Semtech / LMiC

IBM LoRa MAC in C (LMiC) mbed library port

Dependents:   lora-temperature LoRaWAN-lmic-app_HS LoRaWAN-lmic-app_huynh

LoRa WAN in C for sx1276 shield

Currently version 1.5

LoRaWAN network configuration for end-device

The following three pieces of information uniquely identifies end-device to network to allow over-the-air activation. These are stored in the end-device prior to join procedure.

AppEUI

Uniquely identifies application provider of end-device.

Least-significant byte first, 8 bytes, use reverse memcpy() to keep same order as shown on lora server.

static const u1_t APPEUI[8]  = { 0x01, 0x00, 0x01, 0x00, 0x00, 0x0C, 0x25, 0x00 };

This is copied into LMIC by os_getArtEui() callback function in application.

DevEUI

End-device ID, unique to each end-node.

Least-significant byte first, 8 bytes, use reverse memcpy() to keep same order as shown on lora server.

static const u1_t DEVEUI[8]  = { 0x00, 0x00, 0x00, 0x00, 0x01, 0x0C, 0x25, 0x00 }; 

This is copied into LMIC by os_getDevEui() callback function in application.

AppKey (aka DevKey)

128-bit (16byte) AES key.

static const u1_t DEVKEY[16] = { 0xe4, 0x72, 0x71, 0xc5, 0xf5, 0x30, 0xa9, 0x9f, 0xcf, 0xc4, 0x0e, 0xab, 0xea, 0xd7, 0x19, 0x42 };

This is copied into LMIC by os_getDevKey() callback function in application.

Using over-the air activation, the end-device (LMIC) performs a join procedure every time it starts for first time, or has lost session context information. When join procedure has successfully completed, the end-device will have a network session key (NwkSKey) and an application session key (AppSKey), which are used for encryption and message integrity check.

US915 configuration with http://us01-iot.semtech.com/

• log in to server
• click on Applications
• find your application and click it
• go to configure motes
• to create a mote, you may enter a new DevEUI
  • you may copy-paste the 16byte application key from an already existing mote, if you desire.