Šolski center Kranj / Mbed 2 deprecated 004-timer

Program which demonstrates the usage of the TIMER peripheral. Program sets TIMER 2 to blink the LED on the pin P0.9. This is a more sophisticated way of blinking an LED.

Dependencies:   mbed

LPC4088-gpio.h

Committer:
71GA
Date:
2015-05-02
Revision:
0:e83c998e1cfd

File content as of revision 0:e83c998e1cfd:

//definicija registrov za periferijo GPIO

//GPIO
#define DIR0           (*((volatile unsigned int *) 0x20098000))    //Port0
#define MASK0          (*((volatile unsigned int *) 0x20098010))
#define PIN0           (*((volatile unsigned int *) 0x20098014))
#define SET0           (*((volatile unsigned int *) 0x20098018))
#define CLR0           (*((volatile unsigned int *) 0x2009801C))

#define DIR1           (*((volatile unsigned int *) 0x20098020))    //Port1
#define MASK1          (*((volatile unsigned int *) 0x20098030))
#define PIN1           (*((volatile unsigned int *) 0x20098034))
#define SET1           (*((volatile unsigned int *) 0x20098038))
#define CLR1           (*((volatile unsigned int *) 0x2009803C))

#define DIR2           (*((volatile unsigned int *) 0x20098040))    //Port2
#define MASK2          (*((volatile unsigned int *) 0x20098050))
#define PIN2           (*((volatile unsigned int *) 0x20098054))
#define SET2           (*((volatile unsigned int *) 0x20098058))
#define CLR2           (*((volatile unsigned int *) 0x2009805C))

#define DIR3           (*((volatile unsigned int *) 0x20098060))    //Port3
#define MASK3          (*((volatile unsigned int *) 0x20098070))
#define PIN3           (*((volatile unsigned int *) 0x20098074))
#define SET3           (*((volatile unsigned int *) 0x20098078))
#define CLR3           (*((volatile unsigned int *) 0x2009807C))

#define DIR4           (*((volatile unsigned int *) 0x20098080))    //Port4
#define MASK4          (*((volatile unsigned int *) 0x20098090))
#define PIN4           (*((volatile unsigned int *) 0x20098094))
#define SET4           (*((volatile unsigned int *) 0x20098098))
#define CLR4           (*((volatile unsigned int *) 0x2009809C))

#define DIR5           (*((volatile unsigned int *) 0x200980A0))    //Port5
#define MASK5          (*((volatile unsigned int *) 0x200980B0))
#define PIN5           (*((volatile unsigned int *) 0x200980B4))
#define SET5           (*((volatile unsigned int *) 0x200980B8))
#define CLR5           (*((volatile unsigned int *) 0x200980BC))


//GPIO interrupts
#define int_STATUS     (*((volatile unsigned int *) 0x40028080))
#define int_STATR0     (*((volatile unsigned int *) 0x40028084))
#define int_STATF0     (*((volatile unsigned int *) 0x40028088))
#define int_CLR0       (*((volatile unsigned int *) 0x4002808C))
#define int_ENR0       (*((volatile unsigned int *) 0x40028090))
#define int_ENF0       (*((volatile unsigned int *) 0x40028094))
#define int_STATR2     (*((volatile unsigned int *) 0x400280A4))
#define int_STATF2     (*((volatile unsigned int *) 0x400280A8))
#define int_CLR2       (*((volatile unsigned int *) 0x400280AC))
#define int_ENR2       (*((volatile unsigned int *) 0x400280B0))
#define int_ENF2       (*((volatile unsigned int *) 0x400280B4))