Diff: main.cpp

Revision:

0:0f0566c7c9f8

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Sat Dec 02 06:01:07 2017 +0000
@@ -0,0 +1,50 @@
+#include "mbed.h"
+#include "nRF24L01P.h"
+
+Serial pc(USBTX, USBRX); // tx, rx
+
+nRF24L01P my_nrf24l01p(PTD2, PTD3, PTD1, PTD0, PTD5, PTD4);    // MOSI, MISO, SCK, CSN, CE, IRQ
+DigitalOut RedLED(PTA5);
+
+int main()
+{
+    char count[2];
+    char TxDataCnt;
+    char temp;
+
+
+    my_nrf24l01p.powerUp();
+    my_nrf24l01p.setRfFrequency(2410);
+
+    // Display the (default) setup of the nRF24L01+ chip
+    pc.printf( "nRF24L01+ Frequency    : %d MHz\r\n",  my_nrf24l01p.getRfFrequency() );
+    pc.printf( "nRF24L01+ Output power : %d dBm\r\n",  my_nrf24l01p.getRfOutputPower() );
+    pc.printf( "nRF24L01+ Data Rate    : %d kbps\r\n", my_nrf24l01p.getAirDataRate() );
+    pc.printf( "nRF24L01+ TX Address   : 0x%010llX\r\n", my_nrf24l01p.getTxAddress() );
+    pc.printf( "nRF24L01+ RX Address   : 0x%010llX\r\n", my_nrf24l01p.getRxAddress() );
+
+    pc.printf( "Simple Transmitter (0 - 9 Counter) \r\n");
+
+    TxDataCnt = 2;
+    my_nrf24l01p.setTransferSize(TxDataCnt);
+
+    my_nrf24l01p.enable();
+
+    count[0] = 0x01;
+    count[1] = 0x01;
+
+    while (1) {
+
+        // Send the Transmit buffer via the nRF24L01+
+        temp = my_nrf24l01p.write( NRF24L01P_PIPE_P0,count, TxDataCnt );
+
+        pc.printf( "Sending %d - %d %d\r\n",temp,count[0],count[1]);
+
+        // Toggle LED1 (to help debug Host -> nRF24L01+ communication)
+        RedLED = !RedLED;
+            
+        count[1]++;
+        
+        wait(1);
+    }
+}