iNEMO inertial module: 3D accelerometer and 3D gyroscope.
Dependencies: X_NUCLEO_COMMON ST_INTERFACES
Diff: LSM6DSOXSensor.cpp
- Revision:
- 0:f27ce43dee4f
- Child:
- 1:fe40aec6e97a
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/LSM6DSOXSensor.cpp Wed Jul 10 12:08:49 2019 +0000 @@ -0,0 +1,2667 @@ +/** + ****************************************************************************** + * @file LSM6DSOXSensor.cpp + * @author SRA + * @version V1.0.0 + * @date February 2019 + * @brief Implementation of an LSM6DSOX Inertial Measurement Unit (IMU) 6 axes + * sensor. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2019 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + +/* Includes ------------------------------------------------------------------*/ + +#include "LSM6DSOXSensor.h" + + +/* Class Implementation ------------------------------------------------------*/ + +/** Constructor + * @param spi object of an helper class which handles the SPI peripheral + * @param cs_pin the chip select pin + * @param int1_pin the interrupt 1 pin + * @param int2_pin the interrupt 2 pin + * @param spi_type the SPI type + */ +LSM6DSOXSensor::LSM6DSOXSensor(SPI *spi, PinName cs_pin, PinName int1_pin, PinName int2_pin, SPI_type_t spi_type) : _dev_spi(spi), _cs_pin(cs_pin), _int1_irq(int1_pin), _int2_irq(int2_pin), _spi_type(spi_type) +{ + assert (spi); + if (cs_pin == NC) + { + printf ("ERROR LSM6DSOX CS MUST NOT BE NC\n\r"); + _dev_spi = NULL; + _dev_i2c = NULL; + return; + } + + _reg_ctx.write_reg = LSM6DSOX_io_write; + _reg_ctx.read_reg = LSM6DSOX_io_read; + _reg_ctx.handle = (void *)this; + _cs_pin = 1; + _dev_i2c = NULL; + _address = 0; + + if (_spi_type == SPI3W) + { + /* Enable SPI 3-Wires on the component */ + uint8_t data = 0x0C; + lsm6dsox_write_reg(&_reg_ctx, LSM6DSOX_CTRL3_C, &data, 1); + } +} + + +/** Constructor + * @param i2c object of an helper class which handles the I2C peripheral + * @param address the address of the component's instance + * @param int1_pin the interrupt 1 pin + * @param int2_pin the interrupt 2 pin + */ +LSM6DSOXSensor::LSM6DSOXSensor(DevI2C *i2c, uint8_t address, PinName int1_pin, PinName int2_pin) : _dev_i2c(i2c), _address(address), _cs_pin(NC), _int1_irq(int1_pin), _int2_irq(int2_pin) +{ + assert (i2c); + _dev_spi = NULL; + _reg_ctx.write_reg = LSM6DSOX_io_write; + _reg_ctx.read_reg = LSM6DSOX_io_read; + _reg_ctx.handle = (void *)this; +} + +/** + * @brief Initializing the component + * @param init pointer to device specific initalization structure + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::init(void *init) +{ + /* Enable register address automatically incremented during a multiple byte + access with a serial interface. */ + if (lsm6dsox_auto_increment_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable BDU */ + if (lsm6dsox_block_data_update_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* FIFO mode selection */ + if (lsm6dsox_fifo_mode_set(&_reg_ctx, LSM6DSOX_BYPASS_MODE) != 0) + { + return 1; + } + + /* Output data rate selection - power down. */ + if (lsm6dsox_xl_data_rate_set(&_reg_ctx, LSM6DSOX_XL_ODR_OFF) != 0) + { + return 1; + } + + /* Full scale selection. */ + if (lsm6dsox_xl_full_scale_set(&_reg_ctx, LSM6DSOX_2g) != 0) + { + return 1; + } + + /* Output data rate selection - power down. */ + if (lsm6dsox_gy_data_rate_set(&_reg_ctx, LSM6DSOX_GY_ODR_OFF) != 0) + { + return 1; + } + + /* Full scale selection. */ + if (lsm6dsox_gy_full_scale_set(&_reg_ctx, LSM6DSOX_2000dps) != 0) + { + return 1; + } + + /* Select default output data rate. */ + _x_last_odr = LSM6DSOX_XL_ODR_104Hz; + + /* Select default output data rate. */ + _g_last_odr = LSM6DSOX_GY_ODR_104Hz; + + _x_is_enabled = 0; + + _g_is_enabled = 0; + + return 0; +} + +/** + * @brief Read component ID + * @param id the WHO_AM_I value + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::read_id(uint8_t *id) +{ + if (lsm6dsox_device_id_get(&_reg_ctx, id) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable the LSM6DSOX accelerometer sensor + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_x() +{ + /* Check if the component is already enabled */ + if (_x_is_enabled == 1U) + { + return 0; + } + + /* Output data rate selection. */ + if (lsm6dsox_xl_data_rate_set(&_reg_ctx, _x_last_odr) != 0) + { + return 1; + } + + _x_is_enabled = 1; + + return 0; +} + +/** + * @brief Disable the LSM6DSOX accelerometer sensor + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_x() +{ + /* Check if the component is already disabled */ + if (_x_is_enabled == 0U) + { + return 0; + } + + /* Get current output data rate. */ + if (lsm6dsox_xl_data_rate_get(&_reg_ctx, &_x_last_odr) != 0) + { + return 1; + } + + /* Output data rate selection - power down. */ + if (lsm6dsox_xl_data_rate_set(&_reg_ctx, LSM6DSOX_XL_ODR_OFF) != 0) + { + return 1; + } + + _x_is_enabled = 0; + + return 0; +} + +/** + * @brief Get the LSM6DSOX accelerometer sensor sensitivity + * @param sensitivity pointer where the sensitivity is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_sensitivity(float *sensitivity) +{ + int ret = 0; + lsm6dsox_fs_xl_t full_scale; + + /* Read actual full scale selection from sensor. */ + if (lsm6dsox_xl_full_scale_get(&_reg_ctx, &full_scale) != 0) + { + return 1; + } + + /* Store the sensitivity based on actual full scale. */ + switch (full_scale) + { + case LSM6DSOX_2g: + *sensitivity = LSM6DSOX_ACC_SENSITIVITY_FS_2G; + break; + + case LSM6DSOX_4g: + *sensitivity = LSM6DSOX_ACC_SENSITIVITY_FS_4G; + break; + + case LSM6DSOX_8g: + *sensitivity = LSM6DSOX_ACC_SENSITIVITY_FS_8G; + break; + + case LSM6DSOX_16g: + *sensitivity = LSM6DSOX_ACC_SENSITIVITY_FS_16G; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Get the LSM6DSOX accelerometer sensor output data rate + * @param odr pointer where the output data rate is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_odr(float *odr) +{ + int ret = 0; + lsm6dsox_odr_xl_t odr_low_level; + + /* Get current output data rate. */ + if (lsm6dsox_xl_data_rate_get(&_reg_ctx, &odr_low_level) != 0) + { + return 1; + } + + switch (odr_low_level) + { + case LSM6DSOX_XL_ODR_OFF: + *odr = 0.0f; + break; + + case LSM6DSOX_XL_ODR_6Hz5: + *odr = 6.5f; + break; + + case LSM6DSOX_XL_ODR_12Hz5: + *odr = 12.5f; + break; + + case LSM6DSOX_XL_ODR_26Hz: + *odr = 26.0f; + break; + + case LSM6DSOX_XL_ODR_52Hz: + *odr = 52.0f; + break; + + case LSM6DSOX_XL_ODR_104Hz: + *odr = 104.0f; + break; + + case LSM6DSOX_XL_ODR_208Hz: + *odr = 208.0f; + break; + + case LSM6DSOX_XL_ODR_417Hz: + *odr = 417.0f; + break; + + case LSM6DSOX_XL_ODR_833Hz: + *odr = 833.0f; + break; + + case LSM6DSOX_XL_ODR_1667Hz: + *odr = 1667.0f; + break; + + case LSM6DSOX_XL_ODR_3333Hz: + *odr = 3333.0f; + break; + + case LSM6DSOX_XL_ODR_6667Hz: + *odr = 6667.0f; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Set the LSM6DSOX accelerometer sensor output data rate + * @param odr the output data rate value to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_x_odr(float odr) +{ + /* Check if the component is enabled */ + if (_x_is_enabled == 1U) + { + return set_x_odr_when_enabled(odr); + } + else + { + return set_x_odr_when_disabled(odr); + } +} + +/** + * @brief Set the LSM6DSOX accelerometer sensor output data rate when enabled + * @param odr the functional output data rate to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_x_odr_when_enabled(float odr) +{ + lsm6dsox_odr_xl_t new_odr; + + new_odr = (odr <= 12.5f) ? LSM6DSOX_XL_ODR_12Hz5 + : (odr <= 26.0f) ? LSM6DSOX_XL_ODR_26Hz + : (odr <= 52.0f) ? LSM6DSOX_XL_ODR_52Hz + : (odr <= 104.0f) ? LSM6DSOX_XL_ODR_104Hz + : (odr <= 208.0f) ? LSM6DSOX_XL_ODR_208Hz + : (odr <= 417.0f) ? LSM6DSOX_XL_ODR_417Hz + : (odr <= 833.0f) ? LSM6DSOX_XL_ODR_833Hz + : (odr <= 1667.0f) ? LSM6DSOX_XL_ODR_1667Hz + : (odr <= 3333.0f) ? LSM6DSOX_XL_ODR_3333Hz + : LSM6DSOX_XL_ODR_6667Hz; + + /* Output data rate selection. */ + if (lsm6dsox_xl_data_rate_set(&_reg_ctx, new_odr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the LSM6DSOX accelerometer sensor output data rate when disabled + * @param odr the functional output data rate to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_x_odr_when_disabled(float odr) +{ + _x_last_odr = (odr <= 12.5f) ? LSM6DSOX_XL_ODR_12Hz5 + : (odr <= 26.0f) ? LSM6DSOX_XL_ODR_26Hz + : (odr <= 52.0f) ? LSM6DSOX_XL_ODR_52Hz + : (odr <= 104.0f) ? LSM6DSOX_XL_ODR_104Hz + : (odr <= 208.0f) ? LSM6DSOX_XL_ODR_208Hz + : (odr <= 417.0f) ? LSM6DSOX_XL_ODR_417Hz + : (odr <= 833.0f) ? LSM6DSOX_XL_ODR_833Hz + : (odr <= 1667.0f) ? LSM6DSOX_XL_ODR_1667Hz + : (odr <= 3333.0f) ? LSM6DSOX_XL_ODR_3333Hz + : LSM6DSOX_XL_ODR_6667Hz; + + return 0; +} + + +/** + * @brief Get the LSM6DSOX accelerometer sensor full scale + * @param full_scale pointer where the full scale is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_fs(float *full_scale) +{ + int ret = 0; + lsm6dsox_fs_xl_t fs_low_level; + + /* Read actual full scale selection from sensor. */ + if (lsm6dsox_xl_full_scale_get(&_reg_ctx, &fs_low_level) != 0) + { + return 1; + } + + switch (fs_low_level) + { + case LSM6DSOX_2g: + *full_scale = 2.0f; + break; + + case LSM6DSOX_4g: + *full_scale = 4.0f; + break; + + case LSM6DSOX_8g: + *full_scale = 8.0f; + break; + + case LSM6DSOX_16g: + *full_scale = 16.0f; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Set the LSM6DSOX accelerometer sensor full scale + * @param full_scale the functional full scale to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_x_fs(float full_scale) +{ + lsm6dsox_fs_xl_t new_fs; + + /* Seems like MISRA C-2012 rule 14.3a violation but only from single file statical analysis point of view because + the parameter passed to the function is not known at the moment of analysis */ + new_fs = (full_scale <= 2.0f) ? LSM6DSOX_2g + : (full_scale <= 4.0f) ? LSM6DSOX_4g + : (full_scale <= 8.0f) ? LSM6DSOX_8g + : LSM6DSOX_16g; + + if (lsm6dsox_xl_full_scale_set(&_reg_ctx, new_fs) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX accelerometer sensor raw axes + * @param value pointer where the raw values of the axes are written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_axes_raw(int16_t *value) +{ + axis3bit16_t data_raw; + + /* Read raw data values. */ + if (lsm6dsox_acceleration_raw_get(&_reg_ctx, data_raw.u8bit) != 0) + { + return 1; + } + + /* Format the data. */ + value[0] = data_raw.i16bit[0]; + value[1] = data_raw.i16bit[1]; + value[2] = data_raw.i16bit[2]; + + return 0; +} + + +/** + * @brief Get the LSM6DSOX accelerometer sensor axes + * @param acceleration pointer where the values of the axes are written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_axes(int32_t *acceleration) +{ + axis3bit16_t data_raw; + float sensitivity = 0.0f; + + /* Read raw data values. */ + if (lsm6dsox_acceleration_raw_get(&_reg_ctx, data_raw.u8bit) != 0) + { + return 1; + } + + /* Get LSM6DSOX actual sensitivity. */ + if (get_x_sensitivity(&sensitivity) != 0) + { + return 1; + } + + /* Calculate the data. */ + acceleration[0] = (int32_t)((float)((float)data_raw.i16bit[0] * sensitivity)); + acceleration[1] = (int32_t)((float)((float)data_raw.i16bit[1] * sensitivity)); + acceleration[2] = (int32_t)((float)((float)data_raw.i16bit[2] * sensitivity)); + + return 0; +} + + +/** + * @brief Enable the LSM6DSOX gyroscope sensor + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_g() +{ + /* Check if the component is already enabled */ + if (_g_is_enabled == 1U) + { + return 0; + } + + /* Output data rate selection. */ + if (lsm6dsox_gy_data_rate_set(&_reg_ctx, _g_last_odr) != 0) + { + return 1; + } + + _g_is_enabled = 1; + + return 0; +} + + +/** + * @brief Disable the LSM6DSOX gyroscope sensor + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_g() +{ + /* Check if the component is already disabled */ + if (_g_is_enabled == 0U) + { + return 0; + } + + /* Get current output data rate. */ + if (lsm6dsox_gy_data_rate_get(&_reg_ctx, &_g_last_odr) != 0) + { + return 1; + } + + /* Output data rate selection - power down. */ + if (lsm6dsox_gy_data_rate_set(&_reg_ctx, LSM6DSOX_GY_ODR_OFF) != 0) + { + return 1; + } + + _g_is_enabled = 0; + + return 0; +} + +/** + * @brief Get the LSM6DSOX gyroscope sensor sensitivity + * @param sensitivity pointer where the sensitivity is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_sensitivity(float *sensitivity) +{ + int ret = 0; + lsm6dsox_fs_g_t full_scale; + + /* Read actual full scale selection from sensor. */ + if (lsm6dsox_gy_full_scale_get(&_reg_ctx, &full_scale) != 0) + { + return 1; + } + + /* Store the sensitivity based on actual full scale. */ + switch (full_scale) + { + case LSM6DSOX_125dps: + *sensitivity = LSM6DSOX_GYRO_SENSITIVITY_FS_125DPS; + break; + + case LSM6DSOX_250dps: + *sensitivity = LSM6DSOX_GYRO_SENSITIVITY_FS_250DPS; + break; + + case LSM6DSOX_500dps: + *sensitivity = LSM6DSOX_GYRO_SENSITIVITY_FS_500DPS; + break; + + case LSM6DSOX_1000dps: + *sensitivity = LSM6DSOX_GYRO_SENSITIVITY_FS_1000DPS; + break; + + case LSM6DSOX_2000dps: + *sensitivity = LSM6DSOX_GYRO_SENSITIVITY_FS_2000DPS; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Get the LSM6DSOX gyroscope sensor output data rate + * @param odr pointer where the output data rate is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_odr(float *odr) +{ + int ret = 0; + lsm6dsox_odr_g_t odr_low_level; + + /* Get current output data rate. */ + if (lsm6dsox_gy_data_rate_get(&_reg_ctx, &odr_low_level) != 0) + { + return 1; + } + + switch (odr_low_level) + { + case LSM6DSOX_GY_ODR_OFF: + *odr = 0.0f; + break; + + case LSM6DSOX_GY_ODR_12Hz5: + *odr = 12.5f; + break; + + case LSM6DSOX_GY_ODR_26Hz: + *odr = 26.0f; + break; + + case LSM6DSOX_GY_ODR_52Hz: + *odr = 52.0f; + break; + + case LSM6DSOX_GY_ODR_104Hz: + *odr = 104.0f; + break; + + case LSM6DSOX_GY_ODR_208Hz: + *odr = 208.0f; + break; + + case LSM6DSOX_GY_ODR_417Hz: + *odr = 417.0f; + break; + + case LSM6DSOX_GY_ODR_833Hz: + *odr = 833.0f; + break; + + case LSM6DSOX_GY_ODR_1667Hz: + *odr = 1667.0f; + break; + + case LSM6DSOX_GY_ODR_3333Hz: + *odr = 3333.0f; + break; + + case LSM6DSOX_GY_ODR_6667Hz: + *odr = 6667.0f; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Set the LSM6DSOX gyroscope sensor output data rate + * @param odr the output data rate value to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_g_odr(float odr) +{ + /* Check if the component is enabled */ + if (_g_is_enabled == 1U) + { + return set_g_odr_when_enabled(odr); + } + else + { + return set_g_odr_when_disabled(odr); + } +} + +/** + * @brief Set the LSM6DSOX gyroscope sensor output data rate when enabled + * @param odr the functional output data rate to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_g_odr_when_enabled(float odr) +{ + lsm6dsox_odr_g_t new_odr; + + new_odr = (odr <= 12.5f) ? LSM6DSOX_GY_ODR_12Hz5 + : (odr <= 26.0f) ? LSM6DSOX_GY_ODR_26Hz + : (odr <= 52.0f) ? LSM6DSOX_GY_ODR_52Hz + : (odr <= 104.0f) ? LSM6DSOX_GY_ODR_104Hz + : (odr <= 208.0f) ? LSM6DSOX_GY_ODR_208Hz + : (odr <= 417.0f) ? LSM6DSOX_GY_ODR_417Hz + : (odr <= 833.0f) ? LSM6DSOX_GY_ODR_833Hz + : (odr <= 1667.0f) ? LSM6DSOX_GY_ODR_1667Hz + : (odr <= 3333.0f) ? LSM6DSOX_GY_ODR_3333Hz + : LSM6DSOX_GY_ODR_6667Hz; + + /* Output data rate selection. */ + if (lsm6dsox_gy_data_rate_set(&_reg_ctx, new_odr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the LSM6DSOX gyroscope sensor output data rate when disabled + * @param odr the functional output data rate to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_g_odr_when_disabled(float odr) +{ + _g_last_odr = (odr <= 12.5f) ? LSM6DSOX_GY_ODR_12Hz5 + : (odr <= 26.0f) ? LSM6DSOX_GY_ODR_26Hz + : (odr <= 52.0f) ? LSM6DSOX_GY_ODR_52Hz + : (odr <= 104.0f) ? LSM6DSOX_GY_ODR_104Hz + : (odr <= 208.0f) ? LSM6DSOX_GY_ODR_208Hz + : (odr <= 417.0f) ? LSM6DSOX_GY_ODR_417Hz + : (odr <= 833.0f) ? LSM6DSOX_GY_ODR_833Hz + : (odr <= 1667.0f) ? LSM6DSOX_GY_ODR_1667Hz + : (odr <= 3333.0f) ? LSM6DSOX_GY_ODR_3333Hz + : LSM6DSOX_GY_ODR_6667Hz; + + return 0; +} + + +/** + * @brief Get the LSM6DSOX gyroscope sensor full scale + * @param full_scale pointer where the full scale is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_fs(float *full_scale) +{ + int ret = 0; + lsm6dsox_fs_g_t fs_low_level; + + /* Read actual full scale selection from sensor. */ + if (lsm6dsox_gy_full_scale_get(&_reg_ctx, &fs_low_level) != 0) + { + return 1; + } + + switch (fs_low_level) + { + case LSM6DSOX_125dps: + *full_scale = 125.0f; + break; + + case LSM6DSOX_250dps: + *full_scale = 250.0f; + break; + + case LSM6DSOX_500dps: + *full_scale = 500.0f; + break; + + case LSM6DSOX_1000dps: + *full_scale = 1000.0f; + break; + + case LSM6DSOX_2000dps: + *full_scale = 2000.0f; + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Set the LSM6DSOX gyroscope sensor full scale + * @param full_scale the functional full scale to be set + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_g_fs(float full_scale) +{ + lsm6dsox_fs_g_t new_fs; + + new_fs = (full_scale <= 125.0f) ? LSM6DSOX_125dps + : (full_scale <= 250.0f) ? LSM6DSOX_250dps + : (full_scale <= 500.0f) ? LSM6DSOX_500dps + : (full_scale <= 1000.0f) ? LSM6DSOX_1000dps + : LSM6DSOX_2000dps; + + if (lsm6dsox_gy_full_scale_set(&_reg_ctx, new_fs) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX gyroscope sensor raw axes + * @param value pointer where the raw values of the axes are written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_axes_raw(int16_t *value) +{ + axis3bit16_t data_raw; + + /* Read raw data values. */ + if (lsm6dsox_angular_rate_raw_get(&_reg_ctx, data_raw.u8bit) != 0) + { + return 1; + } + + /* Format the data. */ + value[0] = data_raw.i16bit[0]; + value[1] = data_raw.i16bit[1]; + value[2] = data_raw.i16bit[2]; + + return 0; +} + + +/** + * @brief Get the LSM6DSOX gyroscope sensor axes + * @param angular_rate pointer where the values of the axes are written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_axes(int32_t *angular_rate) +{ + axis3bit16_t data_raw; + float sensitivity; + + /* Read raw data values. */ + if (lsm6dsox_angular_rate_raw_get(&_reg_ctx, data_raw.u8bit) != 0) + { + return 1; + } + + /* Get LSM6DSOX actual sensitivity. */ + if (get_g_sensitivity(&sensitivity) != 0) + { + return 1; + } + + /* Calculate the data. */ + angular_rate[0] = (int32_t)((float)((float)data_raw.i16bit[0] * sensitivity)); + angular_rate[1] = (int32_t)((float)((float)data_raw.i16bit[1] * sensitivity)); + angular_rate[2] = (int32_t)((float)((float)data_raw.i16bit[2] * sensitivity)); + + return 0; +} + + +/** + * @brief Get the LSM6DSOX register value + * @param reg address to be read + * @param data pointer where the value is written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::read_reg(uint8_t reg, uint8_t *data) +{ + if (lsm6dsox_read_reg(&_reg_ctx, reg, data, 1) != 0) + { + return 1; + } + + return 0; +} + + +/** + * @brief Set the LSM6DSOX register value + * @param reg address to be written + * @param data value to be written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::write_reg(uint8_t reg, uint8_t data) +{ + if (lsm6dsox_write_reg(&_reg_ctx, reg, &data, 1) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the interrupt latch + * @param status value to be written + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_interrupt_latch(uint8_t status) +{ + if (status > 1U) + { + return 1; + } + + if (lsm6dsox_int_notification_set(&_reg_ctx, (lsm6dsox_lir_t)status) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable free fall detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_free_fall_detection(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(416.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* FF_DUR setting */ + if (lsm6dsox_ff_dur_set(&_reg_ctx, 0x06) != 0) + { + return 1; + } + + /* WAKE_DUR setting */ + if (lsm6dsox_wkup_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* SLEEP_DUR setting */ + if (lsm6dsox_act_sleep_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* FF_THS setting */ + if (lsm6dsox_ff_threshold_set(&_reg_ctx, LSM6DSOX_FF_TSH_312mg) != 0) + { + return 1; + } + + /* Enable free fall event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_ff = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_ff = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Disable free fall detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_free_fall_detection() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable free fall event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_ff = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_ff = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* FF_DUR setting */ + if (lsm6dsox_ff_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* FF_THS setting */ + if (lsm6dsox_ff_threshold_set(&_reg_ctx, LSM6DSOX_FF_TSH_156mg) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set free fall threshold + * @param thr free fall detection threshold + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_free_fall_threshold(uint8_t thr) +{ + if (lsm6dsox_ff_threshold_set(&_reg_ctx, (lsm6dsox_ff_ths_t)thr) != 0) + { + return 1; + } + + return 0; +} + + +/** + * @brief Set free fall duration + * @param dur free fall detection duration + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_free_fall_duration(uint8_t dur) +{ + if (lsm6dsox_ff_dur_set(&_reg_ctx, dur) != 0) + { + return 1; + } + + return 0; +} + + +/** + * @brief Enable pedometer + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_pedometer() +{ + lsm6dsox_pin_int1_route_t val; + + /* Output Data Rate selection */ + if (set_x_odr(26.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* Enable pedometer algorithm. */ + if (lsm6dsox_pedo_sens_set(&_reg_ctx, LSM6DSOX_PEDO_BASE_MODE) != 0) + { + return 1; + } + + /* Enable step detector on INT1 pin */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val) != 0) + { + return 1; + } + + val.emb_func_int1.int1_step_detector = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Disable pedometer + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_pedometer() +{ + lsm6dsox_pin_int1_route_t val1; + + /* Disable step detector on INT1 pin */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.emb_func_int1.int1_step_detector = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + /* Disable pedometer algorithm. */ + if (lsm6dsox_pedo_sens_set(&_reg_ctx, LSM6DSOX_PEDO_DISABLE) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get step count + * @param step_count step counter + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_step_counter(uint16_t *step_count) +{ + if (lsm6dsox_number_of_steps_get(&_reg_ctx, (uint8_t *)step_count) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable step counter reset + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::reset_step_counter() +{ + if (lsm6dsox_steps_reset(&_reg_ctx) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable tilt detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_tilt_detection(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(26.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* Enable tilt calculation. */ + if (lsm6dsox_tilt_sens_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable tilt event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.emb_func_int1.int1_tilt = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.emb_func_int2.int2_tilt = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Disable tilt detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_tilt_detection() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable tilt event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.emb_func_int1.int1_tilt = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.emb_func_int2.int2_tilt = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* Disable tilt calculation. */ + if (lsm6dsox_tilt_sens_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable wake up detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_wake_up_detection(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(416.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* WAKE_DUR setting */ + if (lsm6dsox_wkup_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Set wake up threshold. */ + if (lsm6dsox_wkup_threshold_set(&_reg_ctx, 0x02) != 0) + { + return 1; + } + + /* Enable wake up event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_wu = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_wu = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + + +/** + * @brief Disable wake up detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_wake_up_detection() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable wake up event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_wu = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_wu = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* Reset wake up threshold. */ + if (lsm6dsox_wkup_threshold_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* WAKE_DUR setting */ + if (lsm6dsox_wkup_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set wake up threshold + * @param thr wake up detection threshold + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_wake_up_threshold(uint8_t thr) +{ + /* Set wake up threshold. */ + if (lsm6dsox_wkup_threshold_set(&_reg_ctx, thr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set wake up duration + * @param dur wake up detection duration + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_wake_up_duration(uint8_t dur) +{ + /* Set wake up duration. */ + if (lsm6dsox_wkup_dur_set(&_reg_ctx, dur) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable single tap detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_single_tap_detection(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(416.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* Enable X direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_x_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable Y direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_y_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable Z direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_z_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Set tap threshold. */ + if (lsm6dsox_tap_threshold_x_set(&_reg_ctx, 0x08) != 0) + { + return 1; + } + + /* Set tap shock time window. */ + if (lsm6dsox_tap_shock_set(&_reg_ctx, 0x02) != 0) + { + return 1; + } + + /* Set tap quiet time window. */ + if (lsm6dsox_tap_quiet_set(&_reg_ctx, 0x01) != 0) + { + return 1; + } + + /* _NOTE_: Tap duration time window - don't care for single tap. */ + + /* _NOTE_: Single/Double Tap event - don't care of this flag for single tap. */ + + /* Enable single tap event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_single_tap = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_single_tap = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Disable single tap detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_single_tap_detection() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable single tap event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_single_tap = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_single_tap = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* Reset tap quiet time window. */ + if (lsm6dsox_tap_quiet_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Reset tap shock time window. */ + if (lsm6dsox_tap_shock_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Reset tap threshold. */ + if (lsm6dsox_tap_threshold_x_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Disable Z direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_z_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + /* Disable Y direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_y_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + /* Disable X direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_x_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable double tap detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_double_tap_detection(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(416.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* Enable X direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_x_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable Y direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_y_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Enable Z direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_z_set(&_reg_ctx, PROPERTY_ENABLE) != 0) + { + return 1; + } + + /* Set tap threshold. */ + if (lsm6dsox_tap_threshold_x_set(&_reg_ctx, 0x08) != 0) + { + return 1; + } + + /* Set tap shock time window. */ + if (lsm6dsox_tap_shock_set(&_reg_ctx, 0x03) != 0) + { + return 1; + } + + /* Set tap quiet time window. */ + if (lsm6dsox_tap_quiet_set(&_reg_ctx, 0x03) != 0) + { + return 1; + } + + /* Set tap duration time window. */ + if (lsm6dsox_tap_dur_set(&_reg_ctx, 0x08) != 0) + { + return 1; + } + + /* Single and double tap enabled. */ + if (lsm6dsox_tap_mode_set(&_reg_ctx, LSM6DSOX_BOTH_SINGLE_DOUBLE) != 0) + { + return 1; + } + + /* Enable double tap event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_double_tap = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_double_tap = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Disable double tap detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_double_tap_detection() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable double tap event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_double_tap = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_double_tap = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* Only single tap enabled. */ + if (lsm6dsox_tap_mode_set(&_reg_ctx, LSM6DSOX_ONLY_SINGLE) != 0) + { + return 1; + } + + /* Reset tap duration time window. */ + if (lsm6dsox_tap_dur_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Reset tap quiet time window. */ + if (lsm6dsox_tap_quiet_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Reset tap shock time window. */ + if (lsm6dsox_tap_shock_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Reset tap threshold. */ + if (lsm6dsox_tap_threshold_x_set(&_reg_ctx, 0x00) != 0) + { + return 1; + } + + /* Disable Z direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_z_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + /* Disable Y direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_y_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + /* Disable X direction in tap recognition. */ + if (lsm6dsox_tap_detection_on_x_set(&_reg_ctx, PROPERTY_DISABLE) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set tap threshold + * @param thr tap threshold + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_tap_threshold(uint8_t thr) +{ + /* Set tap threshold. */ + if (lsm6dsox_tap_threshold_x_set(&_reg_ctx, thr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set tap shock time + * @param time tap shock time + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_tap_shock_time(uint8_t time) +{ + /* Set tap shock time window. */ + if (lsm6dsox_tap_shock_set(&_reg_ctx, time) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set tap quiet time + * @param time tap quiet time + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_tap_quiet_time(uint8_t time) +{ + /* Set tap quiet time window. */ + if (lsm6dsox_tap_quiet_set(&_reg_ctx, time) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set tap duration time + * @param time tap duration time + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_tap_duration_time(uint8_t time) +{ + /* Set tap duration time window. */ + if (lsm6dsox_tap_dur_set(&_reg_ctx, time) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Enable 6D orientation detection + * @param int_pin interrupt pin line to be used + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::enable_6d_orientation(LSM6DSOX_Interrupt_Pin_t int_pin) +{ + int ret = 0; + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Output Data Rate selection */ + if (set_x_odr(416.0f) != 0) + { + return 1; + } + + /* Full scale selection */ + if (set_x_fs(2.0f) != 0) + { + return 1; + } + + /* 6D orientation enabled. */ + if (lsm6dsox_6d_threshold_set(&_reg_ctx, LSM6DSOX_DEG_60) != 0) + { + return 1; + } + + /* Enable 6D orientation event on either INT1 or INT2 pin */ + switch (int_pin) + { + case LSM6DSOX_INT1_PIN: + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_6d = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + break; + + case LSM6DSOX_INT2_PIN: + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_6d = PROPERTY_ENABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + break; + + default: + ret = 1; + break; + } + + return ret; +} + +/** + * @brief Disable 6D orientation detection + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::disable_6d_orientation() +{ + lsm6dsox_pin_int1_route_t val1; + lsm6dsox_pin_int2_route_t val2; + + /* Disable 6D orientation event on both INT1 and INT2 pins */ + if (lsm6dsox_pin_int1_route_get(&_reg_ctx, &val1) != 0) + { + return 1; + } + + val1.md1_cfg.int1_6d = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int1_route_set(&_reg_ctx, &val1) != 0) + { + return 1; + } + + if (lsm6dsox_pin_int2_route_get(&_reg_ctx, &val2) != 0) + { + return 1; + } + + val2.md2_cfg.int2_6d = PROPERTY_DISABLE; + + if (lsm6dsox_pin_int2_route_set(&_reg_ctx, &val2) != 0) + { + return 1; + } + + /* Reset 6D orientation. */ + if (lsm6dsox_6d_threshold_set(&_reg_ctx, LSM6DSOX_DEG_80) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set 6D orientation threshold + * @param thr 6D Orientation detection threshold + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_6d_orientation_threshold(uint8_t thr) +{ + if (lsm6dsox_6d_threshold_set(&_reg_ctx, (lsm6dsox_sixd_ths_t)thr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the status of XLow orientation + * @param xl the status of XLow orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_xl(uint8_t *xl) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *xl = data.xl; + + return 0; +} + +/** + * @brief Get the status of XHigh orientation + * @param xh the status of XHigh orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_xh(uint8_t *xh) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *xh = data.xh; + + return 0; +} + +/** + * @brief Get the status of YLow orientation + * @param yl the status of YLow orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_yl(uint8_t *yl) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *yl = data.yl; + + return 0; +} + +/** + * @brief Get the status of YHigh orientation + * @param yh the status of YHigh orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_yh(uint8_t *yh) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *yh = data.yh; + + return 0; +} + +/** + * @brief Get the status of ZLow orientation + * @param zl the status of ZLow orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_zl(uint8_t *zl) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *zl = data.zl; + + return 0; +} + +/** + * @brief Get the status of ZHigh orientation + * @param zh the status of ZHigh orientation + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_6d_orientation_zh(uint8_t *zh) +{ + lsm6dsox_d6d_src_t data; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&data, 1) != 0) + { + return 1; + } + + *zh = data.zh; + + return 0; +} + +/** + * @brief Get the LSM6DSOX ACC data ready bit value + * @param status the status of data ready bit + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_x_drdy_status(uint8_t *status) +{ + if (lsm6dsox_xl_flag_data_ready_get(&_reg_ctx, status) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the status of all hardware events + * @param status the status of all hardware events + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_event_status(LSM6DSOX_Event_Status_t *status) +{ + uint8_t tilt_ia = 0U; + lsm6dsox_wake_up_src_t wake_up_src; + lsm6dsox_tap_src_t tap_src; + lsm6dsox_d6d_src_t d6d_src; + lsm6dsox_emb_func_src_t func_src; + lsm6dsox_md1_cfg_t md1_cfg; + lsm6dsox_md2_cfg_t md2_cfg; + lsm6dsox_emb_func_int1_t int1_ctrl; + lsm6dsox_emb_func_int2_t int2_ctrl; + + (void)memset((void *)status, 0x0, sizeof(LSM6DSOX_Event_Status_t)); + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_WAKE_UP_SRC, (uint8_t *)&wake_up_src, 1) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_TAP_SRC, (uint8_t *)&tap_src, 1) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_D6D_SRC, (uint8_t *)&d6d_src, 1) != 0) + { + return 1; + } + + if (lsm6dsox_mem_bank_set(&_reg_ctx, LSM6DSOX_EMBEDDED_FUNC_BANK) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_EMB_FUNC_SRC, (uint8_t *)&func_src, 1) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_EMB_FUNC_INT1, (uint8_t *)&int1_ctrl, 1) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_EMB_FUNC_INT2, (uint8_t *)&int2_ctrl, 1) != 0) + { + return 1; + } + + if (lsm6dsox_mem_bank_set(&_reg_ctx, LSM6DSOX_USER_BANK) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_MD1_CFG, (uint8_t *)&md1_cfg, 1) != 0) + { + return 1; + } + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_MD2_CFG, (uint8_t *)&md2_cfg, 1) != 0) + { + return 1; + } + + if (lsm6dsox_tilt_flag_data_ready_get(&_reg_ctx, &tilt_ia) != 0) + { + return 1; + } + + if ((md1_cfg.int1_ff == 1U) || (md2_cfg.int2_ff == 1U)) + { + if (wake_up_src.ff_ia == 1U) + { + status->FreeFallStatus = 1; + } + } + + if ((md1_cfg.int1_wu == 1U) || (md2_cfg.int2_wu == 1U)) + { + if (wake_up_src.wu_ia == 1U) + { + status->WakeUpStatus = 1; + } + } + + if ((md1_cfg.int1_single_tap == 1U) || (md2_cfg.int2_single_tap == 1U)) + { + if (tap_src.single_tap == 1U) + { + status->TapStatus = 1; + } + } + + if ((md1_cfg.int1_double_tap == 1U) || (md2_cfg.int2_double_tap == 1U)) + { + if (tap_src.double_tap == 1U) + { + status->DoubleTapStatus = 1; + } + } + + if ((md1_cfg.int1_6d == 1U) || (md2_cfg.int2_6d == 1U)) + { + if (d6d_src.d6d_ia == 1U) + { + status->D6DOrientationStatus = 1; + } + } + + if (int1_ctrl.int1_step_detector == 1U) + { + if (func_src.step_detected == 1U) + { + status->StepStatus = 1; + } + } + + if ((int1_ctrl.int1_tilt == 1U) || (int2_ctrl.int2_tilt == 1U)) + { + if (tilt_ia == 1U) + { + status->TiltStatus = 1; + } + } + + return 0; +} + +/** + * @brief Set self test + * @param val the value of st_xl in reg CTRL5_C + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_x_self_test(uint8_t val) +{ + lsm6dsox_st_xl_t reg; + + reg = (val == 0U) ? LSM6DSOX_XL_ST_DISABLE + : (val == 1U) ? LSM6DSOX_XL_ST_POSITIVE + : (val == 2U) ? LSM6DSOX_XL_ST_NEGATIVE + : LSM6DSOX_XL_ST_DISABLE; + + if (lsm6dsox_xl_self_test_set(&_reg_ctx, reg) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX GYRO data ready bit value + * @param status the status of data ready bit + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_g_drdy_status(uint8_t *status) +{ + if (lsm6dsox_gy_flag_data_ready_get(&_reg_ctx, status) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set self test + * @param val the value of st_xl in reg CTRL5_C + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_g_self_test(uint8_t val) +{ + lsm6dsox_st_g_t reg; + + reg = (val == 0U) ? LSM6DSOX_GY_ST_DISABLE + : (val == 1U) ? LSM6DSOX_GY_ST_POSITIVE + : (val == 2U) ? LSM6DSOX_GY_ST_NEGATIVE + : LSM6DSOX_GY_ST_DISABLE; + + + if (lsm6dsox_gy_self_test_set(&_reg_ctx, reg) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX FIFO number of samples + * @param num_samples number of samples + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_num_samples(uint16_t *num_samples) +{ + if (lsm6dsox_fifo_data_level_get(&_reg_ctx, num_samples) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX FIFO full status + * @param status FIFO full status + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_full_status(uint8_t *status) +{ + lsm6dsox_reg_t reg; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_FIFO_STATUS2, ®.byte, 1) != 0) + { + return 1; + } + + *status = reg.fifo_status2.fifo_full_ia; + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO full interrupt on INT1 pin + * @param status FIFO full interrupt on INT1 pin status + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_int1_fifo_full(uint8_t status) +{ + lsm6dsox_reg_t reg; + + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_INT1_CTRL, ®.byte, 1) != 0) + { + return 1; + } + + reg.int1_ctrl.int1_fifo_full = status; + + if (lsm6dsox_write_reg(&_reg_ctx, LSM6DSOX_INT1_CTRL, ®.byte, 1) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO watermark level + * @param watermark FIFO watermark level + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_watermark_level(uint16_t watermark) +{ + if (lsm6dsox_fifo_watermark_set(&_reg_ctx, watermark) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO stop on watermark + * @param status FIFO stop on watermark status + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_stop_on_fth(uint8_t status) +{ + if (lsm6dsox_fifo_stop_on_wtm_set(&_reg_ctx, status) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO mode + * @param mode FIFO mode + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_mode(uint8_t mode) +{ + int ret = 0; + + /* Verify that the passed parameter contains one of the valid values. */ + switch ((lsm6dsox_fifo_mode_t)mode) + { + case LSM6DSOX_BYPASS_MODE: + case LSM6DSOX_FIFO_MODE: + case LSM6DSOX_STREAM_TO_FIFO_MODE: + case LSM6DSOX_BYPASS_TO_STREAM_MODE: + case LSM6DSOX_STREAM_MODE: + break; + + default: + ret = 1; + break; + } + + if (ret == 1) + { + return ret; + } + + if (lsm6dsox_fifo_mode_set(&_reg_ctx, (lsm6dsox_fifo_mode_t)mode) != 0) + { + return 1; + } + + return ret; +} + +/** + * @brief Get the LSM6DSOX FIFO tag + * @param tag FIFO tag + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_tag(uint8_t *tag) +{ + lsm6dsox_fifo_tag_t tag_local; + + if (lsm6dsox_fifo_sensor_tag_get(&_reg_ctx, &tag_local) != 0) + { + return 1; + } + + *tag = (uint8_t)tag_local; + + return 0; +} + +/** + * @brief Get the LSM6DSOX FIFO raw data + * @param data FIFO raw data array [6] + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_data(uint8_t *data) +{ + if (lsm6dsox_read_reg(&_reg_ctx, LSM6DSOX_FIFO_DATA_OUT_X_L, data, 6) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX FIFO accelero single sample (16-bit data per 3 axes) and calculate acceleration [mg] + * @param acceleration FIFO accelero axes [mg] + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_x_axes(int32_t *acceleration) +{ + uint8_t data[6]; + int16_t data_raw[3]; + float sensitivity = 0.0f; + float acceleration_float[3]; + + if (get_fifo_data(data) != 0) + { + return 1; + } + + data_raw[0] = ((int16_t)data[1] << 8) | data[0]; + data_raw[1] = ((int16_t)data[3] << 8) | data[2]; + data_raw[2] = ((int16_t)data[5] << 8) | data[4]; + + if (get_x_sensitivity(&sensitivity) != 0) + { + return 1; + } + + acceleration_float[0] = (float)data_raw[0] * sensitivity; + acceleration_float[1] = (float)data_raw[1] * sensitivity; + acceleration_float[2] = (float)data_raw[2] * sensitivity; + + acceleration[0] = (int32_t)acceleration_float[0]; + acceleration[1] = (int32_t)acceleration_float[1]; + acceleration[2] = (int32_t)acceleration_float[2]; + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO accelero BDR value + * @param bdr FIFO accelero BDR value + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_x_bdr(float bdr) +{ + lsm6dsox_bdr_xl_t new_bdr; + + new_bdr = (bdr <= 0.0f) ? LSM6DSOX_XL_NOT_BATCHED + : (bdr <= 12.5f) ? LSM6DSOX_XL_BATCHED_AT_12Hz5 + : (bdr <= 26.0f) ? LSM6DSOX_XL_BATCHED_AT_26Hz + : (bdr <= 52.0f) ? LSM6DSOX_XL_BATCHED_AT_52Hz + : (bdr <= 104.0f) ? LSM6DSOX_XL_BATCHED_AT_104Hz + : (bdr <= 208.0f) ? LSM6DSOX_XL_BATCHED_AT_208Hz + : (bdr <= 416.0f) ? LSM6DSOX_XL_BATCHED_AT_417Hz + : (bdr <= 833.0f) ? LSM6DSOX_XL_BATCHED_AT_833Hz + : (bdr <= 1660.0f) ? LSM6DSOX_XL_BATCHED_AT_1667Hz + : (bdr <= 3330.0f) ? LSM6DSOX_XL_BATCHED_AT_3333Hz + : LSM6DSOX_XL_BATCHED_AT_6667Hz; + + if (lsm6dsox_fifo_xl_batch_set(&_reg_ctx, new_bdr) != 0) + { + return 1; + } + + return 0; +} + +/** + * @brief Get the LSM6DSOX FIFO gyro single sample (16-bit data per 3 axes) and calculate angular velocity [mDPS] + * @param angular_velocity FIFO gyro axes [mDPS] + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::get_fifo_g_axes(int32_t *angular_velocity) +{ + uint8_t data[6]; + int16_t data_raw[3]; + float sensitivity = 0.0f; + float angular_velocity_float[3]; + + if (get_fifo_data(data) != 0) + { + return 1; + } + + data_raw[0] = ((int16_t)data[1] << 8) | data[0]; + data_raw[1] = ((int16_t)data[3] << 8) | data[2]; + data_raw[2] = ((int16_t)data[5] << 8) | data[4]; + + if (get_g_sensitivity(&sensitivity) != 0) + { + return 1; + } + + angular_velocity_float[0] = (float)data_raw[0] * sensitivity; + angular_velocity_float[1] = (float)data_raw[1] * sensitivity; + angular_velocity_float[2] = (float)data_raw[2] * sensitivity; + + angular_velocity[0] = (int32_t)angular_velocity_float[0]; + angular_velocity[1] = (int32_t)angular_velocity_float[1]; + angular_velocity[2] = (int32_t)angular_velocity_float[2]; + + return 0; +} + +/** + * @brief Set the LSM6DSOX FIFO gyro BDR value + * @param bdr FIFO gyro BDR value + * @retval 0 in case of success, an error code otherwise + */ +int LSM6DSOXSensor::set_fifo_g_bdr(float bdr) +{ + lsm6dsox_bdr_gy_t new_bdr; + + new_bdr = (bdr <= 0.0f) ? LSM6DSOX_GY_NOT_BATCHED + : (bdr <= 12.5f) ? LSM6DSOX_GY_BATCHED_AT_12Hz5 + : (bdr <= 26.0f) ? LSM6DSOX_GY_BATCHED_AT_26Hz + : (bdr <= 52.0f) ? LSM6DSOX_GY_BATCHED_AT_52Hz + : (bdr <= 104.0f) ? LSM6DSOX_GY_BATCHED_AT_104Hz + : (bdr <= 208.0f) ? LSM6DSOX_GY_BATCHED_AT_208Hz + : (bdr <= 416.0f) ? LSM6DSOX_GY_BATCHED_AT_417Hz + : (bdr <= 833.0f) ? LSM6DSOX_GY_BATCHED_AT_833Hz + : (bdr <= 1660.0f) ? LSM6DSOX_GY_BATCHED_AT_1667Hz + : (bdr <= 3330.0f) ? LSM6DSOX_GY_BATCHED_AT_3333Hz + : LSM6DSOX_GY_BATCHED_AT_6667Hz; + + if (lsm6dsox_fifo_gy_batch_set(&_reg_ctx, new_bdr) != 0) + { + return 1; + } + + return 0; +} + + + +int32_t LSM6DSOX_io_write(void *handle, uint8_t WriteAddr, uint8_t *pBuffer, uint16_t nBytesToWrite) +{ + return ((LSM6DSOXSensor *)handle)->io_write(pBuffer, WriteAddr, nBytesToWrite); +} + +int32_t LSM6DSOX_io_read(void *handle, uint8_t ReadAddr, uint8_t *pBuffer, uint16_t nBytesToRead) +{ + return ((LSM6DSOXSensor *)handle)->io_read(pBuffer, ReadAddr, nBytesToRead); +}