Revision 0:2ba98068bc41, committed 2018-09-09

Comitter:

GaspardD

Date:

Sun Sep 09 12:55:53 2018 +0000

Commit message:

pour omar

Changed in this revision

diff -r 000000000000 -r 2ba98068bc41 main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sun Sep 09 12:55:53 2018 +0000
@@ -0,0 +1,39 @@
+#include "mbed.h"
+
+Serial pc(USBTX, USBRX); // tx, rx
+Serial device(A4,A5);  // tx, rx
+
+int dist;// LiDAR actually measured distance value
+int strength;// LiDAR signal strength
+int check;// check numerical value storage
+int i;
+int uart[9];// store data measured by LiDAR
+const int HEADER=0x59;// data package frame header
+
+int main()
+{
+    pc.baud(115200);
+    device.baud(115200);
+    int i=0;
+    pc.printf("Hello \n");
+    while(1) {
+        if (device.readable()) { //check whether the serial port has data input
+            if(device.getc()==HEADER) { // determine data package frame header 0x59
+                uart[0]=HEADER;
+                if(device.getc()==HEADER) { //determine data package frame header 0x59
+                    uart[1]=HEADER;
+                    for(i=2; i<9; i++) { // store data to array
+                        uart[i]=device.getc();
+                    }
+                    check=uart[0]+uart[1]+uart[2]+uart[3]+uart[4]+uart[5]+uart[6]+uart[7];
+                    if(uart[8]==(check&0xff)) { // check the received data as per protocols
+                        dist=uart[2]+uart[3]*256;// calculate distance value
+                        strength=uart[4]+uart[5]*256;// calculate signal strength value
+                        pc.printf("\rdist = %d strength = %d     ",dist,strength);// output signal strength value
+                    }
+                }
+            }
+        }
+    }
+}
+

diff -r 000000000000 -r 2ba98068bc41 mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Sun Sep 09 12:55:53 2018 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/users/mbed_official/code/mbed/builds/a7c7b631e539
\ No newline at end of file