File content as of revision 0:ad9dfc0179dc:

/**
  ******************************************************************************
  * @file    st7735.h
  * @author  MCD Application Team
  * @version V1.1.1
  * @date    24-November-2014
  * @brief   This file contains all the functions prototypes for the st7735.c
  *          driver.
  ******************************************************************************
  * @attention
  *
  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __ST7735_H
#define __ST7735_H

#ifdef __cplusplus
 extern "C" {
#endif 

/* Includes ------------------------------------------------------------------*/
#include "../Common/lcd.h"

/** @addtogroup BSP
  * @{
  */ 

/** @addtogroup Components
  * @{
  */ 
  
/** @addtogroup ST7735
  * @{
  */

/** @defgroup ST7735_Exported_Types
  * @{
  */
   
/**
  * @}
  */ 

/** @defgroup ST7735_Exported_Constants
  * @{
  */
      
/** 
  * @brief  ST7735 Size  
  */  
#define  ST7735_LCD_PIXEL_WIDTH    ((uint16_t)128)
#define  ST7735_LCD_PIXEL_HEIGHT   ((uint16_t)160)

/** 
  * @brief  ST7735 Registers  
  */ 
#define  LCD_REG_0               0x00 /* No Operation: NOP */
#define  LCD_REG_1               0x01 /* Software reset: SWRESET */
#define  LCD_REG_4               0x04 /* Read Display ID: RDDID */
#define  LCD_REG_9               0x09 /* Read Display Statu: RDDST */
#define  LCD_REG_10              0x0A /* Read Display Power: RDDPM */
#define  LCD_REG_11              0x0B /* Read Display: RDDMADCTL */
#define  LCD_REG_12              0x0C /* Read Display Pixel: RDDCOLMOD */  
#define  LCD_REG_13              0x0D /* Read Display Image: RDDIM */
#define  LCD_REG_14              0x0E /* Read Display Signal: RDDSM */                           
#define  LCD_REG_16              0x10 /* Sleep in & booster off: SLPIN */ 
#define  LCD_REG_17              0x11 /* Sleep out & booster on: SLPOUT */
#define  LCD_REG_18              0x12 /* Partial mode on: PTLON */ 
#define  LCD_REG_19              0x13 /* Partial off (Normal): NORON */
#define  LCD_REG_32              0x20 /* Display inversion off: INVOFF */
#define  LCD_REG_33              0x21 /* Display inversion on: INVON */
#define  LCD_REG_38              0x26 /* Gamma curve select: GAMSET */
#define  LCD_REG_40              0x28 /* Display off: DISPOFF */
#define  LCD_REG_41              0x29 /* Display on: DISPON */
#define  LCD_REG_42              0x2A /* Column address set: CASET */ 
#define  LCD_REG_43              0x2B /* Row address set: RASET */
#define  LCD_REG_44              0x2C /* Memory write: RAMWR */  
#define  LCD_REG_45              0x2D /* LUT for 4k,65k,262k color: RGBSET */
#define  LCD_REG_46              0x2E /* Memory read: RAMRD*/
#define  LCD_REG_48              0x30 /* Partial start/end address set: PTLAR */ 
#define  LCD_REG_52              0x34 /* Tearing effect line off: TEOFF */ 
#define  LCD_REG_53              0x35 /* Tearing effect mode set & on: TEON */ 
#define  LCD_REG_54              0x36 /* Memory data access control: MADCTL */ 
#define  LCD_REG_56              0x38 /* Idle mode off: IDMOFF */ 
#define  LCD_REG_57              0x39 /* Idle mode on: IDMON */ 
#define  LCD_REG_58              0x3A /* Interface pixel format: COLMOD */
#define  LCD_REG_177             0xB1 /* In normal mode (Full colors): FRMCTR1 */
#define  LCD_REG_178             0xB2 /* In Idle mode (8-colors): FRMCTR2 */   
#define  LCD_REG_179             0xB3 /* In partial mode + Full colors: FRMCTR3 */ 
#define  LCD_REG_180             0xB4 /* Display inversion control: INVCTR */
#define  LCD_REG_192             0xC0 /* Power control setting: PWCTR1 */ 
#define  LCD_REG_193             0xC1 /* Power control setting: PWCTR2 */ 
#define  LCD_REG_194             0xC2 /* In normal mode (Full colors): PWCTR3 */
#define  LCD_REG_195             0xC3 /* In Idle mode (8-colors): PWCTR4 */ 
#define  LCD_REG_196             0xC4 /* In partial mode + Full colors: PWCTR5 */ 
#define  LCD_REG_197             0xC5 /* VCOM control 1: VMCTR1 */ 
#define  LCD_REG_199             0xC7 /* Set VCOM offset control: VMOFCTR */ 
#define  LCD_REG_209             0xD1 /* Set LCM version code: WRID2 */ 
#define  LCD_REG_210             0xD2 /* Customer Project code: WRID3 */ 
#define  LCD_REG_217             0xD9 /* NVM control status: NVCTR1 */
#define  LCD_REG_218             0xDA /* Read ID1: RDID1 */ 
#define  LCD_REG_219             0xDB /* Read ID2: RDID2 */ 
#define  LCD_REG_220             0xDC /* Read ID3: RDID3 */ 
#define  LCD_REG_222             0xDE /* NVM Read Command: NVCTR2 */ 
#define  LCD_REG_223             0xDF /* NVM Write Command: NVCTR3 */
#define  LCD_REG_224             0xE0 /* Set Gamma adjustment (+ polarity): GAMCTRP1 */                          
#define  LCD_REG_225             0xE1 /* Set Gamma adjustment (- polarity): GAMCTRN1 */ 

/** 
  * @brief  LCD Lines depending on the chosen fonts.  
  */
#define LCD_LINE_0               LINE(0)
#define LCD_LINE_1               LINE(1)
#define LCD_LINE_2               LINE(2)
#define LCD_LINE_3               LINE(3)
#define LCD_LINE_4               LINE(4)
#define LCD_LINE_5               LINE(5)
#define LCD_LINE_6               LINE(6)
#define LCD_LINE_7               LINE(7)
#define LCD_LINE_8               LINE(8)
#define LCD_LINE_9               LINE(9)
#define LCD_LINE_10              LINE(10)
#define LCD_LINE_11              LINE(11)
#define LCD_LINE_12              LINE(12)
#define LCD_LINE_13              LINE(13)
#define LCD_LINE_14              LINE(14)
#define LCD_LINE_15              LINE(15)
#define LCD_LINE_16              LINE(16)
#define LCD_LINE_17              LINE(17)
#define LCD_LINE_18              LINE(18)
#define LCD_LINE_19              LINE(19) 
   
/**
  * @}
  */

/** @defgroup ADAFRUIT_SPI_LCD_Exported_Functions
  * @{
  */ 
void     st7735_Init(void);
uint16_t st7735_ReadID(void);

void     st7735_DisplayOn(void);
void     st7735_DisplayOff(void);
void     st7735_SetCursor(uint16_t Xpos, uint16_t Ypos);
void     st7735_WritePixel(uint16_t Xpos, uint16_t Ypos, uint16_t RGBCode);
void     st7735_WriteReg(uint8_t LCDReg, uint8_t LCDRegValue);
uint8_t  st7735_ReadReg(uint8_t LCDReg);

void     st7735_SetDisplayWindow(uint16_t Xpos, uint16_t Ypos, uint16_t Width, uint16_t Height);
void     st7735_DrawHLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length);
void     st7735_DrawVLine(uint16_t RGBCode, uint16_t Xpos, uint16_t Ypos, uint16_t Length);

uint16_t st7735_GetLcdPixelWidth(void);
uint16_t st7735_GetLcdPixelHeight(void);
void     st7735_DrawBitmap(uint16_t Xpos, uint16_t Ypos, uint8_t *pbmp);

/* LCD driver structure */
extern LCD_DrvTypeDef   st7735_drv;

/* LCD IO functions */
void     LCD_IO_Init(void);
void     LCD_IO_WriteMultipleData(uint8_t *pData, uint32_t Size);
void     LCD_IO_WriteReg(uint8_t Reg);
void     LCD_Delay(uint32_t delay);
/**
  * @}
  */

#ifdef __cplusplus
}
#endif

#endif /* __ST7735_H */

/**
  * @}
  */ 

/**
  * @}
  */

/**
  * @}
  */ 

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/