Diff: source/TLMFrame.h

Revision:

3:5120491ba317

Parent:

2:9ee673e0b86a

diff -r 9ee673e0b86a -r 5120491ba317 source/TLMFrame.h
--- a/source/TLMFrame.h	Thu Jul 28 23:27:37 2016 +0100
+++ b/source/TLMFrame.h	Fri Jul 29 22:45:40 2016 +0100
@@ -1,158 +1,158 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2015 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef __TLMFRAME_H__
-#define __TLMFRAME_H__
-
-#include "EddystoneTypes.h"
-
-/**
- * Class that encapsulates data that belongs to the Eddystone-TLM frame. For
- * more information refer to https://github.com/google/eddystone/tree/master/eddystone-tlm.
- */
-class TLMFrame
-{
-public:
-    /**
-     * Construct a new instance of this class.
-     *
-     * @param[in] tlmVersionIn
-     *              Eddystone-TLM version number to use.
-     * @param[in] tlmBatteryVoltageIn
-     *              Initial value for the Eddystone-TLM Battery Voltage.
-     * @param[in] tlmBeaconTemperatureIn
-     *              Initial value for the Eddystone-TLM Beacon Temperature.
-     * @param[in] tlmPduCountIn
-     *              Initial value for the Eddystone-TLM Advertising PDU Count.
-     * @param[in] tlmTimeSinceBootIn
-     *              Intitial value for the Eddystone-TLM time since boot timer.
-     8              This timer has a 0.1 second resolution.
-     */
-    TLMFrame(uint8_t  tlmVersionIn           = 0,
-             uint16_t tlmBatteryVoltageIn    = 0,
-             uint16_t tlmBeaconTemperatureIn = 0x8000,
-             uint32_t tlmPduCountIn          = 0,
-             uint32_t tlmTimeSinceBootIn     = 0);
-
-    /**
-     * Set the Eddystone-TLM version number.
-     */
-    void setTLMData(uint8_t tlmVersionIn = 0);
-
-    /**
-     * Construct the raw bytes of the Eddystone-TLM frame that will be directly
-     * used in the advertising packets.
-     *
-     * @param[in] rawFrame
-     *              Pointer to the location where the raw frame will be stored.
-     */
-    void constructTLMFrame(uint8_t *rawFrame);
-
-    /**
-     * Get the size of the Eddystone-TLM frame constructed with the
-     * current state of the TLMFrame object.
-     *
-     * @return The size in bytes of the Eddystone-TLM frame.
-     */
-    size_t getRawFrameSize(void) const;
-
-    /**
-     * Update the time since boot.
-     *
-     * @param[in] nowInMillis
-     *              The time since boot in milliseconds.
-     */
-    void updateTimeSinceBoot(uint32_t nowInMillis);
-
-    /**
-     * Update the Battery Voltage.
-     *
-     * @param[in] tlmBatteryVoltageIn
-     *              The new Battery Voltage value.
-     */
-    void updateBatteryVoltage(uint16_t tlmBatteryVoltageIn);
-
-    /**
-     * Update the Beacon Temperature.
-     *
-     * @param[in] tlmBeaconTemperatureIn
-     *              The new Beacon Temperature value.
-     */
-    void updateBeaconTemperature(uint16_t tlmBeaconTemperatureIn);
-
-    /**
-     * Increment the current PDU counter by 1.
-     */
-    void updatePduCount(void);
-
-    /**
-     * Get the current Battery Voltage.
-     *
-     * @return The Battery Voltage.
-     */
-    uint16_t getBatteryVoltage(void) const;
-
-    /**
-     * Get the current Beacon Temperature.
-     *
-     * @return The Beacon Temperature.
-     */
-    uint16_t getBeaconTemperature(void) const;
-
-    /**
-     * Get the current TLM Version number.
-     *
-     * @return The TLM Version number.
-     */
-    uint8_t getTLMVersion(void) const;
-
-private:
-    /**
-     * The byte ID of an Eddystone-TLM frame.
-     */
-    static const uint8_t FRAME_TYPE_TLM = 0x20;
-    /**
-     * The size of an Eddystone-TLM frame.
-     */
-    static const uint8_t FRAME_SIZE_TLM = 14;
-
-    /**
-     * Eddystone-TLM version value.
-     */
-    uint8_t              tlmVersion;
-    /**
-     * Time since boot in milliseconds.
-     */
-    uint32_t             lastTimeSinceBootRead;
-    /**
-     * Eddystone-TLM Battery Voltage value.
-     */
-    uint16_t             tlmBatteryVoltage;
-    /**
-     * Eddystone-TLM Beacon temperature value.
-     */
-    uint16_t             tlmBeaconTemperature;
-    /**
-     * Eddystone-TLM Advertising PDU Count.
-     */
-    uint32_t             tlmPduCount;
-    /**
-     * Eddystone-TLM time since boot with 0.1 second resolution.
-     */
-    uint32_t             tlmTimeSinceBoot;
-};
-
-#endif  /* __TLMFRAME_H__ */
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef __TLMFRAME_H__
+#define __TLMFRAME_H__
+
+#include "EddystoneTypes.h"
+
+/**
+ * Class that encapsulates data that belongs to the Eddystone-TLM frame. For
+ * more information refer to https://github.com/google/eddystone/tree/master/eddystone-tlm.
+ */
+class TLMFrame
+{
+public:
+    /**
+     * Construct a new instance of this class.
+     *
+     * @param[in] tlmVersionIn
+     *              Eddystone-TLM version number to use.
+     * @param[in] tlmBatteryVoltageIn
+     *              Initial value for the Eddystone-TLM Battery Voltage.
+     * @param[in] tlmBeaconTemperatureIn
+     *              Initial value for the Eddystone-TLM Beacon Temperature.
+     * @param[in] tlmPduCountIn
+     *              Initial value for the Eddystone-TLM Advertising PDU Count.
+     * @param[in] tlmTimeSinceBootIn
+     *              Intitial value for the Eddystone-TLM time since boot timer.
+     8              This timer has a 0.1 second resolution.
+     */
+    TLMFrame(uint8_t  tlmVersionIn           = 0,
+             uint16_t tlmBatteryVoltageIn    = 0,
+             uint16_t tlmBeaconTemperatureIn = 0x8000,
+             uint32_t tlmPduCountIn          = 0,
+             uint32_t tlmTimeSinceBootIn     = 0);
+
+    /**
+     * Set the Eddystone-TLM version number.
+     */
+    void setTLMData(uint8_t tlmVersionIn = 0);
+
+    /**
+     * Construct the raw bytes of the Eddystone-TLM frame that will be directly
+     * used in the advertising packets.
+     *
+     * @param[in] rawFrame
+     *              Pointer to the location where the raw frame will be stored.
+     */
+    void constructTLMFrame(uint8_t *rawFrame);
+
+    /**
+     * Get the size of the Eddystone-TLM frame constructed with the
+     * current state of the TLMFrame object.
+     *
+     * @return The size in bytes of the Eddystone-TLM frame.
+     */
+    size_t getRawFrameSize(void) const;
+
+    /**
+     * Update the time since boot.
+     *
+     * @param[in] nowInMillis
+     *              The time since boot in milliseconds.
+     */
+    void updateTimeSinceBoot(uint32_t nowInMillis);
+
+    /**
+     * Update the Battery Voltage.
+     *
+     * @param[in] tlmBatteryVoltageIn
+     *              The new Battery Voltage value.
+     */
+    void updateBatteryVoltage(uint16_t tlmBatteryVoltageIn);
+
+    /**
+     * Update the Beacon Temperature.
+     *
+     * @param[in] tlmBeaconTemperatureIn
+     *              The new Beacon Temperature value.
+     */
+    void updateBeaconTemperature(uint16_t tlmBeaconTemperatureIn);
+
+    /**
+     * Increment the current PDU counter by 1.
+     */
+    void updatePduCount(void);
+
+    /**
+     * Get the current Battery Voltage.
+     *
+     * @return The Battery Voltage.
+     */
+    uint16_t getBatteryVoltage(void) const;
+
+    /**
+     * Get the current Beacon Temperature.
+     *
+     * @return The Beacon Temperature.
+     */
+    uint16_t getBeaconTemperature(void) const;
+
+    /**
+     * Get the current TLM Version number.
+     *
+     * @return The TLM Version number.
+     */
+    uint8_t getTLMVersion(void) const;
+
+private:
+    /**
+     * The byte ID of an Eddystone-TLM frame.
+     */
+    static const uint8_t FRAME_TYPE_TLM = 0x20;
+    /**
+     * The size of an Eddystone-TLM frame.
+     */
+    static const uint8_t FRAME_SIZE_TLM = 14;
+
+    /**
+     * Eddystone-TLM version value.
+     */
+    uint8_t              tlmVersion;
+    /**
+     * Time since boot in milliseconds.
+     */
+    uint32_t             lastTimeSinceBootRead;
+    /**
+     * Eddystone-TLM Battery Voltage value.
+     */
+    uint16_t             tlmBatteryVoltage;
+    /**
+     * Eddystone-TLM Beacon temperature value.
+     */
+    uint16_t             tlmBeaconTemperature;
+    /**
+     * Eddystone-TLM Advertising PDU Count.
+     */
+    uint32_t             tlmPduCount;
+    /**
+     * Eddystone-TLM time since boot with 0.1 second resolution.
+     */
+    uint32_t             tlmTimeSinceBoot;
+};
+
+#endif  /* __TLMFRAME_H__ */