Diff: Components/lsm303c/lsm303c.c

Revision:

4:a1219ef3537f

Parent:

2:a9f205b30d61

diff -r a9f205b30d61 -r a1219ef3537f Components/lsm303c/lsm303c.c
--- a/Components/lsm303c/lsm303c.c	Thu Nov 12 20:53:23 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,445 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    lsm303c.c
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    24-June-2015
-  * @brief   This file provides a set of functions needed to manage the LSM303C
-  *          MEMS accelerometer.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */
-/* Includes ------------------------------------------------------------------*/
-#include "lsm303c.h"
-
-/** @addtogroup BSP
-  * @{
-  */ 
-
-/** @addtogroup Components
-  * @{
-  */ 
-
-/** @addtogroup LSM303C
-  * @{
-  */
-
-/** @defgroup LSM303C_Private_TypesDefinitions
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup LSM303C_Private_Defines
-  * @{
-  */
-
-/**
-  * @}
-  */
-
-/** @defgroup LSM303C_Private_Macros
-  * @{
-  */
-
-/**
-  * @}
-  */ 
-
-/** @defgroup LSM303C_Private_Functions
-  * @{
-  */
-
-/* ACCELEROMETER functions */
-void    LSM303C_AccInit(uint16_t InitStruct);
-void    LSM303C_AccDeInit(void);
-uint8_t LSM303C_AccReadID(void);
-void    LSM303C_AccLowPower(void);
-void    LSM303C_AccFilterConfig(uint8_t FilterStruct);
-void    LSM303C_AccFilterCmd(uint8_t HighPassFilterState);
-void    LSM303C_AccReadXYZ(int16_t* pData);
-void    LSM303C_AccFilterClickCmd(uint8_t HighPassFilterClickState);
-void    LSM303C_AccIT1Enable(uint8_t LSM303C_IT);
-void    LSM303C_AccIT1Disable(uint8_t LSM303C_IT);
-void    LSM303C_AccIT2Enable(uint8_t LSM303C_IT);
-void    LSM303C_AccIT2Disable(uint8_t LSM303C_IT);
-void    LSM303C_AccClickITEnable(uint8_t ITClick);
-void    LSM303C_AccClickITDisable(uint8_t ITClick);
-void    LSM303C_AccZClickITConfig(void);
-
-/* MAGNETOMETER functions */
-void    LSM303C_MagInit(MAGNETO_InitTypeDef LSM303C_InitStruct);
-void    LSM303C_MagDeInit(void);
-uint8_t LSM303C_MagReadID(void);
-void    LSM303C_MagLowPower(void);
-void    LSM303C_MagReadXYZ(int16_t* pData);
-uint8_t LSM303C_MagGetDataStatus(void);
-
-
-/* COMPASS / ACCELERO IO functions */
-extern void    ACCELERO_IO_Init(void);
-extern void    ACCELERO_IO_ITConfig(void);
-extern void    ACCELERO_IO_Write(uint8_t RegisterAddr, uint8_t Value);
-extern uint8_t ACCELERO_IO_Read(uint8_t RegisterAddr);
-
-/* COMPASS IO function */
-extern void    MAGNETO_IO_Init(void);
-extern void    MAGNETO_IO_ITConfig(void);
-extern void    MAGNETO_IO_Write(uint8_t RegisterAddr, uint8_t Value);
-extern uint8_t MAGNETO_IO_Read(uint8_t RegisterAddr);
-
-/**
-  * @}
-  */ 
-
-
-/** @defgroup LSM303C_Private_Variables
-  * @{
-  */ 
-ACCELERO_DrvTypeDef Lsm303cDrv_accelero =
-{
-  LSM303C_AccInit,
-  LSM303C_AccDeInit,
-  LSM303C_AccReadID,
-  0,
-  LSM303C_AccLowPower,
-  0,
-  0,
-  0,
-  0,
-  0,
-  LSM303C_AccFilterConfig,
-  0,
-  LSM303C_AccReadXYZ
-};
-
-MAGNETO_DrvTypeDef Lsm303cDrv_magneto =
-{
-  LSM303C_MagInit,
-  LSM303C_MagDeInit,
-  LSM303C_MagReadID,
-  0,
-  LSM303C_MagLowPower,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  0,
-  LSM303C_MagReadXYZ
-  
-};
-
-/**
-  * @}
-  */
-
-
-/**
-  * @brief  Set LSM303C Accelerometer Initialization.
-  * @param  InitStruct: Init parameters
-  * @retval None
-  */
-void LSM303C_AccInit(uint16_t InitStruct)
-{  
-  uint8_t ctrl = 0x00;
-  
-  /*  Low level init */
-  ACCELERO_IO_Init();
-  
-  /* Write value to ACC MEMS CTRL_REG1 register */
-  ctrl = (uint8_t) InitStruct;
-  ACCELERO_IO_Write(LSM303C_CTRL_REG1_A, ctrl);
-  
-  /* Write value to ACC MEMS CTRL_REG4 register */
-  ctrl = ((uint8_t) (InitStruct >> 8));
-  ACCELERO_IO_Write(LSM303C_CTRL_REG4_A, ctrl);
-}
-
-/**
-  * @brief  LSM303C Accelerometer De-initialization.
-  * @param  None
-  * @retval None
-  */
-void LSM303C_AccDeInit(void)
-{  
-}
-
-/**
-  * @brief  Read LSM303C ID.
-  * @param  None
-  * @retval ID 
-  */
-uint8_t LSM303C_AccReadID(void)
-{  
-  uint8_t ctrl = 0x00;
-  
-  /* Low level init */
-  ACCELERO_IO_Init();
-  
-  /* Enabled SPI/I2C read communication */
-  ACCELERO_IO_Write(LSM303C_CTRL_REG4_A, 0x5);
-  
-  /* Read value at Who am I register address */
-  ctrl = ACCELERO_IO_Read(LSM303C_WHO_AM_I_ADDR);
-  
-  return ctrl;
-}
-
-/**
-  * @brief  Put Accelerometer in power down mode.
-  * @param  None
-  * @retval None 
-  */
-void LSM303C_AccLowPower(void)
-{  
-  uint8_t ctrl = 0x00;
-  
-  /* Read control register 1 value */
-  ctrl = ACCELERO_IO_Read(LSM303C_CTRL_REG1_A);
-
-  /* Clear ODR bits */
-  ctrl &= ~(LSM303C_ACC_ODR_BITPOSITION);
-
-  /* Set Power down */
-  ctrl |= LSM303C_ACC_ODR_OFF;
-  
-  /* write back control register */
-  ACCELERO_IO_Write(LSM303C_CTRL_REG1_A, ctrl);
-}
-
-/**
-  * @brief  Set High Pass Filter Modality
-  * @param  FilterStruct: contains data for filter config
-  * @retval None
-  */
-void LSM303C_AccFilterConfig(uint8_t FilterStruct) 
-{
-  uint8_t tmpreg;
-  
-//  /* Read CTRL_REG2 register */
-//  tmpreg = ACCELERO_IO_Read(LSM303C_CTRL_REG2_A);
-//  
-//  tmpreg &= 0x0C;
-  tmpreg = FilterStruct;
-  
-  /* Write value to ACC MEMS CTRL_REG2 register */
-  ACCELERO_IO_Write(LSM303C_CTRL_REG2_A, tmpreg);
-}
-
-/**
-  * @brief  Read X, Y & Z Acceleration values 
-  * @param  pData: Data out pointer
-  * @retval None
-  */
-void LSM303C_AccReadXYZ(int16_t* pData)
-{
-  int16_t pnRawData[3];
-  uint8_t ctrlx[2]={0,0};
-  uint8_t buffer[6];
-  uint8_t i = 0;
-  uint8_t sensitivity = LSM303C_ACC_SENSITIVITY_2G;
-  
-  /* Read the acceleration control register content */
-  ctrlx[0] = ACCELERO_IO_Read(LSM303C_CTRL_REG4_A);
-  ctrlx[1] = ACCELERO_IO_Read(LSM303C_CTRL_REG5_A);
-  
-  /* Read output register X, Y & Z acceleration */
-  buffer[0] = ACCELERO_IO_Read(LSM303C_OUT_X_L_A); 
-  buffer[1] = ACCELERO_IO_Read(LSM303C_OUT_X_H_A);
-  buffer[2] = ACCELERO_IO_Read(LSM303C_OUT_Y_L_A);
-  buffer[3] = ACCELERO_IO_Read(LSM303C_OUT_Y_H_A);
-  buffer[4] = ACCELERO_IO_Read(LSM303C_OUT_Z_L_A);
-  buffer[5] = ACCELERO_IO_Read(LSM303C_OUT_Z_H_A);
-  
-  for(i=0; i<3; i++)
-  {
-    pnRawData[i]=((int16_t)((uint16_t)buffer[2*i+1] << 8) + buffer[2*i]);
-  }
-  
-  /* Normal mode */
-  /* Switch the sensitivity value set in the CRTL4 */
-  switch(ctrlx[0] & LSM303C_ACC_FULLSCALE_8G)
-  {
-  case LSM303C_ACC_FULLSCALE_2G:
-    sensitivity = LSM303C_ACC_SENSITIVITY_2G;
-    break;
-  case LSM303C_ACC_FULLSCALE_4G:
-    sensitivity = LSM303C_ACC_SENSITIVITY_4G;
-    break;
-  case LSM303C_ACC_FULLSCALE_8G:
-    sensitivity = LSM303C_ACC_SENSITIVITY_8G;
-    break;
-  }
-  
-  /* Obtain the mg value for the three axis */
-  for(i=0; i<3; i++)
-  {
-    pData[i]=(pnRawData[i] * sensitivity);
-  }
-}
-
-/***********************************************************************************************
-  Magnetometer driver 
-***********************************************************************************************/
-
-/**
-  * @brief  Set LSM303C Magnetometer Initialization.
-  * @param  LSM303C_InitStruct: pointer to a LSM303C_MagInitTypeDef structure 
-  *         that contains the configuration setting for the LSM303C.
-  * @retval None
-  */
-void LSM303C_MagInit(MAGNETO_InitTypeDef LSM303C_InitStruct)
-{  
-  MAGNETO_IO_Write(LSM303C_CTRL_REG1_M, LSM303C_InitStruct.Register1);
-  MAGNETO_IO_Write(LSM303C_CTRL_REG2_M, LSM303C_InitStruct.Register2);
-  MAGNETO_IO_Write(LSM303C_CTRL_REG3_M, LSM303C_InitStruct.Register3);
-  MAGNETO_IO_Write(LSM303C_CTRL_REG4_M, LSM303C_InitStruct.Register4);
-  MAGNETO_IO_Write(LSM303C_CTRL_REG5_M, LSM303C_InitStruct.Register5);
-}
-
-/**
-  * @brief  LSM303C Magnetometer De-initialization.
-  * @param  None
-  * @retval None
-  */
-void LSM303C_MagDeInit(void)
-{  
-}
-
-/**
-  * @brief  Read LSM303C ID.
-  * @param  None
-  * @retval ID 
-  */
-uint8_t LSM303C_MagReadID(void)
-{  
-  /* Low level init */
-  MAGNETO_IO_Init();
-  
-  /* Enabled the SPI/I2C read operation */
-  MAGNETO_IO_Write(LSM303C_CTRL_REG3_M, 0x84);
-  
-  /* Read value at Who am I register address */
-  return MAGNETO_IO_Read(LSM303C_WHO_AM_I_ADDR);
-}
-
-/**
-  * @brief  Put Magnetometer in power down mode.
-  * @param  None
-  * @retval None 
-  */
-void LSM303C_MagLowPower(void)
-{  
-  uint8_t ctrl = 0x00;
-  
-  /* Read control register 1 value */
-  ctrl = MAGNETO_IO_Read(LSM303C_CTRL_REG3_M);
-
-  /* Clear ODR bits */
-  ctrl &= ~(LSM303C_MAG_SELECTION_MODE);
-
-  /* Set Power down */
-  ctrl |= LSM303C_MAG_POWERDOWN2_MODE;
-  
-  /* write back control register */
-  MAGNETO_IO_Write(LSM303C_CTRL_REG3_M, ctrl);
-}
-
-/**
-  * @brief  Get status for Mag LSM303C data
-  * @param  None
-  * @retval Data status in a LSM303C Data register
-  */
-uint8_t LSM303C_MagGetDataStatus(void)
-{
-  /* Read Mag STATUS register */
-  return MAGNETO_IO_Read(LSM303C_STATUS_REG_M);
-}
-
-/**
-  * @brief  Read X, Y & Z Magnetometer values 
-  * @param  pData: Data out pointer
-  * @retval None
-  */
-void LSM303C_MagReadXYZ(int16_t* pData)
-{
-  uint8_t ctrlx;
-  uint8_t buffer[6];
-  uint8_t i=0;
-  
-  /* Read the magnetometer control register content */
-  ctrlx = MAGNETO_IO_Read(LSM303C_CTRL_REG4_M);
-
-  /* Read output register X, Y & Z magnetometer */
-  buffer[0] = MAGNETO_IO_Read(LSM303C_OUT_X_L_M); 
-  buffer[1] = MAGNETO_IO_Read(LSM303C_OUT_X_H_M);
-  buffer[2] = MAGNETO_IO_Read(LSM303C_OUT_Y_L_M);
-  buffer[3] = MAGNETO_IO_Read(LSM303C_OUT_Y_H_M);
-  buffer[4] = MAGNETO_IO_Read(LSM303C_OUT_Z_L_M);
-  buffer[5] = MAGNETO_IO_Read(LSM303C_OUT_Z_H_M);
-  
-  /* Check in the control register4 the data alignment*/
-  if((ctrlx & LSM303C_MAG_BLE_MSB)) 
-  {
-    for(i=0; i<3; i++)
-    {
-      pData[i]=((int16_t)((uint16_t)buffer[2*i] << 8) + buffer[2*i+1]);
-    }
-  }
-  else
-  {
-    for(i=0; i<3; i++)
-    {
-      pData[i]=((int16_t)((uint16_t)buffer[2*i+1] << 8) + buffer[2*i]);
-    }
-  }
-}
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-  
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-  
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/     
-