Diff: examples/src/ota_example.cpp

Revision:

44:89b8ed62c32c

Parent:

43:231de26f0302

Child:

45:0d541f98d058

diff -r 231de26f0302 -r 89b8ed62c32c examples/src/ota_example.cpp
--- a/examples/src/ota_example.cpp	Tue Aug 25 02:48:32 2020 +0000
+++ b/examples/src/ota_example.cpp	Wed Nov 11 00:27:58 2020 +0000
@@ -1,7 +1,18 @@
 #include "dot_util.h"
 #include "RadioEvent.h"
+#include "InterruptIn.h"
+#include "Callback.h"
 
-#if ACTIVE_EXAMPLE == OTA_EXAMPLE
+#define CHANNEL_PLAN CP_AS923       // Uncomment for different Freq. plans.
+//#define CHANNEL_PLAN CP_AU915
+static float batMAx = 4.18;         // Change for different battery set up.
+static int uplinkInterval = 15;     // Value of MINUTES between transmissions
+static uint16_t locationID = 001;        // Change for different locations. (1 --> 65535)
+static float rawLatitude = -34.406000;      // Change for different location 
+static float rawLongitude = 150.880429;         // left here as a potential feature
+//// Update if different TTN application is used. ////
+static uint8_t network_id[] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x03, 0x3B, 0xB9 };
+static uint8_t network_key[] = { 0x12, 0x1A, 0x81, 0x8F, 0x10, 0x6B, 0x18, 0x67, 0x54, 0xE6, 0x9E, 0x70, 0x53, 0x7C, 0xAD, 0xCF };
 
 /////////////////////////////////////////////////////////////////////////////
 // -------------------- DOT LIBRARY REQUIRED ------------------------------//
@@ -24,11 +35,9 @@
 /////////////////////////////////////////////////////////////
 static std::string network_name = "MultiTech";
 static std::string network_passphrase = "MultiTech";
-static uint8_t network_id[] = { 0x70, 0xB3, 0xD5, 0x7E, 0xD0, 0x03, 0x3B, 0xB9 };
-static uint8_t network_key[] = { 0x12, 0x1A, 0x81, 0x8F, 0x10, 0x6B, 0x18, 0x67, 0x54, 0xE6, 0x9E, 0x70, 0x53, 0x7C, 0xAD, 0xCF };
 static uint8_t frequency_sub_band = 0;
 static lora::NetworkType network_type = lora::PUBLIC_LORAWAN;
-static uint8_t join_delay = 5000;
+static uint8_t join_delay = 5;
 static uint8_t ack = 0;
 static bool adr = true;
 
@@ -37,31 +46,51 @@
 // in deepsleep mode, IOs float, RAM is lost, and application will start from beginning after waking up
 // if deep_sleep == true, device will enter deepsleep mode
 static bool deep_sleep = false;
+I2C i2c(PC_9, PA_8 ); 
 
 mDot* dot = NULL;
 lora::ChannelPlan* plan = NULL;
 
-Serial pc(USBTX, USBRX);
+BufferedSerial pc(USBTX, USBRX);    
 
-#if defined(TARGET_XDOT_L151CC)
-I2C i2c(I2C_SDA, I2C_SCL);
-ISL29011 lux(i2c);
-#else
-AnalogIn lux(XBEE_AD0);
-#endif
+// Initialize I2C
+const int addr7bit = 0x40;      // 7 bit I2C address
+const int addr8bit = addr7bit << 1; // 8bit I2C address, 0x80
+
+volatile int _count = 0;
 
-int main() {
-    // Custom event handler for automatically displaying RX data
-    RadioEvent events;
-
-    pc.baud(115200);
+void incrementCounter(){
+    _count++;
+    wait_us(200000);    // delay for debouncing
+}
+void voidCounter(){
+    wait_us(200000);    // delay for debouncing
+}
+int readCounter(){
+    return _count;
+}
+void clearCounter(){
+    logInfo("Setting counter to 0");
+    _count = 0;
+}
 
-#if defined(TARGET_XDOT_L151CC)
+int main(){
+    AnalogIn bat(A0);       // Battery % analog input pin
+    DigitalIn tamp(PA_3);
+    
+    InterruptIn in(PA_11); 
+    in.fall(&incrementCounter);     // rise OR fall
+    in.rise(&voidCounter);
+    in.mode(PullUp);
+    __enable_irq();
+    
+    RadioEvent events;
+    
+    pc.set_baud(115200);
     i2c.frequency(400000);
-#endif
-
+    
     mts::MTSLog::setLogLevel(mts::MTSLog::TRACE_LEVEL);
-
+    
 #if CHANNEL_PLAN == CP_AU915
     plan = new lora::ChannelPlan_AU915();
 #elif CHANNEL_PLAN == CP_AS923
@@ -97,12 +126,7 @@
         // To preserve session over power-off or reset enable this flag
         // dot->setPreserveSession(true);
 
-        // in OTA and AUTO_OTA join modes, the credentials can be passed to the library as a name and passphrase or an ID and KEY
-        // only one method or the other should be used!
-        // network ID = crc64(network name)
-        // network KEY = cmac(network passphrase)
-        update_ota_config_name_phrase(network_name, network_passphrase, frequency_sub_band, network_type, ack);
-        //update_ota_config_id_key(network_id, network_key, frequency_sub_band, network_type, ack);
+        update_ota_config_id_key(network_id, network_key, frequency_sub_band, network_type, ack);
 
         // configure network link checks
         // network link checks are a good alternative to requiring the gateway to ACK every packet and should allow a single gateway to handle more Dots
@@ -134,51 +158,114 @@
 
     while (true) {
         uint16_t light;
+        uint16_t rain;
+        uint16_t temp;
+        uint16_t humid;
+        uint32_t lat;
+        uint32_t lon;
+        uint8_t tamper;
+        
+        char cmd[2];        // I2C command address byte 8-bit
+        char my_data[2];    // I2C return address bytes 16-bit
+        
         std::vector<uint8_t> tx_data;
 
-        // join network if not joined
+        //  join network if not joined
         if (!dot->getNetworkJoinStatus()) {
             join_network();
         }
-
-#if defined(TARGET_XDOT_L151CC)
-        // configure the ISL29011 sensor on the xDot-DK for continuous ambient light sampling, 16 bit conversion, and maximum range
-        lux.setMode(ISL29011::ALS_CONT);
-        lux.setResolution(ISL29011::ADC_16BIT);
-        lux.setRange(ISL29011::RNG_64000);
-
-        // get the latest light sample and send it to the gateway
-        light = lux.getData();
-        tx_data.push_back((light >> 8) & 0xFF);
-        tx_data.push_back(light & 0xFF);
-        logInfo("light: %lu [0x%04X]", light, light);
-        send_data(tx_data);
+    
+        // Wake sensor /////////////////////////////////////////////////////////
+        cmd[0] = 0x01;
+        cmd[1] = 0x00;
+        i2c.write(addr8bit, cmd, 2);
+        
+        // Read TEMERATURE
+        cmd[0] = 0xE3;     // For 
+        i2c.write(addr8bit, cmd, 1);
+        i2c.read(addr8bit, my_data, 2);
+        wait_us(20000);       
+        
+        uint16_t amb = (my_data[0] << 8) | my_data[1];
+        float temperature = amb;
+        temperature *= 175.72;
+        temperature /= 65536;
+        temperature -= 46.85;
+        logInfo("Temp = %4.2f*C", temperature);
+        
+        wait_us(6000);
+        
+        // Read HUMIDITY
+        cmd[0] = 0xE5;     // For
+        i2c.write(addr8bit, cmd, 1);
+        i2c.read( addr8bit, my_data, 2);
+        wait_us(20000);       
 
-        // put the LSL29011 ambient light sensor into a low power state
-        lux.setMode(ISL29011::PWR_DOWN);
-#else
-        // get some dummy data and send it to the gateway
-        light = lux.read_u16();
-        tx_data.push_back((light >> 8) & 0xFF);
-        tx_data.push_back(light & 0xFF);
-        logInfo("light: %lu [0x%04X]", light, light);
+        uint16_t hum = (my_data[0] << 8) | my_data[1];
+        float humidity = hum;
+        humidity *= 125;
+        humidity /= 65536;
+        humidity -= 6;
+        if(humidity > 100.00){
+            humidity = 100.00;
+        }
+        logInfo("Humidity = %4.2f%", humidity);
+        
+        // Shutdown temp sensor
+        cmd[0] = 0x00;
+        cmd[1] = 0x00;
+        i2c.write(addr8bit, cmd, 2);
+        ////////////////////////////////////////////////////////////////////////
+        
+        float battery = bat.read();
+        battery = ((3*battery)*2) / batMAx * 100;   // Turn battery V to a %
+        logInfo("Battery = %f", battery);
+        if(battery > 100){
+            battery = 100;
+        }
+                    
+        // Send it to the Cloudtracker
+        rain = readCounter();   // Read the pulse count
+        tx_data.push_back((rain >> 8) & 0xFF);
+        tx_data.push_back(rain & 0xFF);
+        clearCounter();         // Set pulse count back to 0
+        
+        uint16_t battery_send = battery * 10;
+        tx_data.push_back((battery_send >> 8) & 0xFF);
+        tx_data.push_back(battery_send & 0xFF);
+        
+        humid = humidity * 10;  
+        tx_data.push_back((humid >> 8) & 0xFF);
+        tx_data.push_back(humid & 0xFF);
+        
+        temp = temperature * 10;
+        tx_data.push_back((temp >> 8) & 0xFF);
+        tx_data.push_back(temp & 0xFF);
+        
+        tamper = 0;
+        if(tamp == 0){
+            tamper = 1;
+        }
+        tx_data.push_back(tamper & 0xFF);
+        
+        tx_data.push_back((locationID >> 8) & 0xFF);
+        tx_data.push_back(locationID & 0xFF);
+        
+        // lat = (rawLatitude * 10000) + 900000;
+        // tx_data.push_back((lat >> 16) & 0xFF);
+        // tx_data.push_back((lat >> 8) & 0xFF);
+        // tx_data.push_back(lat & 0xFF);
+        
+        // lon = (rawLongitude * 10000) + 1800000;
+        // tx_data.push_back((lon >> 16) & 0xFF);
+        // tx_data.push_back((lon >> 8) & 0xFF);
+        // tx_data.push_back(lon & 0xFF);
+        
         send_data(tx_data);
-#endif
-
-        // if going into deepsleep mode, save the session so we don't need to join again after waking up
-        // not necessary if going into sleep mode since RAM is retained
-        if (deep_sleep) {
-            logInfo("saving network session to NVM");
-            dot->saveNetworkSession();
-        }
-
-        // ONLY ONE of the three functions below should be uncommented depending on the desired wakeup method
-        //sleep_wake_rtc_only(deep_sleep);
-        //sleep_wake_interrupt_only(deep_sleep);
-        sleep_wake_rtc_or_interrupt(deep_sleep);
+        
+        // Send to sleep for desired time. 
+        ThisThread::sleep_for(uplinkInterval * 60s);  // seconds
     }
-
+    
     return 0;
 }
-
-#endif