To get started with Seeed Tiny BLE, include detecting motion, button and battery level.
Dependencies: BLE_API eMPL_MPU6050 mbed nRF51822
Diff: nRF51822/nordic-sdk/components/libraries/bootloader_dfu/dfu_ble_svc.h
- Revision:
- 3:24e365bd1b97
- Parent:
- 2:b61ddbb8528e
diff -r b61ddbb8528e -r 24e365bd1b97 nRF51822/nordic-sdk/components/libraries/bootloader_dfu/dfu_ble_svc.h --- a/nRF51822/nordic-sdk/components/libraries/bootloader_dfu/dfu_ble_svc.h Thu Nov 05 02:46:37 2015 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,78 +0,0 @@ -/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved. - * - * The information contained herein is property of Nordic Semiconductor ASA. - * Terms and conditions of usage are described in detail in NORDIC - * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT. - * - * Licensees are granted free, non-transferable use of the information. NO - * WARRANTY of ANY KIND is provided. This heading must NOT be removed from - * the file. - * - */ - -/** @file - * - * @defgroup nrf_dfu_ble_svc DFU BLE SVC - * @{ - * - * @brief DFU BLE SVC in bootloader. The DFU BLE SuperVisor Calls allow an application to execute - * functions in the installed bootloader. - * - * @details This module implements handling of SuperVisor Calls in the bootloader. - * SuperVisor Calls allow for an application to execute calls into the bootloader. - * Currently, it is possible to exchange bonding information (like keys) from the - * application to a bootloader supporting DFU OTA using BLE, so the update process can be - * done through an already existing bond. - * - * @note The application must make sure that all SuperVisor Calls (SVC) are forwarded to the - * bootloader to ensure correct behavior. Forwarding of SVCs to the bootloader is - * done using the SoftDevice SVC \ref sd_softdevice_vector_table_base_set with the value - * present in \c NRF_UICR->BOOTLOADERADDR. - */ - -#ifndef DFU_BLE_SVC_H__ -#define DFU_BLE_SVC_H__ - -#include "nrf_svc.h" -#include <stdint.h> -#include "ble_gap.h" -#include "nrf51.h" -#include "nrf_soc.h" -#include "nrf_error_sdm.h" - -#define BOOTLOADER_SVC_BASE 0x0 /**< The number of the lowest SVC number reserved for the bootloader. */ - -/**@brief The SVC numbers used by the SVC functions in the SoC library. */ -enum BOOTLOADER_SVCS -{ - DFU_BLE_SVC_SET_PEER_DATA = BOOTLOADER_SVC_BASE, - BOOTLOADER_SVC_LAST -}; - -/**@brief DFU Peer data structure. - * - * @details This structure contains peer data needed for connection to a bonded device during DFU. - * The peer data must be provided by the application to the bootloader during buttonless - * update. See @ref dfu_ble_svc_set_peer_data. It contains bond information about the - * desired DFU peer. - */ -typedef struct -{ - ble_gap_enc_info_t enc_info; - ble_gap_irk_t irk; - ble_gap_addr_t addr; -} dfu_ble_peer_data_t; - -/**@brief SVC Function for setting peer data containing address, IRK, and LTK to establish bonded - * connection in DFU mode. - * - * @param[in] p_peer_data Pointer to the peer data containing keys for the connection. - * - * @retval NRF_ERROR_NULL If a NULL pointer was provided as argument. - * @retval NRF_SUCCESS If the function completed successfully. - */ -SVCALL(DFU_BLE_SVC_SET_PEER_DATA, uint32_t, dfu_ble_svc_set_peer_data(dfu_ble_peer_data_t * p_peer_data)); - -#endif // DFU_BLE_SVC_H__ - -/** @} */ \ No newline at end of file