![](/media/cache/group/mouse.jpg.50x50_q85.jpg)
Full layout 'HUB' with functioning navigation between all screens and active temp/state display
Dependencies: ID12RFID SPI_TFT_ILI9341 TFT_fonts mbed
Fork of Welcome_Screen_TFT by
main.cpp
- Committer:
- cstevens
- Date:
- 2016-06-14
- Revision:
- 6:18c7288b5e00
- Parent:
- 5:424af4fa03ab
- Child:
- 7:ceeced183454
File content as of revision 6:18c7288b5e00:
// example to test the TFT Display from Mikroelectronika #include "stdio.h" #include "mbed.h" #include "SPI_TFT_ILI9341.h" #include "string" #include "Arial12x12.h" #include "Arial24x23.h" #include "Arial28x28.h" #include "font_big.h" Serial pc (USBTX,USBRX); // the display has a backlight switch on board DigitalOut LCD_LED(PTA13); // may not be needed on mikroelectronika board DigitalOut pwr(PTD7); // ditto // the TFT is connected to SPI pin 5-7 //SPI_TFT_ILI9341 TFT(p5, p6, p7, p8, p9, p10,"TFT"); // mosi, miso, sclk, cs, reset, dc for lpc1768 SPI_TFT_ILI9341 TFT(PTD2, PTD3, PTD1, PTD5, PTD0, PTA13,"TFT"); // mosi, miso, sclk, cs, reset, dc for frdmkl25z //NB better combination to use a coherent 2x4 block for lcd // SPI_TFT_ILI9341 TFT(PTD2, PTD3, PTD1, PTA16, PTA17, PTC16,"TFT"); // mosi, miso, sclk, cs, reset, dc for frdmkl25z // DigitalOut LCD_LED(PTC17); // Subroutine to read the x location of the touch point // need to set x+ to 3V and ground x- then read analogue voltage on ym //nb need to add a check for actual touch as opposed to random crap int readX() { AnalogIn yp(PTB2); AnalogIn ym(PTB3); DigitalOut xp(PTB0); DigitalOut xm(PTB1); xp=1; // set positive sdie of x high xm=0; // dont need to do anyhting to set low side as it should be fine. // but do need to disconnect yp //yp.PinMode(PullNone) int xval=(int)ym.read_u16(); // get value return(xval); } // subroutine to read y values - has different pin functions .. int readY() { DigitalOut yp(PTB2); DigitalOut ym(PTB3); AnalogIn xp(PTB0); AnalogIn xm(PTB1); yp=1; // set positive sdie of x high ym=0; // dont need to do anyhting to set low side as it should be fine. // but do need to disconnect yp //yp.PinMode(PullNone) int yval=(int)xm.read_u16(); // get value return(yval); } int main() { pc.baud(115200); int xpos=0,ypos=0,xp=0,yp=0; pwr=1; wait(0.2); int i; LCD_LED = 1; // backlight on TFT.claim(stdout); // send stdout to the TFT display TFT.set_orientation(1); TFT.background(Black); // set background to black TFT.foreground(White); // set chars to white TFT.cls(); // clear the screen //first show the 4 directions TFT.set_orientation(0); TFT.background(Black); TFT.cls(); TFT.set_font((unsigned char*) Arial12x12); TFT.locate(0,0); printf(" 0 Hello Mbed 0"); TFT.set_orientation(1); TFT.locate(0,0); printf(" 1 Hello Mbed 1"); TFT.set_orientation(2); TFT.locate(0,0); printf(" 2 Hello Mbed 2"); TFT.set_orientation(3); TFT.locate(0,0); printf(" 3 Hello Mbed 3"); TFT.set_orientation(3); TFT.set_font((unsigned char*) Arial24x23); TFT.locate(50,100); TFT.printf("TFT orientation 3"); TFT.set_orientation(1); for(i=0; i<10; i++) { wait(1); // wait one seconds TFT.locate(50,160); TFT.printf("count %d",i); } TFT.set_orientation(1); TFT.cls(); // LCD_LED = 1; TFT.circle(120,120,10,0xffff); while(1==1) { xpos=readX(); ypos=readY(); pc.printf("xpos=%d\t,\typo=%d",xpos,ypos); xp=(240*xpos)/60000; yp=(320*ypos)/60000; pc.printf("\txp=%d\t,\typo=%d\n\r",xp,yp); if(xp>5 && yp>5) TFT.circle(xp,yp,5,Yellow); wait(0.1); } }