A program for IoT demonstration with mbed, EnOcean and MQTT.

Dependencies:   IBMIoTClientEthernetExample C12832 EthernetInterface MQTT USB400Serial USBHost mbed

Fork of IBMIoTClientEthernetExample by IBM Watson IoT

Revision:
9:58eb378727d9
Parent:
8:80d49dd91542
Child:
10:0b5e0dfee08e
diff -r 80d49dd91542 -r 58eb378727d9 EthernetInterface/EthernetInterface.h
--- a/EthernetInterface/EthernetInterface.h	Wed Oct 01 13:27:35 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,90 +0,0 @@
-/* EthernetInterface.h */
-/* Copyright (C) 2012 mbed.org, MIT License
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
- * and associated documentation files (the "Software"), to deal in the Software without restriction,
- * including without limitation the rights to use, copy, modify, merge, publish, distribute,
- * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in all copies or
- * substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
- * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
- * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
- */
- 
-#ifndef ETHERNETINTERFACE_H_
-#define ETHERNETINTERFACE_H_
-
-#if !defined(TARGET_LPC1768) && !defined(TARGET_LPC4088) && !defined(TARGET_K64F)
-#error The Ethernet Interface library is not supported on this target
-#endif
-
-#include "rtos.h"
-#include "lwip/netif.h"
-
- /** Interface using Ethernet to connect to an IP-based network
- *
- */
-class EthernetInterface {
-public:
-  /** Initialize the interface with DHCP.
-  * Initialize the interface and configure it to use DHCP (no connection at this point).
-  * \return 0 on success, a negative number on failure
-  */
-  static int init(); //With DHCP
-
-  /** Initialize the interface with a static IP address.
-  * Initialize the interface and configure it with the following static configuration (no connection at this point).
-  * \param ip the IP address to use
-  * \param mask the IP address mask
-  * \param gateway the gateway to use
-  * \return 0 on success, a negative number on failure
-  */
-  static int init(const char* ip, const char* mask, const char* gateway);
-
-  /** Connect
-  * Bring the interface up, start DHCP if needed.
-  * \param   timeout_ms  timeout in ms (default: (15)s).
-  * \return 0 on success, a negative number on failure
-  */
-  static int connect(unsigned int timeout_ms=15000);
-  
-  /** Disconnect
-  * Bring the interface down
-  * \return 0 on success, a negative number on failure
-  */
-  static int disconnect();
-  
-  /** Get the MAC address of your Ethernet interface
-   * \return a pointer to a string containing the MAC address
-   */
-  static char* getMACAddress();
-  
-  /** Get the IP address of your Ethernet interface
-   * \return a pointer to a string containing the IP address
-   */
-  static char* getIPAddress();
-
-  /** Get the Gateway address of your Ethernet interface
-   * \return a pointer to a string containing the Gateway address
-   */
-  static char* getGateway();
-
-  /** Get the Network mask of your Ethernet interface
-   * \return a pointer to a string containing the Network mask
-   */
-  static char* getNetworkMask();
-};
-
-#include "TCPSocketConnection.h"
-#include "TCPSocketServer.h"
-
-#include "Endpoint.h"
-#include "UDPSocket.h"
-
-#endif /* ETHERNETINTERFACE_H_ */