File content as of revision 5:8e6835a94e10:

/* WS281X.cpp (for LPC82X/STM32F0x/STM32F746xx)
 * mbed Microcontroller Library
 * Copyright (c) 2016 muetch, t.kuroki, MIT License
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
 * and associated documentation files (the "Software"), to deal in the Software without restriction,
 * including without limitation the rights to use, copy, modify, merge, publish, distribute,
 * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all copies or
 * substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#include "WS281X.h"
#include "pinmap.h"

// TARGET_STM32F7
// TARGET_DISCO_F746NG
// TARGET_NUCLEO_F746ZG
// TARGET_STM32F0
// TARGET_NUCLEO_F030R8
// TARGET_NUCLEO_F070RB
// TARGET_LPC82X
// TARGET_LPC824

//----------------------------------------------------------------------------
WS281X::WS281X(PinName wirePin, PinMode pinMode, int numPixels, RGBOrder rgbOrder)
    : _wirePin(wirePin), _gpio(), _pixels(0)
{
    gpio_init_inout(&_gpio, wirePin, PIN_OUTPUT, pinMode, 0);
#if defined(TARGET_STM)
    pin_mode_ex(wirePin, pinMode);
#endif

    setRGBOrder(rgbOrder);

    if (numPixels < 1)
        numPixels = 1;
    else if (numPixels > MAX_PIXELS)
        numPixels = MAX_PIXELS;
    _numPixels = (uint16_t)numPixels;
    _pixels = new RGBColor[_numPixels];
    _dummyPixel = 0;

    clear();
}

WS281X::~WS281X()
{
    if (_pixels)
        delete[] _pixels;
}

#if defined(TARGET_STM)
void WS281X::pin_mode_ex(PinName pin, PinMode mode)
{
    if (mode == OpenDrain)
    {
        int port_index = STM_PORT(pin);
        int pin_index = STM_PIN(pin);
        int offset = pin_index << 1;

        GPIO_TypeDef * port_reg = ((GPIO_TypeDef *) (GPIOA_BASE + (port_index << 10)));
//        if (mode == OpenDrain)
        {
            port_reg->PUPDR &= ~(0x3 << offset);
            port_reg->OTYPER |= 1 << pin_index;
        }
    #if 0
        else
        {
            port_reg->OTYPER &= ~(1 << pin_index);
            port_reg->PUPDR &= ~(0x3 << offset);
            port_reg->PUPDR |= mode_ << offset;
        }
    #endif
    }
    else
        pin_mode(pin, mode);
}
#endif

void WS281X::setRGBOrder(RGBOrder rgbOrder)
{
    _rgbOrder = rgbOrder;
    switch(_rgbOrder)
    {
        case RGB:
            _1st = 0;
            _2nd = 1;
            _3rd = 2;
            break;

        case RBG:
            _1st = 0;
            _2nd = 2;
            _3rd = 1;
            break;

        case GRB:
            _1st = 1;
            _2nd = 0;
            _3rd = 2;
            break;

        case GBR:
            _1st = 2;
            _2nd = 0;
            _3rd = 1;
            break;

        case BRG:
            _1st = 1;
            _2nd = 2;
            _3rd = 0;
            break;

        case BGR:
            _1st = 2;
            _2nd = 1;
            _3rd = 0;
            break;

        default:
            _1st = 0;
            _2nd = 1;
            _3rd = 2;
            break;
    }
}

#define _nop1()     __nop()
#define _nop2()     __nop(); __nop()
#define _nop3()     _nop1(); _nop2()
#define _nop4()     _nop2(); _nop2()
#define _nop5()     _nop1(); _nop4()
#define _nop6()     _nop2(); _nop4()
#define _nop7()     _nop3(); _nop4()
#define _nop8()     _nop4(); _nop4()
#define _nop9()     _nop1(); _nop8()
#define _nop10()    _nop2(); _nop8()
#define _nop11()    _nop3(); _nop8()
#define _nop12()    _nop4(); _nop8()
#define _nop13()    _nop5(); _nop8()
#define _nop14()    _nop6(); _nop8()
#define _nop15()    _nop7(); _nop8()
#define _nop16()    _nop8(); _nop8()

#if defined(TARGET_LPC82X)
// LPCXpresso824-MAX (30MHz)
#define DELAY_T0H()     do{ _nop2(); }while(0)
#define DELAY_T1H()     do{ _nop6(); }while(0)
#define DELAY_TLOW()    do{ _nop6(); }while(0)
#define DELAY_TLOW2()   //do{ _nop2(); }while(0)
#define DELAY_SPACE()   do{ _nop4(); }while(0)
#define DELAY_NEXT()    //do{ _nop1(); }while(0)
#endif

#if defined(TARGET_STM32F0)
// NUCLEO-F030R8 (48MHz)
// NUCLEO-F070RB (48MHz)
#define DELAY_T0H()     do{ _nop8(); _nop4(); }while(0)
#define DELAY_T1H()     do{ _nop8(); _nop8(); }while(0)
#define DELAY_TLOW()    do{ _nop16(); }while(0)
#define DELAY_TLOW2()   //do{ _nop8(); _nop4(); }while(0)
#define DELAY_SPACE()   do{ _nop8(); _nop6(); }while(0)
#define DELAY_NEXT()    do{ _nop8(); }while(0)
#endif

#if defined(TARGET_NUCLEO_F746ZG)
// NUCLEO-F746ZG (216MHz)
#define T0H             (35)
#define T0L             (130-T0H)
#define T1H             (75)
#define T1L             (130-T1H)

#define DELAY_T0H()     _delay(T0H)
#define DELAY_T1H()     _delay(T1H-T0H)
#define DELAY_TLOW()    _delay(T1L)
#define DELAY_TLOW2()   //DELAY_TLOW()
#define DELAY_SPACE()   _delay(T1L+20)
#define DELAY_NEXT()    _delay(50)
#endif

#if defined(TARGET_DISCO_F746NG)
// TARGET_DISCO_F746NG (216MHz)
#define T0H             (35)
#define T0L             (110-T0H)
#define T1H             (75)
#define T1L             (110-T1H)

#define DELAY_T0H()     _delay(T0H)
#define DELAY_T1H()     _delay(T1H-T0H)
#define DELAY_TLOW()    _delay(T1L)
#define DELAY_TLOW2()   //DELAY_TLOW()
#define DELAY_SPACE()   _delay(T1L+5)
#define DELAY_NEXT()    _delay(50)
#endif

#if defined(TARGET_STM32F7)
inline __attribute__((always_inline))
void WS281X::_delay(int value)
{
    do { __nop(); } while (--value);
}
#endif

inline __attribute__((always_inline))
void WS281X::writeByte(__IO regsize_t *reg_set, __IO regsize_t *reg_clr, regsize_t *mask, uint8_t value)
{
    do
    {
    // bit7
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 7) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit6
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 6) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit5
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 5) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit4
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 4) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit3
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 3) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit2
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 2) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit1
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 1) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW();

    // bit0
        *reg_set = mask[0];
        DELAY_T0H();
        *reg_clr = mask[(value >> 0) & 1];
        DELAY_T1H();
        *reg_clr = mask[0];
        DELAY_TLOW2();

    } while (0);
}

void WS281X::show()
{
// CPU_FREQ = 30MHz -> 0.0333us/cycle
// WS2811 0: 0.25us+1.0us, 1: 1.0us+0.25us
// WS2812 0: 0.45us+0.8us, 1: 0.8us+0.45us

#if defined(TARGET_NXP)
    __IO uint32_t *reg_set = _gpio.reg_set;
    __IO uint32_t *reg_clr = _gpio.reg_clr;
    uint32_t mask[2] = { _gpio.mask, 0 };
#elif defined(TARGET_STM32F0) || defined(TARGET_STM32F1)
    __IO uint32_t *reg_set = _gpio.reg_set;
    __IO uint32_t *reg_clr = _gpio.reg_clr;
    uint32_t mask[2] = { _gpio.mask, 0 };
#elif defined(TARGET_STM)
    __IO uint16_t *reg_set = (__IO uint16_t *)_gpio.reg_set_clr;
    __IO uint16_t *reg_clr = reg_set + 1;
    uint16_t mask[2] = { _gpio.mask, 0 };
#endif

    uint8_t *pix = (uint8_t *)_pixels;
    uint8_t *end = pix + (_numPixels * sizeof(_pixels[0]));

    __disable_irq();   // Disable interrupts temporarily because we don't want our pulse timing to be messed up.

    uint8_t value;
    do
    {
        value = pix[_1st];
        writeByte(reg_set, reg_clr, mask, value);
        DELAY_SPACE();

        value = pix[_2nd];
        writeByte(reg_set, reg_clr, mask, value);
        DELAY_SPACE();

        value = pix[_3rd];
        writeByte(reg_set, reg_clr, mask, value);
        pix += sizeof(_pixels[0]);
        DELAY_NEXT();
    } while (pix < end);

    __enable_irq();   // Re-enable interrupts now that we are done.

    wait_us(50);
}

// 先頭から指定サイズ分のブロックをバッファの最後までコピーする
void WS281X::repeatBlock(int block_size)
{
    if (block_size < 1 || block_size >= _numPixels)
        return;

    RGBColor *dest = _pixels + block_size;
    int left = _numPixels - block_size;
    while (left > block_size)
    {
        memcpy(dest, _pixels, block_size * sizeof(_pixels[0]));
        dest += block_size;
        left -= block_size;
        block_size <<= 1;       // 次回は２倍のサイズの転送
    }
    memcpy(dest, _pixels, left * sizeof(_pixels[0]));
}

// 指定色でバッファを埋める
void WS281X::clear(RGBColor color)
{
    _pixels[0] = color;
    repeatBlock(1);
}

// 指定色でバッファを埋めた後表示
void WS281X::show(RGBColor color)
{
    clear(color);
    show();
}

//----------------------------------------------------------------------------