angular acceleration from the Gyroscope.

Parameters:
pfData,:pointer on floating array
Return values:
None

Definition at line 275 of file stm32l476g_discovery_gyroscope.c.

uint8_t BSP_GYRO_Init ( void   )

Initialize Gyroscope.

Return values:
GYRO_OKor GYRO_ERROR

Definition at line 105 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_ITConfig ( GYRO_InterruptConfigTypeDef *  pIntConfig )

Configure Gyroscope interrupts (INT1 or INT2).

Parameters:
pIntConfig,:pointer to a GYRO_InterruptConfigTypeDef structure that contains the configuration setting for the L3GD20 Interrupt.
Return values:
None

Definition at line 222 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_LowPower ( void   )

Put Gyroscope in low power mode.

Return values:
None

Definition at line 173 of file stm32l476g_discovery_gyroscope.c.

uint8_t BSP_GYRO_ReadID ( void   )

Read ID of Gyroscope component.

Return values:
ID

Definition at line 193 of file stm32l476g_discovery_gyroscope.c.

void BSP_GYRO_Reset ( void   )

Reboot memory content of Gyroscope.

Return values:
None

Definition at line 208 of file stm32l476g_discovery_gyroscope.c.

Generated on Tue Jul 12 2022 17:38:59 by  doxygen 1.7.2