Revision 0:7de36d52cfef, committed 2017-06-12

Comitter:

niklasjakob

Date:

Mon Jun 12 17:12:31 2017 +0000

Commit message:

BLE MIDI BRIDGE TEST

Changed in this revision

diff -r 000000000000 -r 7de36d52cfef BLE_API.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/BLE_API.lib	Mon Jun 12 17:12:31 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/Bluetooth-Low-Energy/code/BLE_API/#65474dc93927

diff -r 000000000000 -r 7de36d52cfef LEDService.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/LEDService.h	Mon Jun 12 17:12:31 2017 +0000
@@ -0,0 +1,72 @@
+
+/*
+ *  Copyright (c) 2016 Samuele Cornell  
+ *
+ *  Permission is hereby granted, free of charge, to any person obtaining a copy
+ *  of this software and associated documentation files (the "Software"), to deal
+ *  in the Software without restriction, including without limitation the rights
+ *  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ *  copies of the Software, and to permit persons to whom the Software is
+ *  furnished to do so, subject to the following conditions:
+ *
+ *  The above copyright notice and this permission notice shall be included in all
+ *  copies or substantial portions of the Software.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ *  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ *  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ *  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ *  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ *  SOFTWARE.
+ *
+ */
+
+#define UART_RX_PIN USBRX// RX  UART Pin  
+
+#define UART_TX_PIN USBTX// TX UART Pin 
+
+// i have used DFRobot MIDI Shield but there are other commercially available similar products, also it is possible to interface directly a MIDI cable via an optocoupler (several projects are already available online ) 
+
+#define LIGHT_SHOW 1 // 0 if visual feedback isn't needed  (saves energy )
+
+#define TX_LED D6 // the state of this led will change whenever a message is to be sent over ble-midi
+
+#define RX_LED D7 // the state of this led will change whenever a message received over ble-midi
+
+
+/*******************************************************************************************************
+PERFORMANCE TWEAKS
+*******************************************************************************************************/
+
+
+#define BUFSERIAL_LENGHT 256 // define the software circular buffer lenght used for the UART. 
+
+
+#define ONLY_MIDI_to_BLEMIDI 1 // if only unidirectional MIDI to BLE-MIDI is desired set this to 1  
+
+
+#define ONLY_BLEMIDI_to_MIDI 1 // if only unidirectional BLE-MIDI to MIDI is desired set this to 1 
+
+// unidirectional operation allows to save energy. It also leads to better performance as if ONLY MIDI to BLE MIDI is required, for example it is  possible to shorten the SENDBLE_INTERVAL
+// without reliability issues (to a certain extent).   
+
+#define SENDBLEMIDI_INTERVAL 0.01 // this defines how frequently MIDI Events from the UART are polled, parsed and then sent via BLE-MIDI. 
+                                 // a lower value means less latency but it also increase energy comsuption and if is set too low can cause reliability issues in MIDI to BLE-MIDI operation (especially for long SysEx messages).  
+
+
+/***************************************************************************************************************
+CONNECTION PARAMETERS 
+***************************************************************************************************************/
+
+namespace Config { 
+
+// 
+const int minConnectionInterval = 6; // (1.25 ms units)  
+const int maxConnectionInterval = 15; // (1.25 ms units)
+const int slaveLatency          = 0;
+const int supervisionTimeout    = 500; // (10 ms units)
+
+
+
+} 

diff -r 000000000000 -r 7de36d52cfef main.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Mon Jun 12 17:12:31 2017 +0000
@@ -0,0 +1,409 @@
+/*  
+ *  Copyright (c) 2016 Samuele Cornell  
+ *
+ *  Permission is hereby granted, free of charge, to any person obtaining a copy
+ *  of this software and associated documentation files (the "Software"), to deal
+ *  in the Software without restriction, including without limitation the rights
+ *  to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ *  copies of the Software, and to permit persons to whom the Software is
+ *  furnished to do so, subject to the following conditions:
+ *
+ *  The above copyright notice and this permission notice shall be included in all
+ *  copies or substantial portions of the Software.
+ *
+ *  THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ *  IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ *  FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ *  AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ *  LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ *  OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ *  SOFTWARE.
+ *
+ */
+ 
+ /*
+ *   Thanks to Matthias Frick and his project blidino https://github.com/sieren/blidino 
+ *   which also uses RedBearslab nRF51822 and implements a USB-MIDI to BLE-MIDI bridge. 
+ *   His work made this possible and served as the main inspiration for this project . 
+ *   The content of BLEMIDI_MIDI_Parser.h file is for the most part taken from his blidino project.  
+ */
+
+#include "mbed.h"
+
+#include "ble/BLE.h"
+
+#include "LEDService.h"
+
+Serial UART(UART_TX_PIN,UART_RX_PIN) ; //UART_RX_PIN,BUFSERIAL_LENGHT  
+
+#if ONLY_MIDI_to_BLEMIDI==0 
+
+#include "BLEMIDI_MIDI_Parser.h" 
+
+#endif
+
+#if ONLY_BLEMIDI_to_MIDI==0   
+
+#include "MIDI_BLEMIDI_Parser.h"
+
+#endif
+
+
+
+#define TXRX_BUF_LEN                    20 
+
+#define RX_BUF_LEN                      256 
+
+
+#if LIGHT_SHOW==1
+DigitalOut redled(P0_20);  // sets the two LEDS on the MIDI Shield as outputs, these will be used as a visual feedback for debug 
+DigitalOut greenled(P0_19); //
+#endif 
+
+
+/******************************************************************************************************************************
+*INITIALIZE VARIABLES, BUFFERS and BLE-MIDI Service and Characteristic
+******************************************************************************************************************************/
+
+Ticker sendBLEMIDI_Ticker ; 
+Ticker sendData_Ticker ; 
+ 
+Timer t; // timer used for BLE-MIDI timestamps 
+
+bool isConnected; 
+
+
+////////////////////////////////////////////
+bool sendBLEMIDI_flag = false ; 
+
+////////////
+
+
+BLEDevice ble; // BLE_API  
+
+static Gap::ConnectionParams_t connectionParams;
+
+
+// MIDI BLE Service and Characteristic UUID ( see Apple BLE-MIDI Spec. and Midi manufacter Association BLE-MIDI Spec.) 
+
+static const uint8_t service_uuid[] = {0x03, 0xB8, 0x0E, 0x5A, 0xED, 0xE8, 0x4B, 0x33, 0xA7, 0x51, 0x6C, 0xE3, 0x4E, 0xC4, 0xC7, 0};
+static const uint8_t characteristic_uuid[]   = {0x77, 0x72, 0xE5, 0xDB, 0x38, 0x68, 0x41, 0x12, 0xA1, 0xA9, 0xF2, 0x66, 0x9D, 0x10, 0x6B, 0xF3};
+
+static const uint8_t service_uuid_rev[] = {0, 0xC7, 0xC4, 0x4E, 0xE3, 0x6C, 0x51, 0xA7, 0x33, 0x4B, 0xE8, 0xED, 0x5A, 0x0E, 0xB8, 0x03};
+
+uint8_t txPayload[TXRX_BUF_LEN] = {0,};
+
+
+GattCharacteristic  midiCharacteristic(characteristic_uuid, txPayload, 0, 20,GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE |
+                                                   GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE |
+                                                                   GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_NOTIFY |
+                                                                     GattCharacteristic::BLE_GATT_CHAR_PROPERTIES_READ);
+
+GattCharacteristic *midiChars[] = {&midiCharacteristic};
+GattService BLEMIDIService(service_uuid, midiChars,sizeof(midiChars) / sizeof(GattCharacteristic *));
+ 
+ 
+                                
+/*********************************************************************************************************************
+MIDI to BLE-MIDI  
+*********************************************************************************************************************/
+
+                                
+#if ONLY_BLEMIDI_to_MIDI==0     
+               
+
+void sendBLEMIDI_Callback (void)
+{
+
+    sendBLEMIDI_flag = true ; 
+    
+    /**** This callback is called within an ISR with frequency set by the sendBLEMIDI_Ticker, because it is called in an Interrupt context it is preferably 
+    doing the MIDI to BLEMIDI task in the main, the callback only set a flag which would be checked in the main loop. 
+    This is because all the BLEMIDI to MIDI conversion is already performed within Interrupt context. ( thus as a consequence BLEMIDI to MIDI has higher priority )  
+    *****/
+}
+
+
+
+void sendBLEMIDI(void) 
+{
+
+ 
+// MIDI::MIDI_to_BLEMIDI_Parser() parses incoming MIDI events from the UART (see MIDI_BLEMIDI_Parser.h) 
+    if(isConnected == true && MIDI::MIDI_to_BLEMIDI_Parser()==true) {
+
+        // a valid MIDI message has been parsed from the UART buffer
+
+#if LIGHT_SHOW==1
+        greenled = !(greenled);
+#endif
+
+        uint8_t BLEmidi_out[SysExMaxSize] ;
+        uint8_t SysEx_Array_lenght ;
+
+        uint16_t ticks = t.read_us() & 0x1fff; // read timer for timestamps 
+
+        if(MIDI::mMessage.sysexArray[0] == MIDI::SystemExclusive)   { // message is  SysEx
+
+
+            SysEx_Array_lenght = MIDI::mMessage.getSysExSize() ; // get SysEx message lenght
+
+            uint8_t position = 0; // position for SysexArray 
+
+            // header
+           
+            BLEmidi_out[position++] = 0x80 | ((ticks >> 7) & 0x3f); // header & timestampHigh
+            BLEmidi_out[position++] = 0x80 | (ticks & 0x7f); // timestampLow
+
+            for (int i = 0; i < SysEx_Array_lenght; i++) {
+                if (i == SysEx_Array_lenght - 1) {
+                    // modify last byte
+                    BLEmidi_out[position++] = 0x80 | (ticks & 0x7f);
+
+                    if (position == 20) {
+                        
+                        
+                        ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out, 20);
+
+                        position = 0;
+                        // header
+                        BLEmidi_out[position++] = 0x80 | (ticks >> 7) & 0x3f;
+                    }
+                }
+                BLEmidi_out[position++] = MIDI::mMessage.sysexArray[i];
+                if (position == 20) {
+                  ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out, 20);
+                
+                    position = 0;
+                    // header
+                    BLEmidi_out[position++] = 0x80 | (ticks >> 7) & 0x3f;
+                }
+
+                ticks = t.read_us() & 0x1fff;
+            }
+
+            if (position > 0) {
+                // send remains
+             ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out, position);
+             
+            }
+            
+           
+            MIDI::mMessage.sysexArray[0]= 0 ; // reset
+
+        } 
+
+
+        // message is not SysEx
+        
+        
+        else {
+            
+            
+            if(MIDI::mMessage.data1 == 0 ) { // no data1 only status 
+            
+            BLEmidi_out[0] = 0x80 | ((ticks >> 7) & 0x3f);
+            BLEmidi_out[1] = 0x80 | (ticks & 0x7f);
+            BLEmidi_out[2] = MIDI::mMessage.channel+MIDI::mMessage.type;
+        
+             ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out , 3);
+            
+            }
+            
+            if(MIDI::mMessage.data2 == 0 ) { // no data2 
+            
+            BLEmidi_out[0] = 0x80 | ((ticks >> 7) & 0x3f);
+            BLEmidi_out[1] = 0x80 | (ticks & 0x7f);
+            BLEmidi_out[2] = MIDI::mMessage.channel+MIDI::mMessage.type;
+            BLEmidi_out[3] = MIDI::mMessage.data1 ;
+
+            ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out , 4);
+            
+            } 
+            
+            if(MIDI::mMessage.data2 != 0 ) { 
+            
+            BLEmidi_out[0] = 0x80 | ((ticks >> 7) & 0x3f);
+            BLEmidi_out[1] = 0x80 | (ticks & 0x7f);
+            BLEmidi_out[2] = MIDI::mMessage.channel+MIDI::mMessage.type;
+            BLEmidi_out[3] = MIDI::mMessage.data1 ;
+            BLEmidi_out[4] = MIDI::mMessage.data2 ;
+
+            ble.updateCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(), BLEmidi_out , 5);
+            
+            } 
+
+        }// end else
+
+    }// outer if
+
+// invalid message or not connected
+
+}
+
+#endif 
+
+
+/******************************************************************************************************************************
+* BLE CALLBACKS 
+******************************************************************************************************************************/
+ 
+                                
+void disconnectionCallback(const Gap::DisconnectionCallbackParams_t *params) 
+{
+    //device disconnected 
+    
+    isConnected = false ; 
+    
+#if ONLY_BLEMIDI_to_MIDI==0   
+   sendBLEMIDI_Ticker.detach() ; // stop Ticker to save energy 
+#endif
+    
+    ble.startAdvertising(); // start advertising
+}
+
+
+void connectionCallback(const Gap::ConnectionCallbackParams_t* params) {
+
+
+isConnected=true ; 
+
+// try update conn.parameters 
+
+connectionParams.minConnectionInterval        = Config::minConnectionInterval;
+connectionParams.maxConnectionInterval        = Config::maxConnectionInterval;
+connectionParams.slaveLatency                 = Config::slaveLatency;
+connectionParams.connectionSupervisionTimeout = Config::supervisionTimeout;
+
+ble.updateConnectionParams(params->handle ,&connectionParams);
+
+
+//start timers here
+#if ONLY_BLEMIDI_to_MIDI==0    
+sendBLEMIDI_Ticker.attach( sendBLEMIDI_Callback, SENDBLEMIDI_INTERVAL); // every SENDBLEMIDI_INTERVAL seconds calls sendBLEMIDI_Callback (ISR)   
+
+t.start();  // start the timer used for BLEMIDI timestamps  
+
+#endif 
+
+} 
+
+
+/****************************************************************************************************************************
+BLE-MIDI to MIDI 
+****************************************************************************************************************************/
+
+
+#if ONLY_MIDI_to_BLEMIDI==0 
+
+void parseIncoming(uint8_t *buffer, uint16_t bytesRead) {  // parse BLE-MIDI Events that have been written on the MIDI Characteristic 
+  for (int i = 1; i < bytesRead; i++)
+  {
+    parseMidiEvent(buffer[0], buffer[i]); // parse and send through UART the MIDI Events received through BLE (see BLE_MIDI_Parser.h)
+  }
+}
+                                
+
+
+void onDataWritten(const GattWriteCallbackParams *Handler) // this functions is called within an ISR every time data has been written on nRF51822 GATT Server MIDI Characteristic   
+{
+
+#if LIGHT_SHOW==1
+    redled = !(redled) ;
+#endif
+
+    uint8_t buf[TXRX_BUF_LEN];
+    uint16_t bytesRead;
+    if (Handler->handle == midiCharacteristic.getValueAttribute().getHandle()) {
+        ble.readCharacteristicValue(midiCharacteristic.getValueAttribute().getHandle(),
+                                    buf, &bytesRead);
+        //parseIncoming(buf, bytesRead);
+       
+       for (int i = 0; i < bytesRead; i++){ 
+        UART.putc(buf[i]);
+ 
+        }     
+       
+    }
+
+}
+  
+#endif  
+
+
+/**************************************
+MAIN 
+***************************************/
+
+int main(void)
+{
+
+
+#if LIGHT_SHOW==1
+    redled = 1;
+    greenled = 1;
+#endif
+
+
+
+    UART.baud(31250) ; // set UART baud rate to 31250 (MIDI standard)
+
+    ble.init();
+    ble.onDisconnection(disconnectionCallback);
+    ble.onConnection(connectionCallback) ;
+
+#if ONLY_MIDI_to_BLEMIDI==0
+    ble.onDataWritten(onDataWritten);
+#endif
+    
+    //conn. parameters ( rejected on iOS/OSX  see Apple BLE peripheral design guidelines but can work on Android ) 
+    
+    connectionParams.minConnectionInterval        = Config::minConnectionInterval;
+    connectionParams.maxConnectionInterval        = Config::maxConnectionInterval;
+    connectionParams.slaveLatency                 = Config::slaveLatency;
+    connectionParams.connectionSupervisionTimeout = Config::supervisionTimeout;
+    ble.setPreferredConnectionParams(&connectionParams);
+    ble.getPreferredConnectionParams(&connectionParams);
+    
+    
+    /* setup advertising */
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::BREDR_NOT_SUPPORTED);
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::SHORTENED_LOCAL_NAME,
+                                     (const uint8_t *)"LLFX", sizeof("LLFX") - 1);
+    ble.accumulateAdvertisingPayload(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,
+                                     (const uint8_t *)service_uuid_rev, sizeof(service_uuid_rev));
+
+    ble.accumulateScanResponse(GapAdvertisingData::SHORTENED_LOCAL_NAME,
+                               (const uint8_t *)"LLFX", sizeof("LLFX") - 1);
+    ble.accumulateScanResponse(GapAdvertisingData::COMPLETE_LIST_128BIT_SERVICE_IDS,(const uint8_t *)service_uuid_rev, sizeof(service_uuid_rev));
+    ble.setAdvertisingType(GapAdvertisingParams::ADV_CONNECTABLE_UNDIRECTED);
+
+    /* 100ms; in multiples of 0.625ms. */
+    ble.setAdvertisingInterval(160);
+
+    // set adv_timeout, in seconds
+    ble.setAdvertisingTimeout(0);
+    ble.addService(BLEMIDIService);
+
+    //Set Device Name
+    ble.setDeviceName((const uint8_t *)"LLFX");
+
+    ble.startAdvertising();
+    
+  
+    while(1)   { //main loop
+
+#if ONLY_BLEMIDI_to_MIDI==0    
+            if(sendBLEMIDI_flag == true ) { // check if the flag is set 
+
+            sendBLEMIDI_flag=false ;
+            sendBLEMIDI() ; // parse MIDI Events from UART and send them over BLE
+
+        }
+#endif
+
+        ble.waitForEvent(); // sleep 
+
+    } // end main loop
+
+} // end main

diff -r 000000000000 -r 7de36d52cfef mbed.bld
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.bld	Mon Jun 12 17:12:31 2017 +0000
@@ -0,0 +1,1 @@
+https://mbed.org/users/mbed_official/code/mbed/builds/0f02307a0877
\ No newline at end of file

diff -r 000000000000 -r 7de36d52cfef nRF51822.lib
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/nRF51822.lib	Mon Jun 12 17:12:31 2017 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/teams/Nordic-Semiconductor/code/nRF51822/#c90ae1400bf2