Diff: nRF51822/nordic-sdk/components/libraries/bootloader_dfu/dfu_init.h

Revision:

3:24e365bd1b97

Parent:

2:b61ddbb8528e

--- a/nRF51822/nordic-sdk/components/libraries/bootloader_dfu/dfu_init.h	Thu Nov 05 02:46:37 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,134 +0,0 @@
-/* Copyright (c) 2014 Nordic Semiconductor. All Rights Reserved.
- *
- * The information contained herein is property of Nordic Semiconductor ASA.
- * Terms and conditions of usage are described in detail in NORDIC
- * SEMICONDUCTOR STANDARD SOFTWARE LICENSE AGREEMENT.
- *
- * Licensees are granted free, non-transferable use of the information. NO
- * WARRANTY of ANY KIND is provided. This heading must NOT be removed from
- * the file.
- *
- */
-
-/**@file
- *
- * @defgroup nrf_dfu_init Init packet handling in DFU.
- * @{
- *
- * @brief Device Firmware Update module type and function declaration for init packet handling.
- *
- * @details This header contains basic functionality for performing safety checks on software 
- *          updates for nRF51 based devices. It provides a skeleton for pre-checking an init packet
- *          to ensure the following image is compatible with this device. A safety check should 
- *          always be performed to prevent accidental flashing of unsupported applications or a
- *          wrong combination of application and SoftDevice.
- *          The device information contains information such as:
- *          - Device type (2 bytes), for example Heart Rate. The device type is a number defined by
- *            the customer. It can be located in UICR or FICR.
- *          - Device revision (2 bytes), for example major revision 1, minor revision 0. The device
- *            revision is a number defined by the customer. It can be located in UICR or FICR.
- *          - List of SoftDevices supported by this application, for example 
- *              0x0049 = S110v6_0_0 
- *              0xFFFE = S110 development (any SoftDevice accepted),
- *          - CRC or hash of firmware image
- *
- * @note This module does not support security features such as image signing, but the corresponding
- *       implementation allows for such extensions.
- *       If the init packet is signed by a trusted source, it must be decrypted before it can be 
- *       processed.
- */
-
-#ifndef DFU_INIT_H__
-#define DFU_INIT_H__
-
-#include <stdint.h>
-#include "nrf51.h"
-
-/**@brief Structure contained in an init packet. Contains information on device type, revision, and 
- *        supported SoftDevices.
- */
-typedef struct
-{
-    uint16_t device_type;                                                                   /**< Device type (2 bytes), for example Heart Rate. This number must be defined by the customer before production. It can be located in UICR or FICR. */
-    uint16_t device_rev;                                                                    /**< Device revision (2 bytes), for example major revision 1, minor revision 0. This number must be defined by the customer before production. It can be located in UICR or FICR. */
-    uint32_t app_version;                                                                   /**< Application version for the image software. This field allows for additional checking, for example ensuring that a downgrade is not allowed. */
-    uint16_t softdevice_len;                                                                /**< Number of different SoftDevice revisions compatible with this application. The list of SoftDevice firmware IDs is defined in @ref softdevice. */
-    uint16_t softdevice[1];                                                                 /**< Variable length array of SoftDevices compatible with this application. The length of the array is specified in the length field. SoftDevice firmware id 0xFFFE indicates any SoftDevice. */
-} dfu_init_packet_t;
-
-/**@brief Structure holding basic device information settings.
- */
-typedef struct
-{
-    uint16_t device_type;                                                                   /**< Device type (2 bytes), for example Heart Rate. This number must be defined by the customer before production. It can be located in UICR or FICR. */
-    uint16_t device_rev;                                                                    /**< Device revision (2 bytes), for example major revision 1, minor revision 0. This number must be defined by the customer before production. It can be located in UICR or FICR. */
-} dfu_device_info_t;
-
-/** The device info offset can be modified to place the device info settings at a different location.
-  * If the customer reserved UICR location is used for other application specific data, the offset
-  * must be updated to avoid collision with that data.
-  */
-/** [DFU UICR DEV offset] */
-#define UICR_CUSTOMER_DEVICE_INFO_OFFSET    0x0                                             /**< Device info offset inside the customer UICR reserved area. Customers may change this value to place the device information in a user-preferred location. */
-/** [DFU UICR DEV offset] */
-
-#define UICR_CUSTOMER_RESERVED_OFFSET       0x80                                            /**< Customer reserved area in the UICR. The area from UICR + 0x80 is reserved for customer usage. */
-#define DFU_DEVICE_INFO_BASE                (NRF_UICR_BASE + \
-                                             UICR_CUSTOMER_RESERVED_OFFSET + \
-                                             UICR_CUSTOMER_DEVICE_INFO_OFFSET)              /**< The device information base address inside of UICR. */
-#define DFU_DEVICE_INFO                     ((dfu_device_info_t *)DFU_DEVICE_INFO_BASE)     /**< The memory mapped structure for device information data. */
-
-#define DFU_DEVICE_TYPE_EMPTY               ((uint16_t)0xFFFF)                              /**< Mask indicating no device type is present in UICR. 0xFFFF is default flash pattern when not written with data. */
-#define DFU_DEVICE_REVISION_EMPTY           ((uint16_t)0xFFFF)                              /**< Mask indicating no device revision is present in UICR. 0xFFFF is default flash pattern when not written with data. */
-#define DFU_SOFTDEVICE_ANY                  ((uint16_t)0xFFFE)                              /**< Mask indicating that any SoftDevice is allowed for updating this application. Allows for easy development. Not to be used in production images. */
-
-
-/**@brief DFU prevalidate call for pre-checking the received init packet.
- *
- * @details  Pre-validation will safety check the firmware image to be transfered in second stage.
- *           The function currently checks the device type, device revision, application firmware 
- *           version, and supported SoftDevices. More checks should be added according to 
- *           customer-specific requirements.
- * 
- * @param[in] p_init_data    Pointer to the init packet. If the init packet is encrypted or signed,
- *                           it must first be decrypted before being checked.
- * @param[in] init_data_len  Length of the init data.
- *
- * @retval NRF_SUCCESS              If the pre-validation succeeded, that means the image is 
- *                                  supported by the device and it is considered to come from a 
- *                                  trusted source (signing).
- * @retval NRF_ERROR_INVALID_DATA   If the pre-validation failed, that means the image is not 
- *                                  supported by the device or comes from an un-trusted source 
- *                                  (signing).
- * @retval NRF_ERROR_INVALID_LENGTH If the size of the init packet is not within the limits of 
- *                                  the init packet handler.
- */
-uint32_t dfu_init_prevalidate(uint8_t * p_init_data, uint32_t init_data_len);
-
-/**@brief DFU postvalidate call for post-checking the received image using the init packet.
- *
- * @details  Post-validation can verify the integrity check the firmware image received before 
- *           activating the image.
- *           Checks performed can be: 
- *           - A simple CRC as shown in the corresponding implementation of this API in the file
- *             dfu_init_template.c
- *           - A hash for better verification of the image.
- *           - A signature to ensure the image originates from a trusted source.
- *           Checks are intended to be expanded for customer-specific requirements.
- * 
- * @param[in] p_image    Pointer to the received image. The init data provided in the call 
- *                       \ref dfu_init_prevalidate will be used for validating the image.
- * @param[in] image_len  Length of the image data.
- *
- * @retval NRF_SUCCESS             If the post-validation succeeded, that meant the integrity of the
- *                                 image has been verified and the image originates from a trusted 
- *                                 source (signing).
- * @retval NRF_ERROR_INVALID_DATA  If the post-validation failed, that meant the post check of the 
- *                                 image failed such as the CRC is not matching the image transfered
- *                                 or the verification of the image fails (signing).
- */
-uint32_t dfu_init_postvalidate(uint8_t * p_image, uint32_t image_len);
-
-#endif // DFU_INIT_H__
-
-/**@} */
\ No newline at end of file