SX1261 and sx1262 common library
Dependents: SX126xDevKit SX1262PingPong SX126X_TXonly SX126X_PingPong_Demo ... more
Fork of SX126xLib by
sx126x-hal.h
- Committer:
- GregCr
- Date:
- 2016-09-06
- Revision:
- 1:35d34672a089
- Parent:
- 0:deaafdfde3bb
- Child:
- 2:4ff11ea92fbe
File content as of revision 1:35d34672a089:
/* / _____) _ | | ( (____ _____ ____ _| |_ _____ ____| |__ \____ \| ___ | (_ _) ___ |/ ___) _ \ _____) ) ____| | | || |_| ____( (___| | | | (______/|_____)_|_|_| \__)_____)\____)_| |_| (C)2015 Semtech Description: Handling of the node configuration protocol License: Revised BSD License, see LICENSE.TXT file include in the project Maintainer: Miguel Luis and Gregory Cristian */ #ifndef __SX1261_HAL_H__ #define __SX1261_HAL_H__ #include "sx126x.h" /*! * \brief The default value of SPI clock */ #define SX1261_SPI_FREQ_DEFAULT 1000000 // 16000000 /*! * \brief Actual implementation of a SX1280 radio */ class SX1261Hal : public SX1261 { public: /*! * \brief Constructor for SX1261Hal with SPI support * * Represents the physical connectivity with the radio and set callback functions on radio interrupts */ SX1261Hal( PinName mosi, PinName miso, PinName sclk, PinName nss, PinName busy, PinName dio1, PinName dio2, PinName dio3, PinName rst, void ( *txDone )( ), void ( *rxDone )( ), void ( *rxPblSyncWordHeader )( IrqPblSyncHeaderCode_t val ), void ( *rxTxTimeout )( ),void ( *rxError )( IrqErrorCode_t errorCode ), void ( *rangingDone )( IrqRangingCode_t val ), void ( *cadDone )( bool channelActivityDetected ), void ( *onDioIrq )( ) ); /*! * \brief Constructor for SX1261Hal with UART support * * Represents the physical connectivity with the radio and set callback functions on radio interrupts */ SX1261Hal( PinName tx, PinName rx, PinName busy, PinName dio1, PinName dio2, PinName dio3, PinName rst, void ( *txDone )( ), void ( *rxDone )( ), void ( *rxPblSyncWordHeader )( IrqPblSyncHeaderCode_t val ), void ( *rxTxTimeout )( ), void ( *rxError )( IrqErrorCode_t errorCode ), void ( *rangingDone )( IrqRangingCode_t val ), void ( *cadDone )( bool channelActivityDetected ), void ( *onDioIrq )( ) ); /*! * \brief Destructor for SX1261Hal with UART support * * Take care of the correct destruction of the communication objects */ virtual ~SX1261Hal( ) { if( this->RadioSpi != 0 ) { delete RadioSpi; } if( this->RadioUart != 0 ) { delete RadioUart; } }; /*! * \brief Soft resets the radio */ virtual void Reset( void ); /*! * \brief Clears the instruction ram memory block */ virtual void ClearInstructionRam( void ); /*! * \brief Wakes up the radio */ virtual void Wakeup( void ); /*! * \brief Send a command that write data to the radio * * \param [in] opcode Opcode of the command * \param [in] buffer Buffer to be send to the radio * \param [in] size Size of the buffer to send */ virtual void WriteCommand( RadioCommands_t opcode, uint8_t *buffer, uint16_t size ); /*! * \brief Send a command that read data from the radio * * \param [in] opcode Opcode of the command * \param [out] buffer Buffer holding data from the radio * \param [in] size Size of the buffer */ virtual void ReadCommand( RadioCommands_t opcode, uint8_t *buffer, uint16_t size ); /*! * \brief Write data to the radio memory * * \param [in] address The address of the first byte to write in the radio * \param [in] buffer The data to be written in radio's memory * \param [in] size The number of bytes to write in radio's memory */ virtual void WriteRegister( uint16_t address, uint8_t *buffer, uint16_t size ); virtual void WriteRegisterNoBusy( uint16_t address, uint8_t *buffer, uint16_t size ); /*! * \brief Write a single byte of data to the radio memory * * \param [in] address The address of the first byte to write in the radio * \param [in] value The data to be written in radio's memory */ virtual void WriteRegister( uint16_t address, uint8_t value ); virtual void WriteRegisterNoBusy( uint16_t address, uint8_t value ); /*! * \brief Read data from the radio memory * * \param [in] address The address of the first byte to read from the radio * \param [out] buffer The buffer that holds data read from radio * \param [in] size The number of bytes to read from radio's memory */ virtual void ReadRegister( uint16_t address, uint8_t *buffer, uint16_t size ); virtual void ReadRegisterNoBusy( uint16_t address, uint8_t *buffer, uint16_t size ); /*! * \brief Read a single byte of data from the radio memory * * \param [in] address The address of the first byte to write in the * radio * * \retval value The value of the byte at the given address in * radio's memory */ virtual uint8_t ReadRegister( uint16_t address ); virtual uint8_t ReadRegisterNoBusy( uint16_t address ); /*! * \brief Write data to the buffer holding the payload in the radio * * \param [in] offset The offset to start writing the payload * \param [in] buffer The data to be written (aka payload) * \param [in] size The number of byte to be written */ virtual void WriteBuffer( uint8_t offset, uint8_t *buffer, uint8_t size ); /*! * \brief Read data from the buffer holding the payload in the radio * * \param [in] offset The offset to start reading the payload * \param [out] buffer A pointer to a buffer holding the data from the radio * \param [in] size The number of byte to be read */ virtual void ReadBuffer( uint8_t offset, uint8_t *buffer, uint8_t size ); /*! * \brief Returns the status of DIOs pins * * \retval dioStatus A byte where each bit represents a DIO state: * [ DIO3 | DIO2 | DIO1 | DIO0 ] */ virtual uint8_t GetDioStatus( void ); protected: SPI *RadioSpi; //!< The SPI object used to communicate with the radio Serial *RadioUart; //!< The UART object used to communicate with the radio DigitalOut RadioNss; //!< The pin connected to Radio chip select DigitalOut RadioReset; //!< The reset pin connected to the radio DigitalIn BUSY; //!< The pin connected to DIO0 of the radio (aka busy pin) InterruptIn DIO1; //!< The pin connected to DIO1 InterruptIn DIO2; //!< The pin connected to DIO2 InterruptIn DIO3; //!< The pin connected to DIO3 /*! * \brief Initializes SPI object used to communicate with the radio */ virtual void SpiInit( void ); /*! * \brief Initializes UART object used to communicate with the radio */ virtual void UartInit( void ); /*! * \brief Sets the callback functions to be run on DIO1..3 interrupt * * \param [in] irqHandler A function pointer of the function to be run on every DIO interrupt */ virtual void IoIrqInit( DioIrqHandler irqHandler ); }; #endif // __SX1261_HAL_H__